Journals / Çukurova Üniversitesi Mühendislik Fakültesi dergisi / 2016 / Cilt: 31 - Sayı: ÖS2

Experimental Investigation of Scour Hole Geometry around Circular Bridge Piers

Dairesel Köprü Ayakları Etrafındaki Oyulma Çukuru Geometrisinin Deneysel Araştırılması

Pages
73–78
Publication Date
2016-10-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The experiments were performed under steady state flow conditions, with four different constant discharges.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Failure of the bridges due to local scour around their piers can cause serious life losses and property damages and create significant environmental problems.
📊
Key Findings & Data:The experiments were carried out in a rectangular flume 80 cm wide, 18.6 m long and 75 cm high by using uniform sediment with a median diameter of 3.47 mm and geometric standard deviation of 1.39.
💡
Conclusion & Impact:The experiments were performed under steady state flow conditions, with four different constant discharges.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Köprü ayağı · Temiz-su oyulması · Bridge pier

Abstract

Failure of the bridges due to local scour around their piers can cause serious life losses and property damages and create significant environmental problems. In this experimental study, scour hole geometry around circular bridge piers were investigated. The experiments were carried out in a rectangular flume 80 cm wide, 18.6 m long and 75 cm high by using uniform sediment with a median diameter of 3.47 mm and geometric standard deviation of 1.39. The experiments were performed under steady state flow conditions, with four different constant discharges.

Özet

Köprü ayakları etrafındaki yerel oyulmalara bağlı oluşan sorunlar, köprülerin zarar görmesine ve buna bağlı ciddi çevresel etkilere sebep olmakta ve hatta can kayıpları yaşanabilmektedir. Sunulan bu deneysel çalışmada dairsel köprü ayakları etrafında oluşan oyulma çukuru geometrisi incelenmiştir. Deneyler, 80 cm genişlikli, 18,6 m uzunluklu ve 75 cm yükseklikli dikdörtgen kesitli bir kanalda, dane medyan çapı 3,47 mm ve geometrik standart sapması 1,39 olan üniform taban malzemesi ile gerçekleştirilmiştir. Dört farklı debi değeri ile kararlı akım şartlarında deneyler tamamlanmıştır.

🔖

Cite This Article

AKSOY, A. Ö., DOĞAN, M. (2016). Experimental Investigation of Scour Hole Geometry around Circular Bridge Piers. Çukurova Üniversitesi Mühendislik Fakültesi dergisi, Cilt: 31 - Sayı: ÖS2, 73–78. https://ajindex.com/articles/715422

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Landers, M.N., 1992. Bridge Scour Data Management, In: ASCE, Hydraulic Engineering: Saving a Threatened Resource-in Search of Solutions, Proceedings, Hydraulic Engineering Sessions at Water Forum '92, 2-6 August, Baltimore, Maryland
  2. Laursen, E.M., 1958. Scour at Bridge Crossings, Bull. No.8, Iowa Hwy. Res. Board, Ames, Iowa
  3. Breusers, H.N.C., Nicollet, G., Shen, H.W., 1977. Local Scour Around Cylindrical Piers, Journal of Hydraulic Resources, 15(3): 211-252
  4. Gunyaktı, A., 1988. Köprü Ayakları Etrafında Oyulma Derinliğinin Grafik Yöntemle Tayini, Mühendislik ve Çevre Bilimleri Dergisi, TÜBİTAK, 12(1): 96-108
  5. Yanmaz, A.M., 1989. Time Dependent Analysis of Clear Water Scour Around Bridge Piers, Thesis Presented to Middle East Technical Univ., Ankara, Turkey, in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy
  6. Melville, B.W., 1997. Pier and Abutment Scour: Integrated Approach, Journal of Hydraulic Engineering, 123(2): 125-136
  7. Richardson, E.V., Davis, S.R., 2001. Evaluating Scour at Bridges-Fourth Edition, Hydraulic Engineering Circular No.18, Federal Highway Administration Publication No. FHWA-NHI 01-001, Washington, DC, p. 376
  8. Oliveto, G., Hager, W.H., 2002. Temporal Evolution of Clear-water Pier and Abutment Scour, Journal of Hydraulic Engineering, 128(9): 811–820
  9. Mia, F., Nago, H., 2003. Design Method of Time-Dependent Local Scour at Circular Bridge Pier, Journal of Hydraulic Engineering, 129 (6): 420-427
  10. Chang, W.Y., Lai J.S., Yen, C.L., 2004. Evolution of Scour Depth at Circular Bridge Piers, Journal of Hydraulic Engineering, 130(9): 905-913
  11. Sheppard, D.M., Odeh, M., Glasser, T., 2004. Large Scale Clearwater Local Pier Scour Experiments, Journal of Hydraulic Engineering, 130(10): 957-963
  12. Kothyari U.C., Hager, W.H., Oliveto, G., 2007. Generalized Approach for Clear-water Scour at Bridge Foundation Elements, Journal of Hydraulic Engineering, 133(11): 1229-1240
  13. Sheppard, D.M., Demir, H., Melville, B., 2011. Scour at Wide Piers and Long Skewed Piers, National Cooperative Highway Research Program Rep. 682, Transportation Research Board, Washington, DC
  14. Melville, B.W., Sutherland, A.J., 1988. Design Method for Local Scour at Bridge Piers, Journal of Hydraulic Engineering, 114(10): 1210–1226.