Journals / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 2

Curve Fitting Initial Guess for Iterative Differential Quadrature Solution of Burgers Equation

Bugers Denkleminin İterarif Diferansiyel Quadrature Çözümü için Eğri Uydurmalı Başlangıç Tahmini

Pages
699–709
Publication Date
2022-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The consequence of comparisons shows that more accurate results and faster solution than other studies could be obtained by using I-DQM with curve fitting initial guess.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:According to presented numerical studies in the literature, the solution of Burgers Equation (BE) performed for dt=0.001 and dt=0.0001 commonly.
📊
Key Findings & Data:In this study, numerical solution of BE carried out by using the Iterative Differential Quadrature Method (I-DQM), as dt=0.01.
💡
Conclusion & Impact:The consequence of comparisons shows that more accurate results and faster solution than other studies could be obtained by using I-DQM with curve fitting initial guess.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Burgers denklemi · iteratif diferansiyel quadrature metodu · başlangıç tahmini

Abstract

According to presented numerical studies in the literature, the solution of Burgers Equation (BE) performed for dt=0.001 and dt=0.0001 commonly. In this study, numerical solution of BE carried out by using the Iterative Differential Quadrature Method (I-DQM), as dt=0.01. Convergence speed and accuracy of iterative methods depends on the initial guess. Every Partial Differential Equation (PDE) describes one or more than one physical problems from the perspective of the engineering view. Unlike the previous iterative studies, in this work, an initial guess value is used in accordance with the physical nature of the discussed problem by using curve fitting. Absolute error analysis of obtained results performed for comparison with some previous studies. The consequence of comparisons shows that more accurate results and faster solution than other studies could be obtained by using I-DQM with curve fitting initial guess.

Özet

Literatürde sunulan sayısal çalışmalara göre, Burgers Denkleminin (BE) çözümü yaygın olarak dt = 0.001 ve dt = 0.0001 için yapılmıştır. Bu çalışmada BE'nin sayısal çözümü, İteratif Diferansiyel Quadrature Yöntemi (I-DQM) kullanılarak dt = 0.01 olarak gerçekleştirilmiştir. İteratif yöntemlerin yakınsama hızı ve doğruluğu başlangıç tahmini değerine bağlıdır. Her Kısmi Diferansiyel Denklem (PDE), mühendislik bakış açısından bir veya daha fazla fiziksel problemi tanımlar. Önceki iteratif çalışmalardan farklı olarak, bu çalışmada, eğri uydurma kullanılarak tartışılan problemin fiziksel doğasına uygun bir başlangıç tahmini değeri kullanılmıştır. Elde edilen sonuçların mutlak hata analizi, önceki bazı çalışmalarla karşılaştırılmak üzere yapılmıştır. Karşılaştırmaların sonucu, eğri uydurmalı başlangıç tahmini ile I-DQM kullanılarak diğer çalışmalardan daha doğru sonuçların ve daha hızlı çözümün elde edilebileceğini göstermektedir.

🔖

Cite This Article

GİRGİN, Z., AYSAL, F. E., BAYRAKÇEKEN, H. (2022). Curve Fitting Initial Guess for Iterative Differential Quadrature Solution of Burgers Equation. Politeknik Dergisi, Cilt: 25 - Sayı: 2, 699–709. https://ajindex.com/articles/697052

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Bateman H., “Some Recent Researches on The Motion of Fluids”, Monthly Weather Review, 40: 163-170 (1915)
  2. Burgers J. M., “Mathematical examples illustrating relations occurring in the theory of turbulent fluid motion”, Trans. Roy. Neth. Acad. Sci., 17 (2): 1-5 (1939)
  3. Burgers J. M., “A Mathematical Model Illustrating the Theory of Turbulence”, Advances in Applied Mechanics, 1: 171-199 (1948)
  4. Hopf E., “The partial differential equation ut + uux = μxx”, Pure and Applied Mathematics, 3(3): 201-230 (1950)
  5. Cole J. D., “On a quasi-linear parabolic equation occurring in aerodynamics”, Quart. Appl. Math., 9: 225-236 (1951)
  6. Caldwell J. and Smith P., “Solution of Burgers' equation with a large Reynolds number”, Appl. Math. Model. 6: 381-385 (1982)
  7. Evans D. J. and Abdullah A. R., “The group explicit method for the solution of Burgers' equation”, Quart. Appl. Math., 30: 239-253 (1984)
  8. Mittal R. C. and Signnal P., “Numerical solution of Burgers' equation”, Commun. Numer. Methods Eng, 9: 397-406 (1993)
  9. Öziş T. and Özdeş A., “A direct variational methods applied to Burgers' equation”, J. Comput. Appl. Math, 71: 163-175 (1996)
  10. Kutluay S. A., Bahadir A. R. and Özdeş A., “Numerical solution of one-dimensional Burgers equation: explicit and exact-explicit finite difference methods”, J. Comput. Appl. Math, 103: 251-261 (1999)
  11. Kutluay S. A. and Esen A., “A linearized numerical scheme for Burgers-like equations”, Appl. Math. Comput, 156: 295-305 (2004)
  12. Liao W., “An implicit fourth-order compact finite difference scheme for one-dimensional Bugers equation”, Appl. Math. Comput, 206: 755-764 (2008)
  13. Öziş T. and Erdoğan U., “An exponentially fitted method for solving Bugers equation”, Int. J. Numer. Meth. Engng. 79: 696-705 (2009)
  14. Gao Q. and Zou M.Y., “An analytical solution for two and three dimensional nonlinear Burgers’ equation”, Applied Mathematical Modelling. 45: 255–270 (2017)
  15. Mittal R. and Jiwari R., “A differential quadrature method for numerical solutions of Burgers'‐type equations”, International Journal of Numerical Methods for Heat & Fluid Flow, 22(7): 880-895 (2012)
  16. Gupta S. ad Ray S., “Comparison between homotopy perturbation method and optimal homotopy asymptotic method for the soliton solutions of Boussinesq–Burger equations”, Computers and Fluids, 103: 34-41 (2014)
  17. Nascimento A., Silveria-Neto F. P. M. A. and Padilla E. L. M., “A comparison of Fourier pseudospectral method and