Journals / Environmental Research and Technology / 2021 / Cilt: 4 - Sayı: 1

Pre-irradiation grafting of acrylic acid and sodium styrene sulfonate on non-woven polyethylene fabric for heavy metal removal

Pages
63–72
Publication Date
2021-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

From all the findings it can be expected that the AAc-SSS grafted PE fabric can successfully eliminate Cr(III) and Pb(II) from industrial waste water.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In present study acrylic acid (AAc) and sodium styrene sulfonate (SSS) were grafted onto non-woven polyethylene fabric using pre-irradiation method and the grafted adsorbent is employed for Cr(III) and Pb(II) adsorption.
📊
Key Findings & Data:After irradiation of the non-woven polyethylene fabrics with 50 kGy radiation dose the grafting reaction was carried out at 80º C with monomer solution consisted of 30% AAc, 10% SSS and 4% NaCl in water.
💡
Conclusion & Impact:From all the findings it can be expected that the AAc-SSS grafted PE fabric can successfully eliminate Cr(III) and Pb(II) from industrial waste water.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Heavy metal · acrylic acid · sodium styrene sulfonate

Abstract

In present study acrylic acid (AAc) and sodium styrene sulfonate (SSS) were grafted onto non-woven polyethylene fabric using pre-irradiation method and the grafted adsorbent is employed for Cr(III) and Pb(II) adsorption. After irradiation of the non-woven polyethylene fabrics with 50 kGy radiation dose the grafting reaction was carried out at 80º C with monomer solution consisted of 30% AAc, 10% SSS and 4% NaCl in water. A high graft yield of 270% was achieved. Fourier Transform Infrared, Scanning Electron Microscopy and Thermo-gravimetric Analysis were used to analyze the adsorbent. Pb (II) and Cr (III) adsorption from synthetic aqueous solution was attempted by the grafted adsorbent. Adsorption study was accomplished by changing the contact time, pH and initial metal ion concentration. Contact time 48 h and initial metal concentration 1000 ppm were found optimum for all the metal ions studied. pH 6.2 and 5 was observed best for Pb (II) and Cr(III) adsorption respectively. Kinetic adsorption data fitted better with pseudo-second-order equation than pseudo-first-order. Good correlation of experimental data with Langmuir isotherm model suggested monolayer adsorption. Langmuir equation showed that the maximum adsorption capacity for Pb (II) was 38.46 mg g-1 and Cr (III) was 111.11 mg g-1. Experiment on desorption of metal ions and reuse of the adsorbent depicted good results. Adsorbent also showed efficient adsorption of Cr(III) from real waste water. From all the findings it can be expected that the AAc-SSS grafted PE fabric can successfully eliminate Cr(III) and Pb(II) from industrial waste water.

🔖

Cite This Article

RAHMAN, N., BİSWAS, M. I., KABİR, M., DAFADER, N. C., SULTANA, S., SARDAR, M. N., AHMED, F. T., HALİM, A. (2021). Pre-irradiation grafting of acrylic acid and sodium styrene sulfonate on non-woven polyethylene fabric for heavy metal removal. Environmental Research and Technology, Cilt: 4 - Sayı: 1, 63–72. https://ajindex.com/articles/754236

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . S. Zhai, H. Xiao, Y. Shu, and Z. Zhao, “Countermeasures of heavy metal pollution”, Chinese Journal of Geochemistry, Vol. 32(4), pp. 446-450, 2013. [2]. N. Seko, M. Tamada, and F. Yoshii F, “Current status of adsorbent for metal ions with radiation grafting and crosslinking techniques”, Nuclear Instruments and Methods in Physics Research Section B, Vol. 236, pp.21–29, 2005. [3]. M. M. Marjub, N. Rahman, N.C. Dafader, F.S. Tuhen, S. Sultana, and F.T. Ahmed, “Acrylic acid-chitosan blend hydrogel: a novel polymer adsorbent for adsorption of lead(II) and copper(II) ions from wastewater”, Journal of Polymer Engineering, Vol. 39(10), pp. 883–891, 2019. [4]. H. Shrivastava, And B.U. Nair, “Protein Degradation by Peroxide Catalyzed by Chromium (III): Role of Coordinated Ligand”, Biochemical and Biophysical Research Communications, Vol. 270(3), pp. 749-754, 2000. [5]. S. Tong S, Y.E. von Schirnding, and T. Prapamontol T, “Environmental lead exposure: a public health problem of global dimensions”,. Bulletin of World Health Organization, Vol. 78 (9), pp. 1068-1077, 2000. [6]. S. Madala, S.K. Nadavala, S. Vudagandla, V.M. Boddu, and K. Abburi, “Equilibrium, kinetics and thermodynamics of Cadmium (II) biosorption on to composite chitosan biosorbent”, Arabian Journal of Chemistry, Vol. 10, pp. S1883–S1893, 2017. [7]. J. Peric, M. Trgo, and N.V. Medvidovic, “Removal of zinc, copper and lead by natural zeolite—a comparison of adsorption isotherms”, Water Research, Vol. 38, pp. 1893–1899, 2004. [8]. D. Balarak, Y. Mahdavi, E. Bazrafshan, A.H. Mahvi, and Y. Esfandyari, “Adsorption of fluoride from aqueous solutions by carbon nano- tubes: determination of equilibrium, kinetic, and thermodynamic parameters”, Fluoride, Vol. 49(1), pp. 71–83, 2016. [9]. E. Bazrafshan, A.A. Zarei, and F.K. Mostafapour, “Biosorption of cadmium from aqueous solutions by Trichoderma fungus: kinetic, thermodynamic, and equilibrium study”, Desalination and Water Treatment, Vol. 57(31), pp. 14598–14608, 2016. [10]. E. Bazrafshan, F. Kord Mostafapour, S. Rahdar, A.H. Mahvi, “Equilibrium and thermodynamics studies for decolorization of re- active black 5 (RB5) by adsorption onto MWCNTs”, Desalination and Water Treatment, Vol. 54(8), pp. 2241–2251, 2015. [11]. E. Bazrafshan, M. Ahmadabadi, and A.H. Mahvi, “Reactive Red-120 removal by activated carbon obtained from cumin herb wastes”, Fresenius Environmental Bulletin, Vol. 22(2a), pp. 584–590, 2013. [12]. E. Bazrafshan, P. Amirian, and A.H. Mahvi, an