Journals / Environmental Research and Technology / 2021 / Cilt: 4 - Sayı: 3

Textile wastewater treatment by UV/Fenton-like oxidation process using Fe-Cu doped pumice composite

Pages
206–218
Publication Date
2021-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The removals of COD, Abs-254 nm and Abs-280 nm were obtained to be 63.7%, 66.3% and 72.9%, while the removals of RES-436, RES-525 and RES-620 were observed as 92.9%, 96.7% and 98.1%, respectively at optimum doses of catalyst (5 g/L Fe-Cu-P), oxidant (250 mg/L H2O2) and pH 3 after 3 h oxidation at room temperature.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, Fe-Cu-Pumice (Fe-Cu-P) composite was prepared to attempt it for UV/Fenton-like treatment of biologically treated textile wastewater by means of COD and color removal.
📊
Key Findings & Data:SEM-EDX analysis showed that Fe-Cu-P composite contained Fe and Cu at 3.5% of each one.
💡
Conclusion & Impact:The removals of COD, Abs-254 nm and Abs-280 nm were obtained to be 63.7%, 66.3% and 72.9%, while the removals of RES-436, RES-525 and RES-620 were observed as 92.9%, 96.7% and 98.1%, respectively at optimum doses of catalyst (5 g/L Fe-Cu-P), oxidant (250 mg/L H2O2) and pH 3 after 3 h oxidation at room temperature.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Cu-Fe-pumice composite catalyst · SEM-EDX · UV/Fenton like process

Abstract

In this study, Fe-Cu-Pumice (Fe-Cu-P) composite was prepared to attempt it for UV/Fenton-like treatment of biologically treated textile wastewater by means of COD and color removal. SEM-EDX analysis showed that Fe-Cu-P composite contained Fe and Cu at 3.5% of each one. More than 95% color (RES-436, RES-525, RES-620) removal could be achieved using 3 g/L Fe-Cu-P in the Fenton-like process. The removal of COD and absorbances at Abs-254 nm and Abs-280 nm increased up to 5 g/L Fe-Cu-P concentration. In addition, the highest COD, Abs-254 nm and Abs-280 nm removal could be achieved at 250 mg/L H2O2 concentration pH 3. The removals of COD, Abs-254 nm and Abs-280 nm were obtained to be 63.7%, 66.3% and 72.9%, while the removals of RES-436, RES-525 and RES-620 were observed as 92.9%, 96.7% and 98.1%, respectively at optimum doses of catalyst (5 g/L Fe-Cu-P), oxidant (250 mg/L H2O2) and pH 3 after 3 h oxidation at room temperature.

🔖

Cite This Article

CİFCİ, D. İ., PAGANO, S. M. (2021). Textile wastewater treatment by UV/Fenton-like oxidation process using Fe-Cu doped pumice composite. Environmental Research and Technology, Cilt: 4 - Sayı: 3, 206–218. https://ajindex.com/articles/754209

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Referans1 T. Rashid, D. Iqbal, A. Hazafa, S. Hussain, F. Sher, F. Sher, “Formulation of zeolite supported nano-metallic catalyst and applications in textile effluent treatment”, Journal of Environmental Chemical Engineering, Vol 8(4), 104023, pp 1-9, 2020. Referans2 M. Bayrakdar, S. Atalay, G. Ersöz, “Efficient treatment for textile wastewater through sequential photo Fenton-like oxidation and adsorption processes for reuse in irrigation”, Ceramics International, in press, 2021. Referans3 N.Jaafarzadeh, A. Takdastan, S. Jorfi, F. Ghanbari, M. Ahmadi, G. Barzegar, “The performance study on ultrasonic/Fe3O4/H2O2 for degradation of azo dye and real textile wastewater treatment”, Journal of Molecular Liquids, Vol 256, pp. 462-470, 2018. Referans14 F. Duarte, L.M. Madeira, “Fenton- and photo-Fenton-like degradation of a textile dye by heterogeneous processes with Fe/ZSM-5 zeolite”, Separation Science and Technology, Vol 45(11), pp. 1512-1520, 2010. Referans5 E. GilPavas, I. Dobrosz-Gómez, M. Ángel Gómez-García, “Coagulation-flocculation sequential with Fenton or Photo-Fenton processes as an alternative for the industrial textile wastewater treatment”, Journal of Environmental Management, Vol 191, pp. 189-197, 2017. Referans6 Y. He, D.B. Jiang, D.Y. Jiang, J. Chen, Y.X. Zhang, “Evaluation of MnO2-templated iron oxide-coated diatomites for their catalytic performance in heterogeneous photo Fenton-like system”, Journal of Hazardous Materials, Vol 344, pp. 230-240, 2018. Referans7 M. Sheydaei, S. Aber, A. Khataee, “Preparation of a novel Ɣ-FeOOH-GAC nano composite fordecolorization of textile wastewater by photo Fenton-like process in acontinuous reactor”, Journal of Molecular Catalysis A: Chemical, Vol 392, pp. 229-234, 2014. Referans8 P.T. Almazán-Sánchez, P.W. Marin-Noriega, E. González-Mora, I. Linares-Hernández, M.J. Solache-Ríos, I.G. Martínez-Cienfuegos, V. Martínez-Miranda, “Treatment of indigo-dyed textile wastewater using solar photo-Fenton with iron-modified clay and copper-modified carbon”, Water, Air, & Soil Pollution, vol 228(294), pp. 1-15, 2017. Referans9 D.İ. Çifçi, S. Meriç, “A review on pumice for water and wastewater treatment”, Desalination and Water Treatment, vol. 57, pp. 18131-18143, 2016. Referans10 D.İ. Çifçi, S. Meriç, “Synthesis of magnetite iron pumice composite for heterogeneous Fenton-like oxidation of dyes”, Advances in Environmental Research, Vol 9, pp. 161-173, 2020. Referans11 C. Erat, D.İ. Çifçi, S. Meriç, “Fenton-like oxidation