Journals / Current Research in Dental Sciences / 2018 / Cilt: 28 - Sayı: 4

EVALUATION OF STRESS DISTRIBUTION OF DIFFERENT RESTORATIVE MATERIALS IN CLASS V CAVITIES

Pages
518–523
Publication Date
2018-10-14
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Sonuç: Çalışmamızın sınırları dahilinde, Sınıf V kaviteler için en düşük stres dağılımı hibrit kompozit rezinde elde edilmiştir.Anahtar Kelimeler: Sonlu elemanlar analizi, restoratif materyaller, stres dağılımı

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aim: The aim of present study was to assess the stress distribution of different restorative materials applied in a Class V cavity by finite element analysis.
📊
Key Findings & Data:Material and Methods: A 3D tooth model of a maxillary molar tooth was created for present study.
💡
Conclusion & Impact:Sonuç: Çalışmamızın sınırları dahilinde, Sınıf V kaviteler için en düşük stres dağılımı hibrit kompozit rezinde elde edilmiştir.Anahtar Kelimeler: Sonlu elemanlar analizi, restoratif materyaller, stres dağılımı
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Finite element analysis · restorative materials

Özet

Aim: The aim of present study was to assess the stress distribution of different restorative materials applied in a Class V cavity by finite element analysis. Material and Methods: A 3D tooth model of a maxillary molar tooth was created for present study. The cavity was created in the computer model. Study groups were created according to four different restorative materials (Group I: a hybrid resin-based composite, Group II: a flowable resin composite, Group III: a compomer, and Group IV: resin-modified glass ionomer cement). The von Mises stress distribution was evaluated loading of 400 N. Results: It was detected that the highest stress in Group II (301.21 MPa). However, it was observed that the lowest stress in Group I (235.74 MPa).Conclusion: Within the limitations of our study, the lowest stress distribution for Class V cavity was obtained in the hybrid composite resin. Keywords: Finite element analysis, restorative materials, stress distributionSINIF V KAVİTELERDE FARKLI RESTORATİF MATERYALLERİN STRES DAĞILIMININ DEĞERLENDİRİLMESİ ÖZAmaç: Bu çalışmanın amacı sonlu elemanlar analizi ile Sınıf V kavitede uygulanan farklı restoratif materyallerin stres dağılımını değerlendirmektir. Gereç ve Yöntem: Çalışma için bir maksiller sol birinci molar dişin üç boyutlu diş modeli oluşturuldu. Kavite bilgisayar ortamında hazırlandı. Dört farklı restoratif materyale göre çalışma grupları (Grup I: hibrid kompozit rezin, Grup II: akıcı kompozit rezin, Grup III: kompomer ve Grup IV: rezin modifiye cam iyonomer siman) oluşturuldu. 400 N’luk yük uygulanarak Von Mises stres dağılımı değerlendirildi.Bulgular: En yüksek stres Grup II’de (301,21 MPa) tespit edidi. Bununla birlikte, en düşük stres Grup I’de (235,74 MPa) gözlendi. Sonuç: Çalışmamızın sınırları dahilinde, Sınıf V kaviteler için en düşük stres dağılımı hibrit kompozit rezinde elde edilmiştir.Anahtar Kelimeler: Sonlu elemanlar analizi, restoratif materyaller, stres dağılımı

🔖

Cite This Article

GÜLER, M. S. (2018). EVALUATION OF STRESS DISTRIBUTION OF DIFFERENT RESTORATIVE MATERIALS IN CLASS V CAVITIES. Current Research in Dental Sciences, Cilt: 28 - Sayı: 4, 518–523. https://ajindex.com/articles/735739

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. No authors listed. Oral health in America: a report of the Surgeon General. J Calif Dent Assoc 2000; 28: 685-95
  2. Lima YB, Cury JA. Seasonal variation of fluoride intake by children in a subtropical region. Caries Res 2003; 37: 335-8
  3. Ana PA, Bachmann L, Zezell DM. Lasers effects on enamel for caries prevention. Laser Physics 2006; 16: 865-75
  4. Rodrigues LKA, Santos MN, Pereira D, Assaf AV, Pardi V. Carbon dioxide laser in dental caries prevention. J Dent 2004; 32: 531-40
  5. Cortellini D, Canale A, Giordano A, Bergantini B, Bergantini D. The combined use of all-ceramic and conventional metal-ceramic restorations in the rehabilitation of severe tooth wear. Quint Dent Technol 2005; 28: 205-14
  6. Lee HE, Lin CL, Wang CH, Cheng CH, Chang CH. Stresses at the cervical lesion of maxillary premolar-a finite element investigation. J Dent 2002; 30: 283-90
  7. Asmussen E, Peutzfeldt A. Class I and Class II restorations of resin composite: an FEM analysis of the influence of modulus of elasticity on stresses generated by occlusal loading. Dent Mater 2008; 24: 600-5
  8. Güler MS, Şen S, Bayındır YZ, Güler Ç. İnsan dişi kaplamalarinda kullanilan farkli özelliklerdeki yapiştirici simanlarin gerilme dağilimina etkilerinin sonlu elemanlar yöntemi ile incelenmesi. Atatürk Üniv Diş Hek Fak Derg 2012; 22: 31-9
  9. Guler MS, Guler C, Cakici F, Cakici EB, Sen S. Finite element analysis of thermal stress distribution in different restorative materials used in Class V cavities. Niger J Clin Pract 2016; 19: 30-4
  10. Folwaczny M, Loher C, Mehl A, Kunzelmann KH, Hinkel R. Toothcolored filling materials for the restoration of cervical lesions: a 24- month follow- up study. Oper Dent 2000; 25: 251-8
  11. Vasudeva G, Bogra P, Nikhil V, Singh V. Effect of occlusal restoration on stresses around Class V restoration interface: a finite-element study. Indian J Dent Res 2011; 22: 295-302
  12. Rees JS, Jacobsen PH. The effect of interfacial failure around a Class V composite restoration analysed by the finite element method. J Oral Rehabil 2000; 27: 111-6
  13. Rees JS, Jacobsen PH. The effect of cuspal flexure on a buccal Class V restoration: a finite element study. J Dent 1998; 26: 361-7
  14. N S, N M, Shetty A, Kumari A, DN N. Finite element analysis of stress concentration in Class V restorations of four groups of restorative materials in mandibular premolar. J Conserv Dent 2008; 11: 121-6
  15. Yaman SD, Sahin M, Aydin C. Finite element analysis of strength characteristics of