Journals / Current Research in Dental Sciences / 2016 / Cilt: 26 - Sayı: 3

DEĞİŞİK YÖNTEMLERLE HAZIRLANAN METAL ALT YAPILAR ÜZERİNDEKİ VENEER PORSELENLERİNİN KIRILMA DİRENCİNE FARKLI ALT YAPI ŞEKİLLERİNİN ETKİSİNİN İNCELENMESİ≠

Pages
457–464
Publication Date
2016-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Key Words: Metal frameworks, coping design, fracture resistance

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Amaç: Bu çalışmada, değişik yöntemlerle hazırlanan metal alt yapılar üzerindeki veneer porselenlerinin kırılma direnci üzerine farklı alt yapı şekillerinin etkisi incelenmiştir.Materyal ve Metod: Chamfer bitim hatlı olarak kesilmiş üst 1. küçük azı dişini temsil eden metal güdükler anatomik oklüzal yüzeyli ve düz oklüzal yüzeyli olarak iki değişik şekilde CNC torna tezgahında hazırlanmış, alınan ölçülerden 30 adet epoksi rezin güdük elde edilmiştir.
📊
Key Findings & Data:Farklı yöntemlerle elde edilen metal alt yapılar üzerine üst yapı porseleni uygulanarak kuronlar hazırlanmıştır.
💡
Conclusion & Impact:Key Words: Metal frameworks, coping design, fracture resistance
🔬Design:Research Article
📍Scope:30 adet
⚙️Variables:Metal alt yapılar · alt yapı şekli

Özet

Amaç: Bu çalışmada, değişik yöntemlerle hazırlanan metal alt yapılar üzerindeki veneer porselenlerinin kırılma direnci üzerine farklı alt yapı şekillerinin etkisi incelenmiştir.Materyal ve Metod: Chamfer bitim hatlı olarak kesilmiş üst 1. küçük azı dişini temsil eden metal güdükler anatomik oklüzal yüzeyli ve düz oklüzal yüzeyli olarak iki değişik şekilde CNC torna tezgahında hazırlanmış, alınan ölçülerden 30 adet epoksi rezin güdük elde edilmiştir. Farklı yöntemlerle elde edilen metal alt yapılar üzerine üst yapı porseleni uygulanarak kuronlar hazırlanmıştır. Epoksi rezin güdükler kuronlar üzerine simante edilmiş ve veneer porselenlerinin kırılma dirençleri Universal test cihazında değerlendirilmiştir. Bulgular: Kırılma direnci değerleri üzerine alt yapı şekli ve hazırlama yöntemlerinin etkisinin anlamlı olduğu varyans analizi ile saptanmıştır (p<0.05).Sonuç: Çalışmada anatomik alt yapılar üzerinde freze tekniğiyle hazırlanan veneer seramiklerinde en yüksek kırılma direnci değerleri tespit edilmiştir. Anahtar Kelimeler: Metal alt yapılar, alt yapı şekli, kırılma direnci. AN ANALYSIS OVER THE EFFECT OF COPING DESIGN ON THE FRACTURE RESISTANCE OF VENEER PORCELAINS APPLIED ON METAL FRAMEWORKS PREPARED THROUGH VARIOUS METHODSABSTRACT Aim: In this study, the effect of different metal framework methods and coping design on the fracture resistance of veneer porcelains.Materials and Methods: Two different metal dies having anatomic and smooth occlusal surface designs were manufactured using CNC machine to simulate prepared upper first premolar tooth with chamfer finish line, impressions were taken and 30 epoxy resin dies were produced subsequently. Veneering ceramics were applied on metal frameworks which were produced by different methods and crowns were finished. Crowns were cemented on to the epoxy resin dies and fracture strength of veneering ceramics were evaluated using Universal Testing Machine.Results: Variance analyses demonstrated that framework design and manufacturing methods had a significant effect on fracture strength of tested specimens (p<0.05).Conclusion: In this study, veneering ceramics which were applied on anatomically shaped milled frame- works showed the highest fracture strength values. Key Words: Metal frameworks, coping design, fracture resistance

🔖

Cite This Article

DUYMUŞ, Z. Y., ALKURT, M. (2016). DEĞİŞİK YÖNTEMLERLE HAZIRLANAN METAL ALT YAPILAR ÜZERİNDEKİ VENEER PORSELENLERİNİN KIRILMA DİRENCİNE FARKLI ALT YAPI ŞEKİLLERİNİN ETKİSİNİN İNCELENMESİ≠. Current Research in Dental Sciences, Cilt: 26 - Sayı: 3, 457–464. https://ajindex.com/articles/735778

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. . Rosenstiel SF, Land M, Fujimoto J. Contemporary fixed prosthodontics. 3rd ed. St. Louis: Elsevier 2000:795-800. 2. Roberts DH. The failure of retainers in bridge prostheses. An analysis of retainers. Brit Dent J 1970;128:117-24. 3. Llobell A, Nicholls JI, Kois JC, Daly CH. Fatigue life of porcelain repair systems. Int J Prosthodont 1992;5:205-13. 4. Bonfante EA, Coelho PG, Bayardo-Gonzalez DE, Thompson VP, Bonfante G. Effect of framework design on crown failure. Eur J Oral Sci 2009;194-9. 5. Omori S, Komada W, Yoshida K, Miura H. Effect of thickness of zirconia-ceramic crown frameworks on strength and fracture pattern. Dent Mater J 2013;32: 189-94. 6. Akın E. Diş Hekimliğinde Porselen. 2th ed. İstanbul, İstanbul Üniversitesi Basımevi. 1983:p.1-26. 7. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003;89:268-74. 8. Craig RG. Restorative Properties in Restorative Dental Materials. New York: Mosby Publication, 2002: p.551-92. 9. Jones DW. Development of dental ceramics. An historical perspective. Dent Clin North Am 1985;29:621-44. 10. Anusavice K. In: Phillips' Science of Dental Materials.11th ed. Missouri, Saunders Publication 2003:p.655-719.
  2. Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide- partiallystabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil 2004;31:682-8. 22. Ambre MJ, Aschan F, Vult von Steyern P. Fracture strength of yttria-stabilized zirconium-dioxide (Y-TZP) fixed dental prostheses (FDPs) with different abutment core thicknesses and connector dimensions. J Prosthodontics 2013; 22:377-82. 23. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 2001;14:231-8. 24. Filser F, Luthy H, Kocher P, Scharer P, LJ. G. Posterior all-ceramic bridgework. Quintessence of Dental Technology, 2003;1:28-41. 25. Cho L, Choi J, Yi YJ, Park CJ. Effect of finish line variants on marginal accuracy and fracture strength of ceramic optimized polymer/fiber-reinforced composite crowns. J Prosthetic Dent 2004;91:554-60. 26. Piwowarczyk A, Lauer HC, Sorensen JA. In vitro shear bond strength of cementing agents to fixed prosthodontic restorative materials. J Prosthet Dent 2004;92:265-73. 27. Fabianelli A, Goracci C, Bertelli E, Monticelli F, Grandini S, Ferrari M. In vitro evaluation of wall-to-wall