Journals / Current Research in Dental Sciences / 2022 / Cilt: 32 - Sayı: 1

FARKLI YÜZEY DEKONTAMİ̇NASYON YÖNTEMLERİ̇Nİ̇N CAD/CAM YÜZEYLERİ̇N BAĞLANMA DAYANIM DEĞERLERİ̇ ÜZERİ̇NE ETKİ̇Sİ

Pages
38–43
Publication Date
2022-02-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Keywords: CAD/CAM, resin ceramic, bond strength, contamination, saliva

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Amaç: Bu çalışmanın amacı, CAD/CAM yüzeylerinde gerçekleştirilen yapıştırma prosedürünün farklı aşamalarında gerçekleşen tükürük kontaminasyonun, su ya da etanol ile temizlenmesinin bağlanma dayanıma etkisini incelemektir.
📊
Key Findings & Data:Yöntemler: Cerasmart (GC) ve Shofu Block (Shofu) CAD/CAM materyallerden (7×7×2 mm) hazırlanan örnekler, otopolimerizan akrilik ile sabitlendi.
💡
Conclusion & Impact:Keywords: CAD/CAM, resin ceramic, bond strength, contamination, saliva
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:CAD/CAM · rezin seramik · bağlanma dayanımı

Abstract

Amaç: Bu çalışmanın amacı, CAD/CAM yüzeylerinde gerçekleştirilen yapıştırma prosedürünün farklı aşamalarında gerçekleşen tükürük kontaminasyonun, su ya da etanol ile temizlenmesinin bağlanma dayanıma etkisini incelemektir. Yöntemler: Cerasmart (GC) ve Shofu Block (Shofu) CAD/CAM materyallerden (7×7×2 mm) hazırlanan örnekler, otopolimerizan akrilik ile sabitlendi. Örneklerin yüzeyleri Al2O3 kum ile kumlandı, arkasından çalışma protokollerine göre şu şekilde gruplara ayrıldı: Grup-1(kontrol): Firma önerisi yapıştırma protokolü (Primer/Siman/Kompozit), Grup-2: Tükürük-kontaminasyonu / Su ile temizleme/Primer/Siman/Kompozit, Grup-3: Tükürük-kontaminasyonu / %70 etanol ile temizleme /Primer/Siman/Kompozit, Grup-4: Primer-uygulaması/ Tükürük-kontaminasyonu / Su ile temizleme / Tekrar primer-uygulaması/Siman/Kompozit, Grup-5: Primer-uygulaması / Tükürük-kontaminasyonu / %70 etanol ile temizleme / Tekrar-primer uygulaması /Siman/Kompozit. Her grup için CAD/CAM materyallere primer olarak Z-Prime Plus 10 sn uygulandı. Ardından hazırlanan kompozit rezinler (Clearfil Majesty ES-2, Kuraray), dual-cured rezin siman (Duo-Link Universal Light Curing Resin Cement, BİSCO) aracılığıyla yapıştırıldı. Örnekler 24 saat 37oC suda bekletildi ve bağlanma dayanım testine tabi tutuldu. Veriler tek yönlü varyans analizi (ANOVA) ve Tukey HSD testi kullanılarak analiz edildi (P < .05). Bulgular: En yüksek bağlanma dayanımı değeri Cerasmart Grup-1’de (19.86±5.27.), en düşük bağlanma dayanımı değeri Shofu Block HC Grup-5’te (13.02±4.83) bulundu (P = .67). Tükürük kontaminasyonun primer uygulamasından önce veya sonra gerçekleşmesi bağlanma dayanım değerlerini etkilemedi. Her iki materyal içinde dekontaminasyon işleminin su ya da %70 etanol ile gerçekleştirilmesi arasında istatistiksel olarak anlamlı farklılık bulunmadı. Sonuç: Kontaminasyonun primer uygulamasından önce veya sonra meydana gelmesinin bağlanma dayanımına etkisi bulunmamaktadır. Uygulanan her iki dekontaminasyon yöntemi de klinik olarak yeterli bağlanma dayanımı sağlamaktadır. Primer kullanımı, gelişmiş bağlanma dayanımı değerleri üzerinde etkilidir. Anahtar Kelimeler: CAD/CAM, rezin seramik, bağlanma dayanımı, kontaminasyon, tükürük The effect of different surface decontamination procedures on bond strength values of CAD/CAM restoratives Abstract Objective: The aim of this study is to examine the effect of saliva contamination, which occurs at different stages of the bonding procedure on CAD/CAM surfaces, on the bond strength of decontamination with water or ethanol. Methods: Samples prepared from GC Cerasmart and Shofu Block CAD/CAM materials (7×7×2 mm) were fixed with autopolymerizing acrylic. The surfaces of the samples were sandblasted with Al2O3, then were divided into groups according to study protocols. Group-1 (control): Company recommendation bonding protocol (Primer/Cement/Composite), Group-2: Saliva-contamination/Cleaning with water/primer/cement/composite, Group-3: Saliva-contamination/Cleaning with 70% ethanol/primer/cement/composite Group-4: Primer-application/Saliva-contamination/Cleaning with water/Re-primer-application/cement/composite, Group-5: Primer-application/Saliva-contamination/Cleaning with 70% ethanol/Re-primer-application/cement/composite. For each groups, Z-Prime Plus was applied to the CAD/CAM for 10-seconds as a primer. After, the composite resins (Clearfil Majesty ES-2, Kuraray) were bonded via dual-cured resin cement (Duo-Link resin cement, Bisco). The samples were kept in 37oC water for 24 hours and subjected to the bond strength test. Data were analyzed with one way Analysis of Variance (ANOVA) and Tukey HSD tests (P < .05). Results: The highest bond strength value was found in Cerasmart Group-1 (19.86±5.27.) and the lowest value was found in Shofu Block Group-5 (13.02±4.83) (P = .67). The occurrence of saliva contamination before or after primer didn’t affect the bond strength values. There was no statistically significant difference between decontamination with water or 70% ethanol for both materials. Conclusion: Contamination occurred before or after the primer has no effect on bond strength. Both decontamination methods provide clinically sufficient bond strength. The use of primer is effective on improved bond strength values. Keywords: CAD/CAM, resin ceramic, bond strength, contamination, saliva

Özet

Amaç: Bu çalışmanın amacı, CAD/CAM yüzeylerinde gerçekleştirilen yapıştırma prosedürünün farklı aşamalarında gerçekleşen tükürük kontaminasyonun, su ya da etanol ile temizlenmesinin bağlanma dayanıma etkisini incelemektir. Yöntemler: Cerasmart (GC) ve Shofu Block (Shofu) CAD/CAM materyallerden (7×7×2 mm) hazırlanan örnekler, otopolimerizan akrilik ile sabitlendi. Örneklerin yüzeyleri Al2O3 kum ile kumlandı, arkasından çalışma protokollerine göre şu şekilde gruplara ayrıldı: Grup-1(kontrol): Firma önerisi yapıştırma protokolü (Primer/Siman/Kompozit), Grup-2: Tükürük-kontaminasyonu / Su ile temizleme/Primer/Siman/Kompozit, Grup-3: Tükürük-kontaminasyonu / %70 etanol ile temizleme /Primer/Siman/Kompozit, Grup-4: Primer-uygulaması/ Tükürük-kontaminasyonu / Su ile temizleme / Tekrar primer-uygulaması/Siman/Kompozit, Grup-5: Primer-uygulaması / Tükürük-kontaminasyonu / %70 etanol ile temizleme / Tekrar-primer uygulaması /Siman/Kompozit. Her grup için CAD/CAM materyallere primer olarak Z-Prime Plus 10 sn uygulandı. Ardından hazırlanan kompozit rezinler (Clearfil Majesty ES-2, Kuraray), dual-cured rezin siman (Duo-Link Universal Light Curing Resin Cement, BİSCO) aracılığıyla yapıştırıldı. Örnekler 24 saat 37oC suda bekletildi ve bağlanma dayanım testine tabi tutuldu. Veriler tek yönlü varyans analizi (ANOVA) ve Tukey HSD testi kullanılarak analiz edildi (P < .05). Bulgular: En yüksek bağlanma dayanımı değeri Cerasmart Grup-1’de (19.86±5.27.), en düşük bağlanma dayanımı değeri Shofu Block HC Grup-5’te (13.02±4.83) bulundu (P = .67). Tükürük kontaminasyonun primer uygulamasından önce veya sonra gerçekleşmesi bağlanma dayanım değerlerini etkilemedi. Her iki materyal içinde dekontaminasyon işleminin su ya da %70 etanol ile gerçekleştirilmesi arasında istatistiksel olarak anlamlı farklılık bulunmadı. Sonuç: Kontaminasyonun primer uygulamasından önce veya sonra meydana gelmesinin bağlanma dayanımına etkisi bulunmamaktadır. Uygulanan her iki dekontaminasyon yöntemi de klinik olarak yeterli bağlanma dayanımı sağlamaktadır. Primer kullanımı, gelişmiş bağlanma dayanımı değerleri üzerinde etkilidir. Anahtar Kelimeler: CAD/CAM, rezin seramik, bağlanma dayanımı, kontaminasyon, tükürük Abstract Objective: The aim of this study is to examine the effect of saliva contamination, which occurs at different stages of the bonding procedure on CAD/CAM surfaces, on the bond strength of decontamination with water or ethanol. Methods: Samples prepared from GC Cerasmart and Shofu Block CAD/CAM materials (7×7×2 mm) were fixed with autopolymerizing acrylic. The surfaces of the samples were sandblasted with Al2O3, then were divided into groups according to study protocols. Group-1 (control): Company recommendation bonding protocol (Primer/Cement/Composite), Group-2: Saliva-contamination/Cleaning with water/primer/cement/composite, Group-3: Saliva-contamination/Cleaning with 70% ethanol/primer/cement/composite Group-4: Primer-application/Saliva-contamination/Cleaning with water/Re-primer-application/cement/composite, Group-5: Primer-application/Saliva-contamination/Cleaning with 70% ethanol/Re-primer-application/cement/composite. For each groups, Z-Prime Plus was applied to the CAD/CAM for 10-seconds as a primer. After, the composite resins (Clearfil Majesty ES-2, Kuraray) were bonded via dual-cured resin cement (Duo-Link resin cement, Bisco). The samples were kept in 37oC water for 24 hours and subjected to the bond strength test. Data were analyzed with one way Analysis of Variance (ANOVA) and Tukey HSD tests (P < .05). Results: The highest bond strength value was found in Cerasmart Group-1 (19.86±5.27.) and the lowest value was found in Shofu Block Group-5 (13.02±4.83) (P = .67). The occurrence of saliva contamination before or after primer didn’t affect the bond strength values. There was no statistically significant difference between decontamination with water or 70% ethanol for both materials. Conclusion: Contamination occurred before or after the primer has no effect on bond strength. Both decontamination methods provide clinically sufficient bond strength. The use of primer is effective on improved bond strength values. Keywords: CAD/CAM, resin ceramic, bond strength, contamination, saliva

🔖

Cite This Article

SANCAK, E. İ., TEKÇE, N. (2022). FARKLI YÜZEY DEKONTAMİ̇NASYON YÖNTEMLERİ̇Nİ̇N CAD/CAM YÜZEYLERİ̇N BAĞLANMA DAYANIM DEĞERLERİ̇ ÜZERİ̇NE ETKİ̇Sİ. Current Research in Dental Sciences, Cilt: 32 - Sayı: 1, 38–43. https://ajindex.com/articles/735589

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Cantürk K, Karalar B, Sağsöz Ö, Seven N, Polat Sağsöz N. Farklı üniversal bağlayıcı ajanların CAD/CAM seramiklerin kompozit rezin ile tamiri sonrası bağlanma kuvvetine etkisi. Curr Res Dent Sci. 2019;29(3):381-386
  2. Kawaguchi A, Matsumoto M, Higashi M, et al. Bonding effectiveness of self-adhesive and conventional-type adhesive resin cements to CAD/CAM resin blocks. Part 2: Effect of ultrasonic and acid cleaning. Dent Mater J. 2016;35(1):29-36
  3. Coldea A, Swain MV. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater. 2013;29(4):419-426
  4. Conrad HJ, Seong WJ. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent. 2007;98(5):389-404
  5. Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications. J Dent Res. 2014;93(12):1232-1234
  6. Vichi A, Carrabba M, Paravina R, Ferrari M. Translucency of ceramic materials for CEREC CAD/CAM system. J Esthet Restor Dent. 2014;26(4):224-231
  7. Della Bona A, Nogueira AD, Pecho OE. Optical properties of CAD-CAM ceramic systems. J Dent. 2014;42(9):1202-1209
  8. Coldea A, Swain MV, Thiel N. In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation. J Mech Behav Biomed Mater. 2013;26:34-42
  9. Della Bona A, Corazza PH. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater. 2014;30(5):564-569
  10. Schepke U, Meijer HJ, Vermeulen KM, Raghoebar GM. Clinical Bonding of Resin Nano Ceramic Restorations to Zirconia Abutments: A Case Series within a Randomized Clinical Trial. Clin Implant Dent Relat Res. 2016;18(5):984-992
  11. Bonfante EA, Suzuki M, Lorenzoni FC, et al. Probability of survival of implant-supported metal ceramic and CAD/CAM resin nanoceramic crowns. Dent Mater. 2015;31(8):e168-e177
  12. Higashi M, Matsumoto M, Kawaguchi A, et al. Bonding effectiveness of self-adhesive and conventional-type adhesive resin cements to CAD/CAM resin blocks. Part 1: Effects of sandblasting and silanization. Dent Mater J. 2016;35(1):21-28
  13. Zhang S, Kocjan A, Lehmann F, Kosmac T. Influence of contamination on resin bond strength to nano-structured alumina-coated zirconia ceramic. Eur J Oral Sci. 2010;118(4):396-403
  14. Ishii R, Tsujimoto A, Takamizawa T, et al. Influence of surface treatment of contaminated zirconia on surface free energy and resin cement bonding. Dent Mater J. 2015;34(1):91-97
  15. Yang B, Scharnberg M, Wolfart S, et al. Influence of contamination on bon