SavedAdd your journal

Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2014 / Cilt: 2 - Sayı: 3

COMPARISON OF SHORT DENTAL IMPLANTS UNDER DIFFERENT LOADING CONDITIONS AND LOCATIONS

FARKLI YÜKLEME ŞARTLARI VE YERLEŞİMLERDE KISA DENTAL İMPLANTLARIN KARŞILAŞTIRILMASI

Emre OZYILMAZ
Halil AYKUL
Eda OZYILMAZ
Mehmet DALKIZ
Pages
261–265
Publication Date
2014-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finite Element analysis is done by applying material properties, contact properties, physiological loading and boundary conditions with the use of Ansys Workbench

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Dental implant restoration has been widely accepted as one of the treatment modalities to replace missing teeth and to restore human masticatory function.
📊
Key Findings & Data:The use of short dental implants are increased thanks to its advantages according to long dental implants when the quality of bone is lower.
💡
Conclusion & Impact:Finite Element analysis is done by applying material properties, contact properties, physiological loading and boundary conditions with the use of Ansys Workbench
🔬Design:Modeling & Simulation
📍Scope:2013 Verileri
⚙️Variables:Kısa Dental İmplantlar · Sonlu Eleman Analizi · Çene Kemiği

Abstract

Dental implant restoration has been widely accepted as one of the treatment modalities to replace missing teeth and to restore human masticatory function. The finite element method (FEM) has been a useful tool in studying the bone-to-implant interface under mechanical loading. The use of short dental implants are increased thanks to its advantages according to long dental implants when the quality of bone is lower. The aim of this study was to analyse the effects of implant diameter, length and loading conditions on short dental implants. A three dimensional (3D) model of short dental implants were made with different sizes and types. Dental implant designs were performed on Solidworks 2013. The mandible model is obtained from Computed Tomography then transferred to 3D model. Finite Element analysis is done by applying material properties, contact properties, physiological loading and boundary conditions with the use of Ansys Workbench

Özet

Dental implant restorasyonu, eksik dişlerin yerini dolduracak ve insan çiğneme fonksiyonunun yeniden kazanılmasını sağlayacak en yaygın tedavi yöntemlerinden biri olarak kabul edilmiştir. Sonlu elemanlar yöntemi (FEM) mekanik yük altında kemik-implant arayüz çalışmalarında yararlı bir araç olmuştur. Kısa dental implantların kullanımı, kemiğin kalitesi düşük olduğunda uzun dental implantlara göre daha avantajlı olduğu için artmıştır. Bu çalışma, kısa dental implantlarda implant çapı, uzunluğu ve yükleme koşullarının etkilerinin görülmesi amacıyla gerçekleştirilmiştir. Kısa dental implantların üç boyutlu (3D) modeli farklı boyutlarda ve farklı dizaynlarda yapılmıştır. Dental implantların tasarımları Solidworks 2013 programıyla oluşturulmuştur. Üç boyutlu çene kemiği modeli bilgisayarlı tomografiyle elde edilmiştir. Sonlu eleman analizleri ise malzeme özellikleri, temas özellikleri, fizyolojik yükleme ve sınır şartları girilerek Ansys Workbench programıyla yapılmıştır.

🔖

Cite This Article

OZYILMAZ, E., AYKUL, H., OZYILMAZ, E., DALKIZ, M. (2014). COMPARISON OF SHORT DENTAL IMPLANTS UNDER DIFFERENT LOADING CONDITIONS AND LOCATIONS. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 2 - Sayı: 3, 261–265. https://ajindex.com/articles/693467

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Baggi. L. Cappelloni, I., Girolamo, M.D., Maceri, F., Vairo, G., 2008. The Influence of Implant Diameter and Length on Stress Distribution of Osseointegrated Implants Related to Crestal Bone Geometry: a Three Dimensional Finite Element Analysis. J Prosthet Dent; 100:422–31.
  2. Binon, P.P., Sutter, F., Beaty, K., Brusnki, J., Gulbransen, H., Weiner, R., 1994. The Role of Screws in Implant Systems. 9(Supplement): 48–63. Maxillofac Implants; Brunski, J. B., 1997. “Biomechanics of Dental Implants.” in Implants in Dentistry, pp, 63–71.
  3. Brunski, J.B., Puleo, D.A., Nanci, A., 2000. “Biomaterials and Biomechanics of Oral and Maxillofacial Implants: Current International Journal of Oral and Maxillofacial Implants. Vo, 15. no. 1. pp. 15–46. Developments.” Celik, G., Uludag, B., 2007. Photoelastic Stress Analysis of Various Retention Mechanisms on 3-implant- retained Mandibular Overdentures. J Prosthet Dent; 97:229–35.
  4. Friberg, B., Grondahl, K., Lekholm, U., Branemark, P.I., 2000. Long-term Follow-up of Severely Atrophic Edentulous Mandibles Reconstructed with Short Branemark implants. Clin Implant Dent Relat Res; 2:184–9.
  5. Geng, J.P., Ma, Q.S., Xu, W., Tan, K.B.C., Liu, G.R., 2004. Finite ElementAanalysis of Four Thread-form Configurations in a Stepped Screw Implant. J Oral Rehabil; 31:233–9.
  6. Goodacre, C.J., Bernal, G., Rungcharassaeng, K., Kan, J.Y.K., 2003. Clinical Complications with Implants and Implant Prostheses. J Prosthet Dent; 90:121–32.
  7. Henry, P.J., Laney, W.R., Jemt, T., Harris, D., Krogh, P.H., Polizzi, G., 1996. Osseointegrated Implants for Single- tooth Replacement: a Prospective 5-year Multicenter Study. Int J Oral Maxillofac Implant; 11:450–5.
  8. Lemons, J.E., 2004. “Biomaterials, Biomechanics, Tissue Healing. and Immediate-function Dental Implants.” The Journal of Oral Implantology. vol. 30. no. 5. pp. 318–324.
  9. Ochiai, K.T., Willians, B.H., Hojo, S., Nishimura, R., Caputo, A.A., 2004. Photoelastic Analysis of the Effect of Palatal Support on Various Implant-supported Overdenture Designs. J Prosthet Dent; 91:421–7. Sa´nches-Garce´s, M.A., Costa-Berenguer. X., Gay- Escoda, C., 2010. Short Implants: A Descriptive Study of 273 Implants. Clin Implant Dent Relat Res. Skalak, R., 1985. Aspects of Biomechanical Considerations. In: Branemark P-I. Zarb GA. Albreksson T. eds. Tissueintegrated Prostheses – Osseointegration in Clinical Dentistry. Chicago. IL: Quintessence: 117–128.
  10. Sotto-Maior, B.S., Senna, P.M., Silva, W.J., Rocha, E.P., Cury, A.A.D.B., 2012. Influen