Journals / Turkish Journal of Engineering and Environmental Sciences / 2001 / Cilt: 25 - Sayı: 5

Design, Manufacture and Investigation of Cracking Efficiency of a Stone Cracking Machine with Periodic Loading and Sloping Jaw

Pages
555–560
Publication Date
2001-05-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results obtained at the end of this study were compared with a similar type of stone cracking machine.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a stone cracking machine with periodic loading, and a shaky and sloping jaw which breaks apricot and almond stones was designed and manufactured.
📊
Key Findings & Data:For determining the cracking efficiency of the stone cracking machine, the apricot stones were cracked under dry and different wetting periods (1, 2, 3 and 4 hours) and jaw clearances (8.5, 9.5, 10.5 and 11.5 mm).
💡
Conclusion & Impact:The results obtained at the end of this study were compared with a similar type of stone cracking machine.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Stone cracking machine · Apricot and Almond. · Stone cracking machine

Abstract

In this study, a stone cracking machine with periodic loading, and a shaky and sloping jaw which breaks apricot and almond stones was designed and manufactured. For determining the cracking efficiency of the stone cracking machine, the apricot stones were cracked under dry and different wetting periods (1, 2, 3 and 4 hours) and jaw clearances (8.5, 9.5, 10.5 and 11.5 mm). The results obtained at the end of this study were compared with a similar type of stone cracking machine.

Özet

In this study, a stone cracking machine with periodic loading, and a shaky and sloping jaw which breaks apricot and almond stones was designed and manufactured. For determining the cracking efficiency of the stone cracking machine, the apricot stones were cracked under dry and different wetting periods (1, 2, 3 and 4 hours) and jaw clearances (8.5, 9.5, 10.5 and 11.5 mm). The results obtained at the end of this study were compared with a similar type of stone cracking machine.

🔖

Cite This Article

TOSUN, N., ÖZLER, L. (2001). Design, Manufacture and Investigation of Cracking Efficiency of a Stone Cracking Machine with Periodic Loading and Sloping Jaw. Turkish Journal of Engineering and Environmental Sciences, Cilt: 25 - Sayı: 5, 555–560. https://ajindex.com/articles/723020

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...