Journals / Türk Tarım ve Doğa Bilimleri Dergisi / 2022 / Cilt: 9 - Sayı: 4

Investigation of Physical and Mechanical Properties of Medium Density Fibreboards (MDF) Produced from Iron Tree (Casuarina equisetifolia L.) Wood

Demir Ağacı (Casuarina equisetifolia L.) Odunundan Üretilen Orta Yoğunlukta Lif Levhaların (MDF) Fiziksel ve Mekanik Özelliklerinin Araştırılması

Pages
892–899
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to results, except for IB, both physical and mechanical properties of the boards produced using ironwood (Casuarina equisetifolia L.) were higher than the TS EN standard.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, ironwood (Casuarina equisetifolia L.) raw material was used. 1.17 moles of urea-formaldehyde (UF) resin (12.5%), solid paraffin (1.5%) and 10% ammonium chloride solution were added to the fibers.
📊
Key Findings & Data:Boards with a density of 0.694 g/cm³ were produced in the MDF production line.
💡
Conclusion & Impact:According to results, except for IB, both physical and mechanical properties of the boards produced using ironwood (Casuarina equisetifolia L.) were higher than the TS EN standard.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Demir ağacı · Casuarina equisetifolia L. · MDF

Abstract

In this study, ironwood (Casuarina equisetifolia L.) raw material was used. 1.17 moles of urea-formaldehyde (UF) resin (12.5%), solid paraffin (1.5%) and 10% ammonium chloride solution were added to the fibers. Boards with a density of 0.694 g/cm³ were produced in the MDF production line. The physical and mechanical properties of the boards were evaluated. Swelling in thickness for 2 and 24 h were 2.53% and 6.01%, respectively. Modulus of rupture, modulus of elasticity, and internal bonding strenght were 35.2 N/mm2, 2982.8 MPa, and 0.42 MPa, respecitvely. Average moisture content of the boards was 7.9%. According to results, except for IB, both physical and mechanical properties of the boards produced using ironwood (Casuarina equisetifolia L.) were higher than the TS EN standard.

Özet

Bu çalışmada, Demir ağacı (Casuarina equisetifolia L.) odunu kullanılarak, kuru life oranla 1.17 mol üre formaldehit (ÜF) reçinesi (%12.5), katı parafin (%1.5) ve %10’luk amonyum klorür solüsyonu (%1,30) eklenerek MDF üretim hattında 0.694 g/cm³ yoğunlukta levhalar üretilmiştir. Bu levhaların fiziksel ve mekanik özellikleri incelenmiştir. Fiziksel özelliklerden levhaların yoğunluğu 0.694 g/cm³, kalınlığına şişme değerleri 2 ve 24 saat için sırası ile %2.53 ve %6.01 olarak ölçülmüştür. Mekanik özelliklerden eğilme mukavemeti 35.20 MPa, elastikiyet modülü 2982.8 MPa ve çekme mukavemeti 0.42 MPa ölçülmüştür. Bu çalışmadan elde edilen verilere göre, Demir ağacından (Casuarina equisetifolia L.) üretilen MDF levhaların fiziksel ve mekanik özellikleri çekme mukavemeti hariç TS EN standardının üzerinde ölçülmüştür.

🔖

Cite This Article

ÇAMLIBEL, O., AYDIN, M. (2022). Investigation of Physical and Mechanical Properties of Medium Density Fibreboards (MDF) Produced from Iron Tree (Casuarina equisetifolia L.) Wood. Türk Tarım ve Doğa Bilimleri Dergisi, Cilt: 9 - Sayı: 4, 892–899. https://ajindex.com/articles/706288

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Akbulut,T., and Koç, E. 2006. The effect of the wood species on the roughness of the surface and profiled areas of medium density fiberboard. Wood Res, 51:77–86.
  2. Akgül, M., and Çamlibel, O. 2008. Manufacture of medium density fiberboard (MDF) panels from rhododendron (R. ponticum L.) biomass. Build. Environ., 43(2008):438-443
  3. Akgül, M., Çöpür, Y., Güler, C., Tozluoǧlu, A., Büyüksari, Ü., 2007. Medium density fiberboard from Quercus robur. J Appl Sci,7:1085–7. ttps://doi.org/10.3923/jas.2007.1085.1087 Akgül, M., Korkut, S., Çamlibel, O., Candan, Z., Akbulut, T., 2012. Wettability and surface roughness characteristics of medium density fiberboard panels from rhododendron (Rhododendron Ponticum) biomass. Maderas Cienc y Tecnol,14:185–93. https://doi.org/10.4067/S0718-221X2012000200006
  4. Akgül, M., Uner, B., Çamlibel, O., Ayata, Ü. 2017. Manufacture of medium density fiberboard (MDF) panels from agribased lignocellulosic biomass. Wood Res, 62:615–24.
  5. Akgül, M., Ayrilmis, N., Çamlıbel, O., Korkut, S. 2013. Potential utilization of burned wood in manufacture of medium density fiberboard. J Mater Cycles Waste Manag,15:195–201. https://doi.org/10.1007/s10163-012-0108-3. Anonim. 2022.
  6. Demir ağacı, Doğu Akdeniz Ormancılık Araştırma Enstitüsü Müdürüğü, DEMİR AĞACI.pdf (ogm.gov.tr) Ayrılmıs, N. 2000. The effect of tree species on technological properties of MDF. MSc thesis, İstanbul University, İstanbul,
  7. Turkey. Camlibel, O., and Akgul, M. 2020. Mechanical and physical properties of medium density fibreboard with calcite additive. Wood Res, 65:231–44. https://doi.org/10.37763/wr.1336-4561/65.2.231244.
  8. Camlibel, O. 2020. Mechanical and formaldehyde-related properties of medium density fiberboard with zeolite additive. BioResources, 15:7918–32. https://doi.org/10.15376/biores.15.4.7918-7932.
  9. Chowdhury, Q., Rashid, A.Z.M., Newaz, S., Alam, M. 2007. Effects of Height on Physical Properties of Wood of Jhau (Casuarina equisetifolia L). Australian Forestry, 70(1):33-36. http://dx.doi.org/10.1080/00049158.2007.10676260
  10. Chowdhury, Q., Ishiguri, F., Iizuka K., Takashima, Y., Matsumoto, K., Hiraiwa, T., Ishido, M., Sanpe, H., Yokota, S., Yoshizawa, N. 2009. Radial variations of wood properties in Casuarina equisetifolia growing in Bangladesh. J Wood Sci, 55:139-143. https://doi.org/10.1007/s10086-008-1004-2
  11. Coşkun Hepcan, Ç., and Cangüzel, A. 2021. Bornova üniversite caddesi yol ağaçlarının hava kalitesi üzerine etkisi. Ege Univiversitesi Ziraat Fakültesi Dergisi, 58: 245–252. Hu