Journals / Environmental Research and Technology / 2021 / Cilt: 4 - Sayı: 3

Undrained shear strength of polypropylene fiber reinforced alluvial clay

Pages
219–229
Publication Date
2021-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The laboratory results indicated that the cu of PP reinforced (1 % and 18 mm PP) alluvial clay deposits prepared in 0.5LL, 0.75LL, and LL water contents were 56.6, 20.7, and 8.4 kPa, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Construction of civil engineering structures on weak soil without taking necessary precautions may be risky.
📊
Key Findings & Data:To examine the moisture content effects on cu behavior of alluvial clay, samples were prepared in 0.50 liquid limit (LL), 0.75 LL, and LL water contents.
💡
Conclusion & Impact:The laboratory results indicated that the cu of PP reinforced (1 % and 18 mm PP) alluvial clay deposits prepared in 0.5LL, 0.75LL, and LL water contents were 56.6, 20.7, and 8.4 kPa, respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Alluvial soil · Polypropylene fiber · Undrained shear strength

Abstract

Construction of civil engineering structures on weak soil without taking necessary precautions may be risky. Alluvial soil that has not completed its geological formation has a high void ratio and contains organic material therefore, the strength properties of these soils should be examined carefully. In this study, the undrained shear strength (cu) behavior of natural and polypropylene (PP) fiber-reinforced alluvial clays was investigated with a laboratory Vane shear test. To examine the moisture content effects on cu behavior of alluvial clay, samples were prepared in 0.50 liquid limit (LL), 0.75 LL, and LL water contents. The PP fibers used were 6 and 18 mm long, they mixed with soil 0.1, 0.5, and 1% by dry weight of the sample. The Vane shear tests were performed at two different depths to investigate the overburden pressure effect. The increase in water content caused a significant decrease in cu. The laboratory results indicated that the cu of PP reinforced (1 % and 18 mm PP) alluvial clay deposits prepared in 0.5LL, 0.75LL, and LL water contents were 56.6, 20.7, and 8.4 kPa, respectively. The increase in PP fiber content increased the cu of alluvial clay deposits. The length of fiber was directly proportional to cu values. The effect of fiber was more pronounced in long fiber added samples. The cu of natural and %1 fiber reinforced (6 mm and 18 mm) samples prepared in the same water content were 27.4, 29.1, and 55.7 kPa. The cu increased with increasing penetration depth.

🔖

Cite This Article

ARSLAN, E., DÜZEN, İ., DEVELİOGLU, I., PULAT, H. F. (2021). Undrained shear strength of polypropylene fiber reinforced alluvial clay. Environmental Research and Technology, Cilt: 4 - Sayı: 3, 219–229. https://ajindex.com/articles/754210

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. American Society for Testing and Materials "ASTM D4648/D4648-00 Standard Test Method for Laboratory Miniature Vane Shear Test for Saturated Fine-Grained Clayey Soil ", ASTM International, West Conshohocken, PA, 2000. D.P. Stewart and M.F. Randolph, “T-bar penetration testing in soft clay,” Journal of Geotechnical Engineering, Vol.120(12), pp. 2230 – 2235, 1994. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:12(2230)
  2. D. Zreik, C. Ladd and J. Germaine, “A New Fall Cone Device for Measuring the Undrained Strength of Very Weak Cohesive Soils,” Geotechnical Testing Journal, Vol.18(4), pp. 472 – 482, 1995. https://doi.org/10.1520/GTJ11022J
  3. A. Ullah, M.S. Rahman and F. Ahammad, “Application of vane shear tools to assess the shear strength of remolded clay soil,” Research Journal of Engineering Sciences, Vol.6(1), pp. 1 – 4, 2017. http://www.isca.in/IJES/Archive/v6/i1/1.ISCA-RJEngS-2016-124.php
  4. L.J. Wilson, G.P. Kouretzis, J.A. Pineda and R.B. Kelly, “On the Determination of the Undrained Shear Strength from Vane Shear Testing in Soft Clays,” Australian Geomechanics Society, Sydney, 2016. http://ro.uow.edu.au/eispapers1/58
  5. Y. Wang, P. Guo, X. Li, H. Lin, Y. Liu and H. Yuan, “Behavior of Fiber-Reinforced and Lime-Stabilized Clayey Soil in Triaxial Tests,” Applied Sciences, Vol.9(900), pp. 1 – 15, 2019. https://doi.org/10.3390/app9050900 M.S. Nataraj and K.L. McManis, “Strength and Deformation Properties of Soils Reinforced with Fibrillated Fibers,” Geosynthetics International, Vol.4(1), pp. 65 – 79, 1997. https://doi.org/10.1680/gein.4.0089 Z.H. Ozkul and G. Baykal, “Shear behavior of compacted rubber fiber – clay composite in drained and undrained loading,” Journal of Geotechnical and Geoenvironmental Engineering, Vol.133(7), pp. 767 – 781, 2007. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:7(767) T. Maliakal and S. Thiyyakkandi, “Influence of Randomly Distributed Coir Fibers on Shear Strength of Clay,” Geotechnical and Geological Engineering, Vol.31(2), pp. 425 – 433, 2012. https://doi.org/10.1007/s10706-012-9595-1 O. Ple and T.N.H Le, “Effect of polypropylene fiber-reinforcement on the mechanical behavior of silty clay,” Geotextiles and Geomembranes, Vol.32, pp. 111 – 116, 2012. https://doi.org/10.1016/j.geotexmem.2011.11.004
  6. P.K. Pradhan, R.K. Kar and A. Naik, “Effect of random inclusion of polypropylene fibers on strength characteristics of cohesive soil,” Geotechnical and Geological Engineering, Vol.30(1), pp. 15 – 25, 2012. https://doi.org/10.1007/s107