Journals / Karaelmas Fen ve Mühendislik Dergisi / 2017 / Cilt: 7 - Sayı: 1

Prediction of Drillability of Rocks Based on Rock Properties Using Artificial Neural Networks ANN

Kayaç Özelliklerine Bağlı Olarak Kayaç Delinebilirliğinin Yapay Sinir Ağları YSA Metodu ile Tahmini

Pages
12–22
Publication Date
2017-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In conclusion, the DRI values estimated by the ANN models were found to be close to those obtained from experiments.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The objective of this paper is to develop a practical model for predicting the drilling rate index DRI based on mechanical, index and petrographic properties of rocks.
📊
Key Findings & Data:Accordingly, 14 data were used for network training and 7 data were used for testing, and the most meaningful was determined.
💡
Conclusion & Impact:In conclusion, the DRI values estimated by the ANN models were found to be close to those obtained from experiments.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Delme oranı indeksi · Kayacın mekanik özellikleri · Yapay sinir ağları

Abstract

The objective of this paper is to develop a practical model for predicting the drilling rate index DRI based on mechanical, index and petrographic properties of rocks. Artificial neural network ANN is employed in the models developed for predicting the DRI. For this purpose, experimental data obtained from drillability test carried out on different rocks in the laboratory were used. Furthermore, in addition to the mechanical i.e. uniaxial compressive and Brazilian tensile strengths and index i.e. Schmidt hardness and point load index properties, the results of petrographic analyses i.e. mean grain size, equivalent quartz content, degree of cementation were also used for the ANN modelling. The correlations between the DRI and rock properties were evaluated, and the parameters having high correlations were selected as input parameters for the ANN model. Accordingly, 14 data were used for network training and 7 data were used for testing, and the most meaningful was determined. The estimated DRI values from the ANN models were compared with the experimental DRI data. In conclusion, the DRI values estimated by the ANN models were found to be close to those obtained from experiments.

Özet

Bu çalışmanın amacı; kayaçların mekanik, indeks ve petrografik özelliklerinden yararlanarak pratik bir delinebilirlik indeks modeli DRI geliştirmektir. DRI’nın tahmin edilmesi için geliştirilen modellerde yapay sinir ağları YSA kullanılmıştır. Bu amaçla, laboratuvarda farklı kayaçlar üzerinde yapılan delinebilirlik deney verileri kullanılmıştır. Ayrıca kayaçların; mekanik tek eksenli basınç ve Brezilian çekme dayanımı ve indeks Schmidt sertlik ve nokta yükü dayanımı özelliklerinin yanı sıra petrografik analiz ortalama tane boyu, eş değer kuvars içeriği % , çimentolanma derecesi sonuçları da YSA modellemesi için kullanılmıştır. DRI ve kayaç özellikleri arasındaki korelasyon incelenmiş ve yüksek korelasyona sahip değişkenler YSA’na girdi parametresi olarak seçilmiştir. Buna göre 14 veri ağın eğitimi için, 7 veri ise test için kullanılmış ve en anlamlı sonucu veren model belirlenmiştir. Testler sonucunda tahmin edilen DRI sonuçları ile deneylerden elde edilen DRI sonuçlarının karşılaştırması yapılmıştır. Sonuç olarak YSA ile modellenen DRI sonuçlarının deneysel verilerden elde edilen sonuçlara oldukça yakın olduğu görülmüştür

🔖

Cite This Article

SAKIZ, U., YARALI, O., AYDIN, H. (2017). Prediction of Drillability of Rocks Based on Rock Properties Using Artificial Neural Networks ANN. Karaelmas Fen ve Mühendislik Dergisi, Cilt: 7 - Sayı: 1, 12–22. https://ajindex.com/articles/684013

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Adebayo, B., Opafunso, ZO., Akande, JM. 2010. Drillability and strength characteristics of selected rock in Nigeria, AU J. T., 14(1):56-60.
  2. Akün, ME., Karpuz, C. 2005. Drillability studies of surface set diamond drilling in Zonguldak region sandstones from Turkey. Technical Note, Int. J. Rock Mech. Min. Sci., 42:473-479.
  3. Howarth, DF., Rowland, JC. 1987. Quantitative assessment of rock texture and correlation with drillability and strength properties. Rock Mech. Rock Eng. 20: 57–85.
  4. İnan, A. 1999. Yapay sinir ağlarının güç sistemlerinde kullanım alanları. Kaynak Elektrik, 119: 104-114 ISRM. 1978. Suggested method for determining tensile strength of rock materials. Int. J. Rock Mech. Min. Sci. Geomech. 15: 99- 103. ISRM. 1979. Suggested method for determining the uniaxial compressive strength and deformability of rock. Int. J. Rock Mech. Min. Sci. Geomech. 16: 135-140. ISRM. 1985. Suggested methods for determining point load strength. Int. J. Rock Mech. Min. Sci. Geomech. 22(2): 51–60.
  5. Kahraman, S. 1999. Rotary and percussive drilling prediction using regression analysis. Int. J. Rock Mech. Min. Sci. 36: 981– 989. Kahraman, S. 2016. Estimating the penetration rate in diamond drilling in laboratory Works using the regression and artificial neural networks. Neural Process Lett., 43:523-535
  6. Kahraman, S., Bilgin, N., Feridunoğlu, C. 2003. Dominant rock proporties affecting penetration rate of percussive drills. Int. J Rock Mech. Min. Sci., pp. 711-723.
  7. Kahraman, S., Alber, M., Fener, M, Günaydın, O. 2010. The usability of Cerchar abrasivity index for the prediction of UCS and E of Misis Fault Breccia: regression and artificial neural networks analysis, Exp. Sys. with App., 37:8750-8756
  8. Karpuz, C., Paşamehmetoğlu, AC., Dinçer, T., Müftüoğlu, Y. 1990. Drillability studies on the rotary blast hole drilling on lignite overburden series. Int. J. Surfine Min. Reel., 4: 89-93.
  9. Khandelwal, M., Armaghani, DJ. 2016. Predicition of drillability of rocks with strength propertiess using a Hybrid GA-AAN technique. Geotech. Geo. Eng. 34 (5): 605- 620. Kramadibrata, S., Made, AR., Juanda, J., Simangunsong, GM., Priagung, N. 2001. The use of dimensional analysis to anlyse the relationship between penetration rate of Jack Hammer and rock properties and operational characteristics. Proc. Indonesian Mining Conf. and Exh., Jakarta, Indonesia McFeat-Smith. I., Fowell, RJ. 1977. Correlation of rock properties and the cutting performance of tunneling machines, In Proc. of a Conf. on