SavedAdd your journal

Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2022 / Cilt: 28 - Sayı: 5

Induction heated metal hydride tube for hydrogen storage system

Hidrojen depolama sistemi için indüksiyon ısıtmalı metal hidrür tüp

Salih NACAR
Selim ÖNCÜ
Muhammet KAYFECİ
Pages
676–680
Publication Date
2022-10-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The temperature of the tube is controlled by hysteresis on-off control due to its simple structure and easy applicability. 16-bit DSPIC33FJ16GS502 is used in the control of the system.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the metal tube is heated up to a certain temperature by induction heating method so that the hydrogen stored by metal hydride method in it can be discharged.
📊
Key Findings & Data:The closed loop controlled 300 W SRI is designed to set the temperature of the tube to the reference temperature of 250 °C.
💡
Conclusion & Impact:The temperature of the tube is controlled by hysteresis on-off control due to its simple structure and easy applicability. 16-bit DSPIC33FJ16GS502 is used in the control of the system.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:İndüksiyon ısıtma · Seri rezonans evirici · ZVS

Abstract

In this study, the metal tube is heated up to a certain temperature by induction heating method so that the hydrogen stored by metal hydride method in it can be discharged. The voltage fed series resonant inverter (SRI) is used in the power stage of the system and the power switches are turned on under soft-switching conditions. The closed loop controlled 300 W SRI is designed to set the temperature of the tube to the reference temperature of 250 °C. The power control of SRI is realized by frequency control. The temperature of the tube is controlled by hysteresis on-off control due to its simple structure and easy applicability. 16-bit DSPIC33FJ16GS502 is used in the control of the system.

Özet

Bu çalışmada metal tüp, içerisine metal hidrür yöntemi ile depolanan hidrojenin deşarj edilebilmesi için indüksiyon ısıtma yöntemi ile belirli bir sıcaklığa kadar ısıtılmıştır. Sistemin güç katında gerilim beslemeli seri rezonans inverter (SRI) kullanılmış ve güç anahtarları yumuşak anahtarlama şartlarında iletime geçirilmiştir. Metal tüpün sıcaklığını referans sıcaklığı olan 250 °C’e sabitlemek için kapalı çevrim kontrollü 300 W’lik SRI tasarlanmıştır. SRI’nın güç kontrolü frekans kontrol tekniği ile gerçekleştirilmiştir. Tüpün sıcaklığı, basit yapısından ve kolay uygulanabilir olduğundan dolayı histerezis on-off kontrol ile denetlenmiştir. Sistemin kontrolünde 16-bit DSPIC33FJ16GS502 kullanılmıştır.

🔖

Cite This Article

NACAR, S., ÖNCÜ, S., KAYFECİ, M. (2022). Induction heated metal hydride tube for hydrogen storage system. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 28 - Sayı: 5, 676–680. https://ajindex.com/articles/696839

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Boztepe C. “Synthesis of magnetic field sensitive poly(AAm-co-VSA)-PVA/Fe3O4 nanospheres and investigation of their drug release behaviors under AMF”. European Journal of Science and Technology, 24, 93-97, 2021
  2. Olgun ÖH, Çavdar U. “Effects of induction heating in welding of carbon fiber reinforced thermoplastic composites”. Journal of Balıkesir University Institute of Science and Technology, 20(2), 591-604, 2018
  3. Taştan M. “Adaptive notch filter bank based power quality analysis of an ultra-high frequency induction heating system”. Balkan Journal of Electrical & Computer Engineering, 7(2), 131-136, 2019
  4. Çivi C, Yılmaz T, Başaran A. “Evaluation of using induction heating in food processing”. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 7(2019), 158-168, 2019
  5. Gökozan, H. “The effect of an induction heating system on power quality parameters”. European Journal of Science and Technology, 21, 25-30, 2021
  6. Kawashima R, Mishima T, Ide C. “Three-phase to singlephase multiresonant direct AC-AC converter for metal hardening high-frequency induction heating applications”. IEEE Transactions on Power Electronics, 36(1), 639-653, 2021
  7. Sarnago H, Lucia O, Perez-Tarragona M, Burdio JM. “Dualoutput boost resonant full-bridge topology and its modulation strategies for high-performance induction heating applications”. IEEE Transactions on Industrial Electronics, 63(6), 3554-3561, 2016
  8. Çalık H, Yalçın G, Şehirli E. “Power factor correction in induction heating system using PFC boost converter”. European Journal of Technique, 10(2), 464-475, 2020
  9. Baranoğlu B, Özbek ME, Aydın E. “Experimental analysis of an electromagnetic pulse forming systems pre-heated by induction”. Journal of The Faculty of Engineering and Architecture of Gazi University, 35(4), 2101-2112, 2020
  10. Nagarajan B, Sath RR, Vishnuram P. “Fuzzy logic based voltage control scheme for improvement in dynamic response of the class D inverter based high frequency induction heating system”. Turkish Journal of Electrical Engineering & Computer Sciences, 24(2016), 2556-2574, 2016
  11. Başkurt Y, Karaca H. “Evaluation of half-bridge resonant inverter topologies”. Dokuz Eylul University Faculty of Engineering Journal of Science and Engineering, 22(65), 505-515, 2020
  12. Sarnago H, Lucia O, Mediano A, Burdio JM. “Analytical model of the half-bridge series resonant inverter for improved power conversion efficiency and performance”. IEEE Transactions on Power Electronics, 30(