Journals / Environmental Research and Technology / 2019 / Cilt: 2 - Sayı: 4

The kinetics of the oxidation of ammonia on a V2O5/TiO2 SCR catalyst deactivated in an engine rig. Part I. Determination of kinetic parameters by simulation

Pages
211–221
Publication Date
2019-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The changes in the kinetics of the catalytic NH3 oxidation by deactivation is reported for the first time in the present study.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:It is shown how the deactivation of a diesel SCR (Selective Catalytic Reduction) catalyst by compounds in the exhaust gases influences the kinetics of the catalyst.
📊
Key Findings & Data:Results are given for the fresh (4.56 % V2O5/TiO2) catalyst and the ones used in the rig for 890 h and 2299 h.
💡
Conclusion & Impact:The changes in the kinetics of the catalytic NH3 oxidation by deactivation is reported for the first time in the present study.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Oxidation of ammonia · poisoning and kinetics · Vanadia SCR diesel catalysts

Abstract

It is shown how the deactivation of a diesel SCR (Selective Catalytic Reduction) catalyst by compounds in the exhaust gases influences the kinetics of the catalyst. Results are given for the fresh (4.56 % V2O5/TiO2) catalyst and the ones used in the rig for 890 h and 2299 h. The reactions of 700 ppm NH3 and 2 % O2 in Helium yielded N2, N2O, and NO at increasing temperatures. Simulations were performed with COMSOL Multiphysics using a 3-D model of the catalyst system. The experimental values of the products N2, N2O, and NO were very nicely fitted by the kinetic model used. All three ammonia oxidation reaction rates were of the first order in the concentration of NH3. A preliminary study using non-isothermal conditions showed the maximal temperature increase to be 0.15 K. Thus, further simulations were done with an isothermal model. The deactivation reduces the pre-exponential factors and the activation energies for the formation of N2, N2O, and NO. The formation of N2 is not substantially influenced by deactivation. The changes in the kinetics of the catalytic NH3 oxidation by deactivation is reported for the first time in the present study.

🔖

Cite This Article

ODENBRAND, İ. (2019). The kinetics of the oxidation of ammonia on a V2O5/TiO2 SCR catalyst deactivated in an engine rig. Part I. Determination of kinetic parameters by simulation. Environmental Research and Technology, Cilt: 2 - Sayı: 4, 211–221. https://ajindex.com/articles/754276

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (26)

  1. Konstandopoulos A, Zarvalis D, Chasapidis L, Deloglou L, Vlachos N, Kotbra A, Anderson G (2017) SAE Int. J. Engines 10 (4): 1653
  2. Jung H, Kittelson DB, Zachariah MR, (2003) SAE Technical Paper 2003-01-3179
  3. Odenbrand CUI, Catalysis Letters, 2019, DOI 10.1007/s10562-019-02892-7 [4] Koebel M, Elsener M (1998) Chem. Eng. Sci. 53 (4): 657
  4. Ozkan US, Cai Y, Kuthekar MW, Zhang L (1993) J. Catal. 142:182
  5. Ozkan US, Cai Y, Kuthekar MW (1994) J. Catal. 149:375
  6. Duffy BL, Curry-Hyde HE, Cant NW, Nelson PF (1994) J. Phys. Chem. 98: 7153
  7. Efstathiou AM, Fliatoura K (1995) Appl. Catal. B: Environ. 6:35
  8. Yates M, Martín JA, Martín-Luengo MA, Suárez S, Blanco J (2005) Catal. Today 107-108: 120
  9. Djerad S, Crocoll M, Kureti S, Tifouti L, Weisweler W (2006) Catal. Today 113: 208
  10. Lietti L, Nova I, Forzatti P (2000) Topics in Catalysis 11/12:111
  11. Odenbrand CUI (2017) Top. Catal. 60: 1317
  12. Odenbrand CUI (2018) Appl. Catal B: Environ.234: 365
  13. Roduit B, Wokaun A, Baiker A (1998) Ind. Eng. Chem. Res. 37: 4577
  14. Koebel M, Elsener M (1998) Chem. Eng. Sci. 53(4): 657
  15. Chen C-T, Tan W-L (2012) J. of the Taiwan Institute of Chemical Engineers 43:409
  16. Nahavandi M (2015) Brazilian J. of Chem. Eng. 32(4): 875
  17. Yun BK, Kim MY (2013) Appl. Thermal Engineering 50:152
  18. Scheuer A, Hauptmann W, Drochner A, Gieshoff J, Vogel H, Votsmeier M (2012) Appl. Catal. B: Environ. 111-112: 445. [20] http://www.engineersedge.com/heat_transfer/convective_heat_transfer_ coefficients 13378
  19. Brandin JGM, Odenbrand CUI (2017) Topic. Catal. 60: 1306
  20. Brandin JGM, Odenbrand CUI (2018) Catal. Lett. 148(1): 312
  21. Vaimakis TC, Pomonis PJ, Sdoukos AT (1990) Thermochimica Acta 168:103
  22. Metkar PS, Balakotaiah V, Harold MP (2011) Chem. Eng. Sci. 66:5192
  23. Salehi S, Moghaddam MA, Sahebjamee N (2016) International Journal of Engineering 29(9):1183
  24. Om J, Ji P, Wu W (2015) Asia-Pacific Energy Equipment Engineering Research Conference AP3ER 2015:56
  25. Schaub G, Unruh D, Wang J, Turek T (2003) Chemical Engineering and Processing 42:365
  26. Millo F, Rafigh M, Fino D, Micelli P (2017) Fuel 198:183.