Results showed that commingled yarn tenacity and mixture quality were highly affected by changing the air pressures.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:This work presents manufacturing of glass/polypropylene commingled yarns and analysis of low velocity impact (15J, 25J, and 35J) and compression after impact (CAI) performance of thermoset and thermoplastic composites produced from the hybrid commingled yarns.
📊
Key Findings & Data:Impact tests indicated that thermoplastic composites absorbed around 73-80% of the impact energy while thermoset composites absorbed 39-41%.
💡
Conclusion & Impact:Results showed that commingled yarn tenacity and mixture quality were highly affected by changing the air pressures.
This work presents manufacturing of glass/polypropylene commingled yarns and analysis of low velocity impact (15J, 25J, and 35J) and compression after impact (CAI) performance of thermoset and thermoplastic composites produced from the hybrid commingled yarns. Hybrid commingled yarns were produced through an air jet nozzle at different air pressures. Results showed that commingled yarn tenacity and mixture quality were highly affected by changing the air pressures. Impact tests indicated that thermoplastic composites absorbed around 73-80% of the impact energy while thermoset composites absorbed 39-41%. CAI tests presented that thermoplastic composite had higher residual strength with a different failure mechanism under compressive loading.
Boria, S., A. Scattina, and G. Belingardi, (2017).Impact behavior of a fully thermoplastic composite. Compos Struct, vol. 167, pp. 63-75
Sonnenfeld, C., H. Mendil-Jakani, R. Agogue, P. Nunez, and P. Beauchene, (2017).Thermoplastic/thermoset multilayer composites: A way to improve the impact damage tolerance of thermosetting resin matrix composites. Compos Struct, vol. 171, pp. 298-305
Vendramini, J., C. Bas, G. Merle, P. Boissonnat, and N. D. Alberola, (2000).Commingled poly(butylene terephthalate)/unidirectional glass fiber composites: Influence of the process conditions on the microstructure of poly(butylene terephthalate). Poly Compos, vol. 21, pp. 724-733
Bernet, N., V. Michaud, P. E. Bourban, and J. A. E. Månson, (2001).Commingled yarn composites for rapid processing of complex shapes. Compos Part A, vol. 32, pp. 1613-1626
Trudel-Boucher, D., B. Fisa, J. Denault, and P. Gagnon, (2006).Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics. Compos Sci Technol, vol. 66, pp. 555-570
Bar, M., A. Das, and R. Alagirusamy, (2017).Studies on flax-polypropylene based low-twist hybrid yarns for thermoplastic composite reinforcement. J of Reinf Plast and Compos, vol. 36, pp. 818-831
Schafer, J., O. Stolyarov, R. Ali, C. Greb, G. Seide, and T. Gries, (2015).Process-structure relationship of carbon/ polyphenylene sulfide commingled hybrid yarns used for thermoplastic composites. J of Ind Tex, vol. 45, pp. 1661-1673
Alagirusamy, R., R. Fangueiro, V. Ogale, and N. Padaki, (2006).Hybrid yarns and textile preforming for thermoplastic composites. Text Prog, vol. 38, pp. 1-71
Mader, E., C. Rothe, and S.-L. Gao, (2007).Commingled yarns of surface nanostructured glass and polypropylene filaments for effective composite properties. J of Mat Sci, vol. 42, pp. 8062-8070
Mader, E., J. Rausch, and N. Schmidt, (2008).Commingled yarns – processing aspects and tailored surfaces of polypropylene/glass composites. Compos Part A, vol. 39, pp. 612-623
Legrand, X., C. Cochrane, and V. Koncar, (2016). A complex shaped-reinforced thermoplastic composite part made of commingled yarns with an integrated sensor. Smart Textiles and their Applications, V. Koncar, Oxford: Woodhead Publishing, pp. 353-374
Hufenbach, W., M. Gude, R. Böhm, and M. Zscheyge, (2011).The effect of temperature on mechanical properties and failure behaviour of hybrid yarn textile-reinforced thermoplastics. Mat