Journals / Environmental Research and Technology / 2019 / Cilt: 2 - Sayı: 3

Effect of stirring device on CuO dissolution by glycine

Pages
103–111
Publication Date
2019-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that the variation of glycine and NaOH concentrations as well as CuO loading influenced slightly the dissolution of CuO while temperature, the volume of solution and the nature of stirring impacted greatly the dissolution process.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study the leaching of CuO particles by glycine, an environmentally friendly leachant, was investigated under different conditions.
📊
Key Findings & Data:In fact, increasing the volume of solution from 105 to 405 mL decreased the dissolution of CuO from 100% to 26.2% registered after 180 min respectively under magnetic stirring, while it increased from 43.5% to 91.7% respectively under the same conditions with mechanical stirring.
💡
Conclusion & Impact:It was found that the variation of glycine and NaOH concentrations as well as CuO loading influenced slightly the dissolution of CuO while temperature, the volume of solution and the nature of stirring impacted greatly the dissolution process.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:CuO particles · glycine · dissolution

Abstract

In this study the leaching of CuO particles by glycine, an environmentally friendly leachant, was investigated under different conditions. It was found that the variation of glycine and NaOH concentrations as well as CuO loading influenced slightly the dissolution of CuO while temperature, the volume of solution and the nature of stirring impacted greatly the dissolution process. Magnetic and mechanical stirring registered inverse effects. In fact, increasing the volume of solution from 105 to 405 mL decreased the dissolution of CuO from 100% to 26.2% registered after 180 min respectively under magnetic stirring, while it increased from 43.5% to 91.7% respectively under the same conditions with mechanical stirring. Thus, the nature of stirring is a crucial parameter that may radically change the dissolution results. The dissolution was found to be controlled by chemical reaction.

🔖

Cite This Article

Lakhel, N., Djerad, S. (2019). Effect of stirring device on CuO dissolution by glycine. Environmental Research and Technology, Cilt: 2 - Sayı: 3, 103–111. https://ajindex.com/articles/754279

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . M. Kermiche, S. Djerad, ′′Facilitated transport of copper through bulk liquid membrane containing di-2ethylhexyl phosphoric acid′′, Desalination and Water Treatment Vol. 36, pp. 261-269, 2011. [2]. T. Miyahara, H. Kanzaki, R. Hamadab, S. Kuroiwa, S. Nishiyama, S. Tsuruya, ′′Liquid-phase oxidation of benzene to phenol by CuO-Al2O3 catalysts prepared by co-precipitation method′′, Journal of Molecular Catalysis A: Chemical, Vol. 176, pp. 141–150, 2001.[3]. N. Alane, S. Djerad, L. Tifouti, ′′Acid Leaching of Zinc From ZnO/Al2O3 Catalyst′′, Lebanese Science Journal Vol. 9, pp. 63-74, 2008.[4] I. Boukerche, N. Habbache, N. Alane, S. Djerad, L. Tifouti, ′′Dissolution of Cobalt from CoO/Al2O3 Catalyst with Mineral Acids′′, Industrial Engineering and Chemistry Research Vol. 49, pp. 6514–6520, 2010.[5]. R. Larba, I. Boukerche, N. Alane, N. Habbache, S. Djerad, L. Tifouti, ′′Citric acid as an alternative lixiviant for zinc oxide dissolution′′, Hydrometallurgy Vol.134-135, pp.117–123, 2013. [6]. J.J. Eksteen, E.A. Oraby, ′′The leaching and adsorption of gold using low concentration amino acids and hydrogen peroxide: effect of catalytic ions, sulphide minerals and amino acid type′′, Minerals Engineering Vol. 70, pp. 36-42, 2015.[7]. N. Habbache, S. Djerad, L. Tifouti, ′′Optimization of the operation conditions for NiO dissolution with different leachants′′, Process Engineering Journal Vol.1, pp. 59–67, 2017.[8]. E.A. Oraby, J.J. Eksteen, ′′The leaching of gold, silver and their alloys in alkaline glycine-peroxide solutions and their adsorption on carbon′′, Hydrometallurgy Vol.152, pp. 199-203, 2015.[9]. B.C. Tanda, J.J. Eksteen, E.A. Oraby, ′′An investigation into the leaching behavior of copper oxide minerals in aqueous alkaline glycine solutions′′, Hydrometallurgy Vol. 167, pp. 153-162, 2017.[10]. V.Ya. Yablokov, I.L. Smel’tsova, I.A. Zelyaev, S.V. Mitrofanova, ′′Studies of the rates of thermal decomposition of glycine, alanine and serine′′, Russian Journal of General Chemistry Vol. 79, pp. 1704-1706, 2009.[11]. E.A. Oraby, J.J. Eksteen, ′′The selective leaching of copper from gold-copper concentrate in glycine solutions′′, Hydrometallurgy Vol.150, pp. 14-19, 2014.[12]. D. Feng, J.S.J. Van Deventer, ′′The role of amino acids in the thiosulphate leaching of gold′′, Minerals Engineering Vol. 24, pp. 1022-1024, 2011.[13]. N. Harnby, M.F. Edwards, A.W. Nienow, ′′Mixing in the Process Industries′′, Butterworth-Heinemann 2nd Ed, Oxford 2001.[14]. G.Tati'erson, R.Calab