SavedAdd your journal

Journals / Artıbilim: Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi Fen Bilimleri Dergisi / 2022 / Cilt: 5 - Sayı: 1

Electrochemical Investigation and DFT Approach: The Inhibition Effect of 2-isopropyl-4-methyl-1,3-thiazole-5-carboxylic acid Against Mild Steel Corrosion

Elektrokimyasal İnceleme ve DFT Yaklaşımı: 2-izopropil-4-metil-1,3-tiyazol-5-karboksilik asidin Yumuşak Çeliğin Korozyonuna Karşı İnhibisyon Etkisi

Mehmet Erman MERT
Başak DOĞRU MERT
Tolga KARAZEHİR
Pages
1–12
Publication Date
2022-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results obtained for the 168 hour immersion time, the resistance values for MS were 9.8 in the absence of 5 mM 2I4MTA5C and 200 ohm.cm-2 in the presence.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the inhibitory properties of 2-isopropyl-4-methyl-1,3-thiazole-5-carboxylic acid (2I4MTA5C) against mild steel corrosion in acidic medium were investigated by electrochemical and quantum theoretical methods.
📊
Key Findings & Data:Electrochemical impedance spectroscopy measurements and polarization curves were obtained in the presence and absence of 5 mM 2I4MTA5C in 0.5 M HCl during 168 hours of immersion, and the adsorption isotherm is presented.
💡
Conclusion & Impact:According to the results obtained for the 168 hour immersion time, the resistance values for MS were 9.8 in the absence of 5 mM 2I4MTA5C and 200 ohm.cm-2 in the presence.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Korozyon · Organik İnhibitör · DFT

Abstract

In this study, the inhibitory properties of 2-isopropyl-4-methyl-1,3-thiazole-5-carboxylic acid (2I4MTA5C) against mild steel corrosion in acidic medium were investigated by electrochemical and quantum theoretical methods. Electrochemical impedance spectroscopy measurements and polarization curves were obtained in the presence and absence of 5 mM 2I4MTA5C in 0.5 M HCl during 168 hours of immersion, and the adsorption isotherm is presented. Experimental results were compared with quantum theoretical parameters in order to establish a relationship between molecular structure and electrochemical behavior and to investigate it in depth. According to the results obtained for the 168 hour immersion time, the resistance values for MS were 9.8 in the absence of 5 mM 2I4MTA5C and 200 ohm.cm-2 in the presence. The calculated corrosion current density values were 2.65 and 0.13 mA.cm-2 for MS in HCl and 5 mM 2I4MTA5C + HCl solution, respectively. The theoretically calculated HOMO and LUMO values were -6.88 eV and -1.80 eV. According to the results obtained, we can say that 2I4MTA5C is a suitable inhibitor candidate with 95.1% protection against mild steel corrosion.

Özet

Bu çalışmada, 2-izopropil-4-metil-1,3-tiyazol-5-karboksilik asidin (2I4MTA5C) asidik ortamda yumuşak çelik korozyonuna karşı inhibitör özellikleri elektrokimyasal ve kuantum teorik yöntemlerle araştırılmıştır. 168 saatlik daldırma sırasında 0,5 M HCl içinde 5 mM 2I4MTA5C varlığında ve yokluğunda elektrokimyasal empedans spektroskopi ölçümleri ve polarizasyon eğrileri elde edildi ve adsorpsiyon izotermi sunuldu. Moleküler yapı ile elektrokimyasal davranış arasında bir ilişki kurmak ve derinlemesine araştırmak için deneysel sonuçlar kuantum teorik parametrelerle karşılaştırıldı. 168 saatlik daldırma süresi için elde edilen sonuçlara göre, MS için direnç değerleri 5 mM 2I4MTA5C yokluğunda 9.8 ve mevcudiyetinde 200 ohm.cm-2 idi. HCl ve 5 mM 2I4MTA5C + HCl solüsyonunda MS için hesaplanan korozyon akımı yoğunluğu değerleri sırasıyla 2.65 ve 0.13 mA.cm-2 idi. Teorik olarak hesaplanan HOMO ve LUMO değerleri -6.88 eV ve -1.80 eV idi. Elde edilen sonuçlara göre 2I4MTA5C'nin yumuşak çelik korozyonuna karşı %95,1 koruma ile uygun bir inhibitör adayı olduğunu söyleyebiliriz

🔖

Cite This Article

MERT, M. E., MERT, B. D., KARAZEHİR, T. (2022). Electrochemical Investigation and DFT Approach: The Inhibition Effect of 2-isopropyl-4-methyl-1,3-thiazole-5-carboxylic acid Against Mild Steel Corrosion. Artıbilim: Adana Alparslan Türkeş Bilim ve Teknoloji Üniversitesi Fen Bilimleri Dergisi, Cilt: 5 - Sayı: 1, 1–12. https://ajindex.com/articles/733040

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Salcı A., Yüksel H., and Solmaz R., (2022). Experimental studies on the corrosion inhibition performance of 2-(2-aminophneyl)benzimidazole for mild steel protection in 1 M HCl solution, Journal of the Taiwan Institute of Chemical Engineers, 134. https://doi.org/10.1016/j.jtice.2022.104349.
  2. Nayak P., Kumari P P., and Rao S. A., (2022). Electrochemical approach to interfacial adsorption and inhibitory performance of (2E)-2- [(IH-Imidazole 2yl) methylidene] Hydrazine1-carbothioamide for corrosion mitigation, Chemical Data Collections, 38. https://doi.org/10.1016/j.cdc.2021.100826.
  3. Alamry K. A., Aslam R., Khan A., Hussein M. A., and Tashkandi N. Y., (2022). Evaluation of corrosion inhibition performance of thiazolidine-2,4-diones and its amino derivative: Gravimetric, electrochemical, spectroscopic, and surface morphological studies, Process Saf Environ Prot, 159, 178-197. https://doi.org/10.1016/j.psep.2021.12.061.
  4. Ongun Yüce A., Doğru Mert B., Kardaş G., and Yazıcı B., (2014). Electrochemical and quantum chemical studies of 2-amino-4-methyl-thiazole as corrosion inhibitor for mild steel in HCl solution, Corros Sci, 83, 310-316. https://doi.org/10.1016/j.corsci.2014.02.029.
  5. Abd El-Lateef H. M., Sayed A. R., and Shalabi K., (2022). Studying the effect of two isomer forms thiazole and thiadiazine on the inhibition of acidic chloride-induced steel corrosion: Empirical and Computer simulation explorations, Journal of Molecular Liquids, 356. https://doi.org/10.1016/j.molliq.2022.119044.
  6. Hou Y., Zhu L., He K., Yang Z., Ma S., and Lei J., (2022). Synthesis of three imidazole derivatives and corrosion inhibition performance for copper, Journal of Molecular Liquids, 348. https://doi.org/10.1016/j.molliq.2021.118432.
  7. Gong W., Xu B., Yin X., Liu Y., Chen Y., and Yang W., (2019). Halogen-substituted thiazole derivatives as corrosion inhibitors for mild steel in 0.5 M sulfuric acid at high temperature, Journal of the Taiwan Institute of Chemical Engineers, 97, 466-479. https://doi.org/10.1016/j.jtice.2019.02.018.
  8. Farahati R., Ghaffarinejad A., Mousavi-Khoshdel S. M., Rezania J., Behzadi H., and Shockravi A., (2019). Synthesis and potential applications of some thiazoles as corrosion inhibitor of copper in 1 M HCl: Experimental and theoretical studies, Progress in Organic Coatings, 132, 417-428. https://doi.org/10.1016/j.porgcoat.2019.04.005.
  9. Abd El-Fattah M., Abd El-Wahab H., Bashandy M. S., El-Eisawy R. A., Abd El-hai F., and Saeed M., (2017). Potential application of so