Journals / Acta Materialia Turcica / 2021 / Cilt: 5 - Sayı: 1

TOPOGRAPHICAL STUDY OF TEXTURED CUTTING TOOLS BY JETTING AND LASER BLASTING TECHNIQUES

Pages
1–10
Publication Date
2021-09-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Therefore, the topographies of the textured tools were studied by jetting and laser blasting techniques and later assessed with a 3D profilometer, resulting in greater isotropy for textured substrates with the jetting technology as opposed to laser machining.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the last two decades, micro-topography surface modification has received great attention, as a result of its evenly distributed asperities and depressions.
📊
Key Findings & Data:The process, known as surface texturization, has been successfully used in many applications with the aim to increasing surface performance in various aspects.
💡
Conclusion & Impact:Therefore, the topographies of the textured tools were studied by jetting and laser blasting techniques and later assessed with a 3D profilometer, resulting in greater isotropy for textured substrates with the jetting technology as opposed to laser machining.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Topography · texturization · jetting

Abstract

In the last two decades, micro-topography surface modification has received great attention, as a result of its evenly distributed asperities and depressions. The process, known as surface texturization, has been successfully used in many applications with the aim to increasing surface performance in various aspects. The purpose of this work is to compare laser texturization in ISO K-class hardness metal inserts that were coated with TiAlN-Futura®, AlCrN-Alcrona® and AlCrN-Hélica®, as well as to validate its efficiency on the mechanical coating of substrates in comparison to the commercially available by the jetting technique. Therefore, the topographies of the textured tools were studied by jetting and laser blasting techniques and later assessed with a 3D profilometer, resulting in greater isotropy for textured substrates with the jetting technology as opposed to laser machining.

🔖

Cite This Article

SALES, W., VİANA, R., SOUZA, J., VAUGHAN, L., CANGUE, F. (2021). TOPOGRAPHICAL STUDY OF TEXTURED CUTTING TOOLS BY JETTING AND LASER BLASTING TECHNIQUES. Acta Materialia Turcica, Cilt: 5 - Sayı: 1, 1–10. https://ajindex.com/articles/727614

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Godoy, C., Ávila, R. F., Marinho, F. C., Lima, M. M., Abrão, A. M., Paula e Silva, E. M. 2003, Análise Topográfica por Perfilometria do Desgaste de Cratera em Ferramenta de Metal Duro Revestida com TiN, Escola de Engenharia da Universidade Federal de Minas Gerais, Brasil., Matéria, Vol 8, Nº 2, pp. 145–154 (2003
  2. Mummery, L., Surface Texture Analysis: The Handbook, Hommelwerke GmbH, pp.106 (1992
  3. Francis, E. H. T., Sumit K.S., Mannan, M.A, Topography of the Flank Wear Surface, Journal of Materials Processing Technology, v. 5540, pp. 1–6 (2001
  4. ANSI/ASME, Norma B46.1, Surface Texture, Surface Roughness, Waviness and Lay, American Society of Mechanical Engineers, 110 (2002
  5. Costa, H. L., Modification of Surface Topography: Manufacturing Methods and Applications, Doctoral Thesis, University of Cambridge, Cambridge, England, 321 (2005
  6. Tönshoff, H. K., Seegers, H., Influence of Residual Stress Gradients on the Adhesion Strength of Sputtered Hard Coatings, Thin Solid Films, vol. 377-378, pp. 340–345 (2000
  7. Bouzakis, K. D., Michailidis, N., Hadjiyiannis, S., Efstathiou, K., Pavlidou, E., Erkens, G., Rambadt, S., Wirth, I., Improvement of PVD Coated Inserts Cutting Performance, Through Appropriate Mechanical Treatments of Substrate and Coating Surface, Surface and Coatings Technology, vol. 146-147, pp. 443-450 (2001
  8. Tiejun, L., Qihong, L., Jingxing, D., Yunrong, W., Jingru, L., Modified Surface Morphology in Surface Ablation of Cobalt-Cemented Tungsten Carbide with Pulsed-UV Laser Radiation, Applied Surface Science, vol. 172, pp. 331–344 (2001
  9. Lima, M. S. F., Folio, F., Mischler, S., Microstructure and Surface Properties of Laser-Remelted Titanium Nitride Coatings on Titanium, Surface and Coatings Technology, vol. 199, pp. 83– 91 (2005
  10. Polini, R., D’Antonio, P., Lo Casto, S., Ruisi, V. F., Traversa, E., Cutting Performance and Indentation Behaviour of Diamond Films on Co-Cemented Tungsten Carbide, Surface and Coatings Technology, vol. 123, pp. 78–83 (2000
  11. Arroyo, J. M., Investigação sobre o Uso da Texturização a Laser na Preparação da Superfície a Ser Recoberta em Ferramentas de Metal Duro para Fresamento, Tese de Doutorado, Universidade Estadual de Campinas, 166 (2009
  12. Dumitru, G., Lüscher, B., Krack, M., Bruneau, S., Hermann, J., Gerbig, Y., Laser Processing of Hardmetals: Physical Basics and Applications, International Journal of Refractory Metals & Hard Materials, vol. 23, pp. 278–286 (2005
  13. Griffith