SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi / 2019 / Cilt: 2 - Sayı: 1

The Relationship of Thermal and Elastic Properties with Ultrasonic Wave Velocity of WC/Co-Ti Composites

Vildan ÖZKAN BİLİCİ
İsmail Hakkı SARPÜN
Mehmet Selami KILIÇKAYA
Pages
20–28
Publication Date
2019-06-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The relation between the Young modulus' values with ultrasonic wave velocity, which is obtained through two different methods and thermal conductivity has been physically examined and the results have been compared with the literature.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it is aimed to produce various composites and reveal their physical properties.
📊
Key Findings & Data:The study was performed on various specimens with different WCx content at the range from 60 to 80% and Co/Ti content in 3:1, 1:1 and 1:3 groups.
💡
Conclusion & Impact:The relation between the Young modulus' values with ultrasonic wave velocity, which is obtained through two different methods and thermal conductivity has been physically examined and the results have been compared with the literature.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Composite · Young Modulus · Pulse-Echo

Özet

In this study, it is aimed to produce various composites and reveal their physical properties. Tungsten carbide (WC) powder and the two of cobalt (Co) and titanium (Ti) powders as binder phase have been used for the preparation of WC-Co-Ti ceramic-metal composite with powder metallurgy. Two different ultrasonic non-destructive techniques were employed to measure the mechanical wave velocity in WC-Co-Ti composites. The study was performed on various specimens with different WCx content at the range from 60 to 80% and Co/Ti content in 3:1, 1:1 and 1:3 groups. The WCx content in examined materials was determined using the standard destructive analysis. The Young modulus (E) of the produced composites and the ultrasonic velocity measured through ultrasonic pulse-echo method and immersion method. Thermal conductivity of samples has been measured via hot disk method. The relation between the Young modulus' values with ultrasonic wave velocity, which is obtained through two different methods and thermal conductivity has been physically examined and the results have been compared with the literature.

🔖

Cite This Article

BİLİCİ, V. Ö., SARPÜN, İ. H., KILIÇKAYA, M. S. (2019). The Relationship of Thermal and Elastic Properties with Ultrasonic Wave Velocity of WC/Co-Ti Composites. Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi, Cilt: 2 - Sayı: 1, 20–28. https://ajindex.com/articles/729441

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Ashraf A. A. “Measurement of thermal conductivity and diffusivity of different materials by the transient plane source method using hot disk thermal constants analyzer” (2014), pp. 1–7.
  2. Bouda A. B., Halimi R., Benchaalaa A. and Lebaili S. Ultrasonic NDE of materials grain size and hardness. WCU, Paris, (2003).
  3. Castellano A., Foti P., Fraddosio A., Marzano S. and Piccioni M.D., “Mechanical Characterization of CFRP Composites by Ultrasonic Immersion Tests: Experimental and Numerical Approaches”, Composites Part B: Engineering, Vol. 66 (2014), pp. 299-310.
  4. Castellano A., Foti P., Fraddosio A., Marzano S. and Piccioni M.D., The ultrasonic C-Scan technique for damage evaluation of GFRP composite materials, International Journal of Mechanics, Vol. 10, (2016), pp. 206-212.
  5. Ekroth M., Frykholm R., Lindholm M., Andrén H. O. and Ågren J. “Gradient zones in WC–Ti(C,N)–Co-based cemented carbides: experimental study and computer simulations”, Acta Materialia, 48, (2000), p. 2177 – 2185. Fernandes C. M., Senos A. M. R., Vieira M. T., Antunes J. M.” Mechanical characterization of composites prepared from WC powders coated with Ni rich binders”, International Journal of Refractory Metals and Hard Materials, 26, (2008), p. 491. Fernandes C. M., Senos A. M. R., “Cemented carbide phase diagrams: A review”, International Journal of Refractory Metals and Hard Materials, 29, (2011), p. 405 – 418. Gaoa Y., Luoa B. H., Heb K. J., Zhanga W. W. and Baia Z. H. “Effect of Fe/Ni ratio on the microstructure and properties of WC-Fe-Ni-Co cemented carbides”, Ceramics International, 44, (2018), p. 2030 – 2041.
  6. Genga R. M., Cornish L. A. and Akdoğan G., “Effect of Mo2C additions on the properties of SPS manufactured WC–TiC–Ni cemented carbides”, International Journal of Refractory Metals and Hard Materials, 41, (2013), p. 12-21.
  7. Guo Z., Xiong J., Yang M., Song X. and Jiang C. “Effect of Mo2C on the microstructure and properties of WC–TiC–Ni cemented carbide” International Journal of Refractory Metals and Hard Materials, 26, (2008), p. 601-605. Gu D. D. and Shen Y. F., “Influence of reinforcement weight fraction on microstructure and properties of submicron WC-Co-p/Cu bulk MMCs prepared by direct laser sintering”, Journal of Alloys and Compounds, 431, (2007), p. 112 – 120.Hong S., Wu Y. P., Zhang J. F., Zheng Y. G., Zheng Y. and Lin J. R., “Synergistic effect of ultrasonic cavitation erosion and corrosion of WC-CoCr and FeCrSiBMn coatings prepared by HVOF spraying”, Ultrasonics Sonochemistr