Journals / Environmental Research and Technology / 2022 / Cilt: 5 - Sayı: 2

Degradation and mineralization of tetracycline by Fenton process

Pages
181–187
Publication Date
2022-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The cost of removing 1 kg of tetracycline from the unit costs of chemicals and energy used in the Fenton process was found to be 1.527$.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, we aimed to systematically optimize the operating parameters in the degradation and mineralization of tetracycline by Fenton process.
📊
Key Findings & Data:For this purpose; optimum values were found for Fe2+ concentration, H2O2 concentration and pH, reaction time, sedimentation times which are effective operating parameters in Fenton process.
💡
Conclusion & Impact:The cost of removing 1 kg of tetracycline from the unit costs of chemicals and energy used in the Fenton process was found to be 1.527$.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Antibiotics · degradation · fenton process

Abstract

In this study, we aimed to systematically optimize the operating parameters in the degradation and mineralization of tetracycline by Fenton process. For this purpose; optimum values were found for Fe2+ concentration, H2O2 concentration and pH, reaction time, sedimentation times which are effective operating parameters in Fenton process. In this study where initial tetracycline concentration was used as 100 mg/L; optimum values were found as 4 for pH, 30 mg/L for Fe2+ concentration, 100 mg/L for H2O2 concentration and 10 min for reaction time and 90 min for sedimentation time. Under these conditions, the TC degradation was 100%, while the COD removal efficiency was approximately 94%. As a result of kinetic studies, BMG is the most suitable kinetic model in terms of tetracycline degradation, while it is seen that the most suitable kinetic model for tetracycline mineralization in terms of COD is the first-order kinetic model. The cost of removing 1 kg of tetracycline from the unit costs of chemicals and energy used in the Fenton process was found to be 1.527$.

🔖

Cite This Article

GÜRTEKİN, E., ÇELİK, M., AYDIN, E., ÇELİK, A. (2022). Degradation and mineralization of tetracycline by Fenton process. Environmental Research and Technology, Cilt: 5 - Sayı: 2, 181–187. https://ajindex.com/articles/754182

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Y. Zhang, J. Shi, Z. Xu, Y. Chen, and D. Song, “Degradation of tetracycline in a schorl/H2O2 system: Proposed mechanism and intermediates,” Chemosphere, Vol. 202, pp. 661-668, 2018.
  2. J. Jeong, W. Song, W.J. Cooper, J. Jung, and J. Greaves, “Degradation of tetracycline antibiotics: mechanisms and kinetic studies for advanced oxidation/reduction processes,” Chemosphere, Vol. 78 (5), pp. 533-540, 2010.
  3. M.K. Liu, Y.Y. Liu, D.D. Bao, G. Zhu, G.H. Yang, J.F. Geng, and H.T. Li, “Effective removal of tetracycline antibiotics from water using hybrid carbon membranes,” Scientific Reports, Vol. 7 (1), pp. 1-8, 2017.
  4. Y. Zhang, J. Geng, H. Ma, H. Ren, K. Xu, and L. Ding, “Characterization of microbial community and antibiotic resistance genes in activated sludge under tetracycline and sulfamethoxazole selection pressure,” Science of the Total Environment, Vol. 571, pp. 479-486, 2016.
  5. E. Aydın, M. Şahin, E. Taşkan, H. Hasar, and M. Erdem, “Chlortetracycline removal by using hydrogen based membrane biofilm reactor,” Journal of Hazardous Materials, Vol. 320, pp. 88-95, 2016.
  6. M.G. Alalm, A. Tawfik, and S. Ookawara, “Degradation of four pharmaceuticals by solar photo-Fenton process: kinetics and costs estimation,” Journal of Environmental Chemical Engineering, Vol. 3 (1), pp. 46-51, 2015.
  7. M. Zouanti, M. Bezzina, and R. Dhib, “Experimental study of degradation and biodegradability of oxytetracycline antibiotic in aqueous solution using Fenton process,” Environmental Engineering Research, Vol. 25 (3), pp. 316-323, 2020.
  8. S.A. Mousavi, F. Farrokhi, N. Kianirad, and F. Falahi, “Degradation of aniline from aqueous solution by Fenton process: modeling and optimization,” Desalination and Water Treatment, Vol. 125, pp. 68-74, 2018. E. Gürtekin, and N. Şekerdağ, “An advanced oxidation process: Fenton process,” Pamukkale University Journal of Engineering Sciences, Vol. 14 (3), pp. 229-236, 2008. E. Elmolla, and M. Chaudhuri, “Optimization of Fenton process for treatment of amoxicillin, ampicillin and cloxacillin antibiotics in aqueous solution,” Journal of Hazardous Materials, Vol. 170 (2-3), pp. 666-672, 2009.
  9. S.P. Sun, H.Q. Guo, Q. Ke, J.H. Sun, S.H. Shi, M.L. Zhang, and Q. Zhou, “Degradation of antibiotic ciprofloxacin hydrochloride by photo-Fenton oxidation process,” Environmental Engineering Science, Vol. 26 (4), pp. 753-759, 2009.
  10. O. Rozas, D. Contreras, M.A. Mondaca, M. Pérez-Moya, and H.D. Mansilla, “Experimental design of Fenton and photo-Fenton reactions for the treatment of