Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2021 / Cilt: 9 - Sayı: 3

EFFECTS OF NICKEL OXIDE ADDITIVE ON PHYSICAL PROPERTIES OF ASPHALT BINDER AND STABILITY OF ASPHALT MIXTURE

NİKEL OKSİT KATKI MADDESİNİN ASFALT BAĞLAYICININ FİZİKSEL ÖZELLİKLERİNE VE KARIŞIMIN STABİLİTESİNE ETKİLERİ

Pages
894–899
Publication Date
2021-09-21
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the Marshall stability test, it was calculated that the stability value increased by 4.21% and Marshall flow value was found to have increased by 5%.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, nickel modified asphalt binder (NMAB) was obtained by modifying the asphalt binder at various rates with a new additive that has metallic properties, the active ingredient of which is nickel oxide.
📊
Key Findings & Data:As a result of the physical and performance experiments performed on the NMAB, it was observed that there were changes in the physical properties of asphalt that could be considered more suitable for use in cold climates.
💡
Conclusion & Impact:In the Marshall stability test, it was calculated that the stability value increased by 4.21% and Marshall flow value was found to have increased by 5%.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:NMAB · NiO · Asfalt Bağlayıcının Fiziksel Özellikleri

Abstract

In this study, nickel modified asphalt binder (NMAB) was obtained by modifying the asphalt binder at various rates with a new additive that has metallic properties, the active ingredient of which is nickel oxide. As a result of the physical and performance experiments performed on the NMAB, it was observed that there were changes in the physical properties of asphalt that could be considered more suitable for use in cold climates. It has been determined that the penetration and ductility of the asphalt binder were increased whereas the viscosity and softening point decreased by the addition of the additive. In the Marshall stability test, it was calculated that the stability value increased by 4.21% and Marshall flow value was found to have increased by 5%.

Özet

Bu çalışmada etkin maddesi Nikel Oksit (NiO) olan metalik özellikli yeni bir katkı maddesi ile asfalt bağlayıcı çeşitli oranlarda modifiye edilerek Nikel Modifiye Asfalt Bağlayıcı (NMAB) elde edilmiştir. Elde edilen NMAB üzerinde yapılan fiziksel ve performans deneyleri sonucunda asfalt bağlayıcının fiziksel özelliklerinde soğuk iklimlerde kullanımı daha uygun sayılabilecek değişiklikler olduğu görülmüştür. Katkı maddesinin asfalt bağlayıcının penetrasyon değerini ve düktilitesini artırdığı, viskozite ve yumuşama noktasını düşürdüğü tespit edilmiştir. Yapılan Marshall stabilite ve akma testlerinde, modifikasyonun stabilite değerini %4.21, akma değerini ise %5 artırdığı belirlenmiştir.

🔖

Cite This Article

ÇALIŞICI, M. (2021). EFFECTS OF NICKEL OXIDE ADDITIVE ON PHYSICAL PROPERTIES OF ASPHALT BINDER AND STABILITY OF ASPHALT MIXTURE. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 9 - Sayı: 3, 894–899. https://ajindex.com/articles/693295

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Ahmad Nazki, M., Chopra, T., Chandrappa, A.K. 2020. Rheological properties and thermal conductivity of bitumen binders modified with graphene. Construction and Building Materials, 238: 117693. Elsevier Ltd. doi:10.1016/j.conbuildmat.2019.117693. Babalghaith, A.M., Koting, S., Ramli Sulong, N.H., Karim, M.R. 2019. Optimization of mixing time for polymer modified asphalt. IOP Conference Series: Materials Science and Engineering, 512(1). doi:10.1088/1757-899X/512/1/012030.
  2. Behnood, A., Olek, J. 2017. Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA). Construction and Building Materials, 151: 464–478. Elsevier Ltd. doi:10.1016/j.conbuildmat.2017.06.115. Calisici, M. 2009. Improvement of the aging resistance of bitumen by addition of synthetic metal and polymer additives. Gazi University. Caputo, P., Porto, M., Angelico, R., Loise, V., Calandra, P., Oliviero Rossi, C. 2020. Bitumen and asphalt concrete modified by nanometer-sized particles: Basic concepts, the state of the art and future perspectives of the nanoscale approach. Advances in Colloid and Interface Science, 285: 102283. Elsevier B.V. doi:10.1016/j.cis.2020.102283. Fazaeli, H., Amini, A.A., Nejad, F.M., Behbahani, H. 2016. Rheological properties of bitumen modified with a combination of FT paraffin wax (sasobit®) and other additives. Journal of Civil Engineering and Management, 22(2): 135–145. doi:10.3846/13923730.2014.897977. Geçkil, T., Seloğlu, M. 2019. Reaktif Terpolimerin Bitümün Kıvamına ve Sıcaklık Duyarlılığına Etkisi The Effect of Reactive Terpolymer on The Stiffness and Temperature Susceptibility of Bitumen. 31(1): 203–213.
  3. Günay, T., Ahmedzade, P. 2020. Physical and rheological properties of nano-TiO2 and nanocomposite modified bitumens. Construction and Building Materials, 243. doi:10.1016/j.conbuildmat.2020.118208. Karahancer, S., Enieb, M., Saltan, M., Terzi, S., Eriskin, E., Cengizhan, A., Akbas, M.Y. 2020. Evaluating mechanical properties of bitumen and hot mix asphalt modified with nano ferric oxide. Construction and Building Materials, 234: 117381. Elsevier Ltd. doi:10.1016/j.conbuildmat.2019.117381. KGM. 2013. Karayolu Teknik Şartnamesi. Karayolları Genel Müdürlüğü. Ankara.
  4. Kuloğlu, N., Yılmaz, M., Kök, B.V. 2008. Farkli PenetrasyonDereceleri̇neSahi̇p Asfalt. Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 13(1): 81–91.
  5. Lakshmi Shruthi, V., Kalpana, M., Vijayan, D.S. 2020. An e