Journals / Current Research in Dental Sciences / 2019 / Cilt: 29 - Sayı: 1

THERMAL CONDUCTIVITY OF DIFFERENT COMPOSITE RESIN MATERIALS IN DIFFERENT POLYMERIZATION TIMES AND MODES

Pages
20–25
Publication Date
2019-01-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Anahtar Kelimeler: Termal iletkenlik, dental komozit rezin, LED ışık cihazı, Polimerizasyon süresi

📌 3 Key Takeaways

🎯
Objective & Hypothesis:ABSTRACT Aim: The current study investigated the thermal conductivity of dimethacrylate- and silorane-based composite resins at different polymerization times and modes.
📊
Key Findings & Data:Materials and Method: Forty dentin discs (8 mm diameter, 1.5 mm thick) were obtained from caries-free human molar teeth.
💡
Conclusion & Impact:Anahtar Kelimeler: Termal iletkenlik, dental komozit rezin, LED ışık cihazı, Polimerizasyon süresi
🔬Design:Survey & Empirical Study
📍Scope:Comprehensive Sample
⚙️Variables:Thermal conductivity · dental composite resin · LED curing unit

Özet

ABSTRACT Aim: The current study investigated the thermal conductivity of dimethacrylate- and silorane-based composite resins at different polymerization times and modes. Materials and Method: Forty dentin discs (8 mm diameter, 1.5 mm thick) were obtained from caries-free human molar teeth. Filtek Silorane (3M ESPE, Minnesota, USA) and Filtek Z550 (3M ESPE, Minnesota, USA) composite were polymerized with a LED (Light-Emitting-Diode) curing device (Valo, Ultradent Products Inc., Utah, USA), in two modes in different times (xtra power mode, 3200 mW/cm2; 3-, 6-, 9-, 12-, +2 s / standard mode 1000 mW/cm2, 10-, 20-, 30-, 40-, +2 s)(n=10). Temperature changes in the dentin discs were measured with a K-type thermocouple (E-680, Elimko Co., Ankara, Turkey) and recorded. Data were statistically analyzed using Analysis of variance and independent sample t test (α=0.05) Results: Mean temperature changes were significantly different among polymerization times and modes (p<0.05). Temperature change of Filtek Silorane were significantly higher than Filtek Z550 for each time interval and curing mode (p<0.05). Conclusion: As the polymerization time increases, the temperature increase in the dentin may adversely affect to the pulp health.Key Words: Thermal conductivity, dental composite resin, LED curing unit, polymerization timeFARKLI KOMPOZIT REZIN MATERYALLERIN FARKLI KÜRLEME SÜRELERINDE VE MODLARINDA TERMAL ILETKENLIKLERI ÖZ Amaç: Bu çalışmada siloran-esaslı ve dimetakrilat-esaslı kompozitlerin farklı polimerizasyon sürelerinde ve modlarında termal iletkenlikleri değerlendirildi Gereç ve Yöntem: Sağlam insan üçüncü molar dişlerinden 40 dentin disk (8 mm çap, 1.5 mm kalınlık) hazırlandı. Filtek Silorane (3M ESPE Dental Ürünleri, Minnesota, ABD) ve Filtek Z550 (3M ESPE Dental Ürünleri, Minnesota, ABD) kompozit örnekleri, led ışık cihazı ile (Valo, Ultradent Products Inc., Utah, ABD) iki farklı modda ve farklı sürelerde (xtra power mod, 3200 mW/cm2; 3, 6, 9, 12 +2 sn / standard mod 1000 mW/cm2, 10, 20, 30, 40, +2 sn) polimerize edildi. Dentin örneklerindeki sıcaklık artışı, K tipi termokapıl (E-680, Elimko Co., Ankara, Türkiye) kullanılarak ölçüldü. Her zaman aralığı arasındaki ölçüm farkları (ΔT) kaydedildi. Veriler ANOVA ve bağımsız örneklem t-testi ile analiz edildi. (α = 0.05) Bulgular: Farklı polimerizasyon süreleri ve modları arasında ortalama sıcaklık artışları açısından anlamlı farklılıklar tespit edildi (p <0.05). Filtek Silorane kompozitin polimerizasyonu sırasında tüm modlar ve zaman aralıklarında Filtek Z550'ye kıyasla anlamlı derecede daha yüksek sıcaklık artışı görüldü (p <0.05). Sonuç: Polimerizasyon süresi arttıkça dentindeki ısı artışı pulpa sağlığını olumsuz etkileyebilir. Anahtar Kelimeler: Termal iletkenlik, dental komozit rezin, LED ışık cihazı, Polimerizasyon süresi

🔖

Cite This Article

KARATAŞ, Ö., SAĞSÖZ, Ö., İLDAY, N. Ö., BAYINDIR, Y. Z. (2019). THERMAL CONDUCTIVITY OF DIFFERENT COMPOSITE RESIN MATERIALS IN DIFFERENT POLYMERIZATION TIMES AND MODES. Current Research in Dental Sciences, Cilt: 29 - Sayı: 1, 20–25. https://ajindex.com/articles/735728

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Uhl A, Volpel A, Sigusch BW. Influence of heat from light curing units and dental composite polymerization on cells in vitro. J Dent 2006; 34: 298-306
  2. Mills RW, Jandt KD, Ashworth SH. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J 1999; 186: 388-91
  3. Leung MK, Chang CC, Wu MH, Chuang KH, Lee JH, Shieh SJ, Lin SC, Chiu CF. 6-N,N-diphenylaminobenzofuran-derived pyran containing fluorescent dyes: a new class of high-brightness red-light-emitting dopants for OLED. Org Lett 2006, 8: 2623-6
  4. Yondem I, Altintas SH, Usumez A. Temperature rise during resin composite polymerization under different ceramic restorations. Eur J Dent 2011; 5: 305-9
  5. Dunn WJ, Taloumis LJ. Polymerization of orthodontic resin cement with light-emitting diode curing units. Am J Orthod Dentofac Orthop 2002; 122: 236-41
  6. Karataş Ö, Türel V, İlday N, Seven N. Anterior mine hipoplazisinin kompozit restorasyonlarla tedavisi: İki olgu sunumu. J Dent Fac Atatürk Uni 2013; 22: 371-4
  7. Nammour S, Zeinoun T, Bogaerts I, Lamy M, Geerts SO, Bou Saba S, Lamard L, Peremans A, Limme M. Evaluation of dental pulp temperature rise during photo-activated decontamination (PAD) of caries: an in vitro study. Lasers Med Sci 2010; 25: 651-4
  8. Masutani S, Setcos JC, Schnell RJ, Phillips RW. Temperature rise during polymerization of visible light-activated composite resins. Dent Mater 1988; 4: 174-8
  9. Peutzfeldt A. Resin composites in dentistry: the monomer systems. Eur J Oral Sci 1997; 105: 97-116
  10. Goodis HE, White JM, Andrews J, Watanabe LG. Measurement of temperature generated by visible-light-cure lamps in an in vitro model. Dent Mater 1989; 5: 230-4
  11. Atai M, Motevasselian F. Temperature rise and degree of photopolymerization conversion of nanocomposites and conventional dental composites. Clin Oral Investig, 2009, 13: 309-316
  12. Hussey DL, Biagioni PA, Lamey PJ. Thermographic measurement of temperature change during resin composite polymerization in vivo. J Dent 1995; 23: 267-71
  13. Ilday NO, Sagsoz O, Karatas O, Bayindir YZ, Celik N. Temperature changes caused by light curing of fiber-reinforced composite resins. J Conserv Dent 2015; 18: 223-226
  14. Karatas O, Turel V, Bayindir YZ. Temperature rise during polymerization of different cavity liners and composite resins. J Conserv Dent 2015; 18: 431-5
  15. Horai KI, Simmons G, Kanamori H, Wones D. Thermal diffusivity and conductivity of lunar material. Science 1970, 167: 730-1. 1