Journals / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 2

Urban Arterial Travel Time Evaluation using Bluetooth Data

Bluetooth Verisi Kullanarak Kentsel Arterlerde Seyahat Süresinin Değerlendirilmesi

Pages
767–773
Publication Date
2022-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results indicated that the data had considerable success in estimating travel times and urban traffic monitoring with adequate sampling rates.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Reliable estimation of speed or travel time (TT) of an urban arterial is the fundamental task for better management of the traffic.
📊
Key Findings & Data:Recently, Bluetooth (BT) technology has been widely used as a traffic data source due to the i) low installation cost, and ii) providing continuous data even 24-h period.
💡
Conclusion & Impact:The results indicated that the data had considerable success in estimating travel times and urban traffic monitoring with adequate sampling rates.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Bluetooth teknolojisi · seyahat süresi tahmini · seyahat süresi dağılımı

Abstract

Reliable estimation of speed or travel time (TT) of an urban arterial is the fundamental task for better management of the traffic. Traditionally, such data are collected via loop detectors, inductive loops, video cameras, but their installation cost were not always allowed to locate every specific point. Recently, Bluetooth (BT) technology has been widely used as a traffic data source due to the i) low installation cost, and ii) providing continuous data even 24-h period. The principle of BT-based traffic data is simply capturing the timestamped of the unique Media Access Control (MAC) of Bluetooth devices. Detecting the same MAC addresses from multiple different locations enabled to estimate the Origin and Destination (O-D) of the trips and travel time information. This study evaluates the distribution of TT information from different perspectives in which BT-based traffic data were obtained from five consecutive signalized intersections located in Mersin, Turkey during morning peak hours of 07:30-09:30 for the two weekdays. The results indicated that the data had considerable success in estimating travel times and urban traffic monitoring with adequate sampling rates. However, the filtering process must be carefully handled to distinguish the motorized movements from non-motorized ones.

Özet

Bir kentsel arterde hızın veya seyahat süresinin güvenilir bir şekilde tahmin edilmesi, trafiğin daha iyi yönetilmesi için gereklidir. Geleneksel olarak, bu tür veriler döngü detektörleri, endüktif döngüler, video kameralar aracılığıyla toplanır. Fakat kurulum maliyetlerinin yüksek olması nedeniyle bu cihazları trafikteki her bir noktaya yerleştirmek mümkün değildir. Son zamanlarda, Bluetooth (BT) teknolojisi, i) düşük kurulum maliyeti ve ii) 24 saatlik periyotta bile sürekli veri sağlama avantajı nedeniyle bir trafik veri kaynağı olarak yaygın bir şekilde kullanılmaktadır. BT tabanlı trafik verileri, Bluetooth cihazlarının tekil Ortam Erişim Kontrollerinin (MAC) zaman bazlı olarak kaydedilmesi prensibine dayanır. Birden fazla farklı konumda aynı MAC adreslerinin algılanması, yolculukların Başlangıç ve Varış noktalarının yanı sıra seyahat süresi bilgilerinin de tahmin edilmesini sağlar. Bu çalışmada, Mersin ilinde bulunan ana sinyalize kentsel arterlerden elde edilen BT verileri kullanarak hesaplanan seyahat sürelerinin dağılımı incelenmiştir. Veriler, hafta içi iki gün 07:30-09:30 (sabah zirve saatleri) arasındaki ana arterler üzerindeki 5 ardışık sinyalize kavşaktan toplanmıştır. Sonuç olarak, yeterli örneklem düzeyi sağlandığı için, veriler seyahat sürelerini tahmininde ve kentsel trafiğin izlenmesinde başarılı olmuştur. Bununla birlikte, motorlu hareketleri motorsuz olanlardan ayırmak için filtreleme işlemi dikkatlice yapılması gerektiği sonucuna varılmıştır.

🔖

Cite This Article

ALTINTAŞI, O., BALCI, M. E., ÖZEN, M. (2022). Urban Arterial Travel Time Evaluation using Bluetooth Data. Politeknik Dergisi, Cilt: 25 - Sayı: 2, 767–773. https://ajindex.com/articles/697059

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Altintasi, O., Tuydes-Yaman, H., Tuncay, K., “Quality of floating car data (FCD) as a surrogate measure for urban arterial speed”,Canadian Journal of Civil Engineering, 46(12): 1187-1198, (2019)
  2. Yucel, S., Tuydes-Yaman, H., Altintasi, O., Ozen, M., “Determination of vehicular travel patterns in an urban location using Bluetooth technology”, ITS America Annual Meeting and Expo, Nashville, 1-11, (2013)
  3. Díaz, J. J. V., González, A. B. R., Wilby, M. R., “Bluetooth traffic monitoring systems for travel time estimation on freeways”, IEEE Transactions on Intelligent Transportation Systems, 17(1): 123-132, (2015)
  4. Araghi, B. N., Hammershøj Olesen, J., Krishnan, R., Tørholm Christensen, L., & Lahrmann, H., “Reliability of bluetooth technology for travel time estimation”, Journal of Intelligent Transportation Systems, 19(3): 240-255, (2015)
  5. Haghani, A., Hamedi, M., Sadabadi, K. F., Young, S., Tarnoff, P., “Data collection of freeway travel time ground truth with bluetooth sensors”, Transportation Research Record, 2160(1): 60-68, (2010)
  6. Martchouk, M., Mannering, F., Bullock, D., “Analysis of Freeway Travel Time Variability Using Bluetooth Detection”, Journal of Transportation Engineering, 137(10): 697–704, (2011)
  7. Liu, Y., Xia, J. C., & Phatak, A., “Evaluating the Accuracy of Bluetooth-Based Travel Time on Arterial Roads: A Case Study of Perth, Western Australia”, Journal of Advanced Transportation, (2020)
  8. Tufuor, E.O.A, and Laurence R. R., “Validation of the Highway Capacity Manual urban street travel time reliability methodology using empirical data”, Transportation Research Record, 2673(4): 415-426, (2019)
  9. Saeedi, A., Park, S., Kim, D. S., Porter, J. D., “Improving accuracy and precision of travel time samples collected at signalized arterial roads with bluetooth sensors”, Transportation Research Record, 2380(1): 90-98, (2013)
  10. Tsubota, T., Bhaskar, A., Chung, E., Billot R., “Arterial Traffic Congestion Analysis Using Bluetooth Duration Data”. Proc., Australasian Transport Research Forum, Adelaide, Australia, 1-14, (2011)
  11. Transportation Research Board, “Highway Capacity Manual”, National Research Council, Washington D.C., (2010)
  12. Yang, S., Wu, Y. J., “Travel mode identification using Bluetooth technology”, Journal of Intelligent Transportation Systems, 22(5): 407-421, (2018)
  13. Laharotte, P. A., Billot, R., Come, E., Oukhellou, L., Nantes, A., El Faouzi, N. E., “Spatiotemporal analysis of Bluetooth data: