SavedAdd your journal

Journals / International Journal of 3D Printing Technologies and Digital Industry / 2019 / Cilt: 3 - Sayı: 1

PRODUCTION OF LONG GEOMETRIC PARTS WITH 3D PRINTERS

3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ

Ahmet KÖBELOĞLU
Kerim ÇETİNKAYA
Pages
11–18
Publication Date
2019-04-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that the obtained piece was resistant.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it is searched that the 3D printer can produce the parts with longer geometry than the printing area of ​​standard 3D printers.
📊
Key Findings & Data:The solid model of the long workpiece to be produced is sliced ​​in computer-aided design programs and the production of separate code is provided for each slice, and the production of these pieces is realized end to end and the piece is obtained.
💡
Conclusion & Impact:It was observed that the obtained piece was resistant.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:3B Baskı

Abstract

In this study, it is searched that the 3D printer can produce the parts with longer geometry than the printing area of ​​standard 3D printers. The solid model of the long workpiece to be produced is sliced ​​in computer-aided design programs and the production of separate code is provided for each slice, and the production of these pieces is realized end to end and the piece is obtained. It was observed that the obtained piece was resistant.

Özet

Bu çalışmada standart 3B yazıcıların baskı alanına göre daha uzun geometriye sahip parçaların 3B yazıcı ile üretilebilirliği araştırılmıştır. Üretilecek uzun iş parçasına ait katı model, bilgisayar destekli tasarım programlarında dilimlenerek her bir dilim için ayrı kod üretimi sağlanmış ve bu parçaların üretimleri uç uca gerçekleştirilerek yekpare parça elde edilmiştir. Elde edilen parçanın mukavemetli olduğu gözlenmiştir.

Keywords
🔖

Cite This Article

KÖBELOĞLU, A., ÇETİNKAYA, K. (2019). PRODUCTION OF LONG GEOMETRIC PARTS WITH 3D PRINTERS. International Journal of 3D Printing Technologies and Digital Industry, Cilt: 3 - Sayı: 1, 11–18. https://ajindex.com/articles/672323

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Kaya G., Çetinkaya K., “Vidalı Transfer Sistemlerine Sahip Kartezyen Tipi 3B Yazıcılarda Gıda Malzemesi Yazdırma Parametrelerinin Karşılaştırılması”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (16-24). Antalya, 2017 Huri P., (2017), “3D Biyobaskı İle Anatomik Şekilli Kemik Dokusu Üretimi”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (60-62). Antalya, 2017
  2. Aydın K., Gök A., Gül F., “Mühendislik Eğitimi İçin Malzeme Kristal Kafes Yapılarının Modellenmesi Ve 3 Boyutlu Baskısı”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (109-118). Antalya, 2017.
  3. Şahin A., Şahin T., Gökçe H., Eren O., “Hasarlı Dişlilerin Tersine Mühendislik Yaklaşımıyla Yeniden Oluşturulması”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (126-134), Antalya, 2017.
  4. Godoi F.C., Prakash S., Bhandari B.R.,”3d printing technologies applied for food design: Status and prospects”, Journal of Food Engineering 179 (2016) 44e54 Biswas P., Mamatha S., Naskar S., Rao Y.S., Johnson R., Padmanabham G., “3D extrusion printing of magnesium aluminate spinel ceramic parts using thermally induced gelation of methyl cellulose”, Journal of Alloys and Compounds 770 (2019) 419e423 Chen Z., Li Z., Li J., Liu C., Lao C., Fu Y., Liu C., Li Y., Wang P., He Y., “3D printing of ceramics: A review”, Journal of the European Ceramic Society 39 (2019) 661–687
  5. Maleksaeedi S., Eng H., Wiria F. E., Ha T.M.H., He Z., “Property enhancement of 3D-printed alumina ceramics using vacuumin filtration”, Journal of Materials Processing Technology 214 (2014) 1301–1306
  6. Mamatha S., Biswas P., Ramavath P., Das D., Johnson R., “3D printing of complex shaped alumina parts”, Ceramics International 44 (2018) 19278–19281
  7. Satyanarayana B., Prakash K. J., “Component Replication using 3D Printing Technology”, Procedia Materials Science 10 ( 2015 ) 263 – 269 Sathish T., Vijayakumar M. D., Ayyangar A. K., “Design and Fabrication of Industrial Components Using 3D Printing”,Materials Today: Proceedings 5 (2018) 14489–14498
  8. Awad A., Trenfield S. J., Gaisford S.,. Basit A.W., “3D printed medicines: A new branch of digital healthcare”, International Journal of Pharmaceutics 548 (2018) 586–596 https://www.voxeljet.com/3d-drucksysteme/vx4000/ (erişim tarihi: 09.04.2019) http://www.sciaky.com/additive-manufacturing/metal-additive-manufacturing-systems (erişim tarihi: 09.04.2019) http://wwwassets.e-ci.com/PDF/Products/baam-fact-sheet.pdf (erişim tarihi: 09.04.2019) https://www.matterhackers.