Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2016 / Cilt: 4 - Sayı: 2

Investigation of AA 2024 Alloy Incremental Formability with Three Dimensional Laser Scanning Method

AA 2024 Levhanın Artışlı Şekillendirilebilirliğinin Üç Boyutlu Lazer Tarama Metoduyla İncelenmesi

Pages
704–710
Publication Date
2016-03-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Three dimensional laser scanning method has been used to be able to examine the geometrical accuracies of the parts attained following the formings within the frame of the high precision values.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the behaviors of the incremental sheet forming which is increasing day by day in the sheet metal forming sector and which realizes the requests in low number and showing variability as cheap in terms of economy and in short time in terms of time have been examined in different parameters.
📊
Key Findings & Data:AA 2024-T3 sheets with the thickness of 1 mm have been preferred as material.
💡
Conclusion & Impact:Three dimensional laser scanning method has been used to be able to examine the geometrical accuracies of the parts attained following the formings within the frame of the high precision values.
🔬Design:Research Article
📍Scope:2024 Verileri
⚙️Variables:Artışlı şekillendirme yöntemi · AA 2024 · Üç boyutlu lazer tarama yöntemi

Abstract

In this study, the behaviors of the incremental sheet forming which is increasing day by day in the sheet metal forming sector and which realizes the requests in low number and showing variability as cheap in terms of economy and in short time in terms of time have been examined in different parameters. In the study, single point incremental sheet forming has been used out of the types of incremental sheet forming. AA 2024-T3 sheets with the thickness of 1 mm have been preferred as material. Formings have been performed by determining a reference geometry and by changing the tool path, vertical feeds and the lubricates used for the lubrication. Spindle speed, tool diameter and feed rate values have been kept constant during the study. Three dimensional laser scanning method has been used to be able to examine the geometrical accuracies of the parts attained following the formings within the frame of the high precision values.

Özet

Bu çalışmada, günümüzde sac metal şekillendirme sektöründe giderek artan ve çeşitlilik gösteren az sayıdaki talepleri ekonomik açıdan ucuz, zaman açısından da kısa sürede gerçekleştiren artışlı şekillendirme yönteminin değişik parametrelerdeki davranışları incelenmiştir. Çalışmada, artışlı şekillendirme yönteminin çeşitlerinden tek noktalı artışlı şekillendirme yöntemi kullanılmıştır. Malzeme olarak ise 1 mm kalınlığındaki AA 2024-T3 levhalar tercih edilmiştir. Referans bir geometri belirlenip takım yolları, dikey ilerlemeler ve yağlama için kullanılan yağlar değiştirilerek şekillendirmeler yapılmıştır. Takım devri, takım çapı ve yatay ilerleme değerleri ise çalışma boyunca sabit tutulmuştur. Şekillendirmeler sonrasında elde edilen parçaların geometrik doğruluklarını yüksek hassasiyet değerleri çerçevesinde inceleyebilmek için üç boyutlu lazer tarama yöntemi kullanılmıştır.

🔖

Cite This Article

BAYRAM, H., KÖKSAL, N. S. (2016). Investigation of AA 2024 Alloy Incremental Formability with Three Dimensional Laser Scanning Method. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 4 - Sayı: 2, 704–710. https://ajindex.com/articles/661056

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. L. V. Sy Università degli Studi di Padova (2009) 205. J. J. Park, Y. H. Kim Journal of Materials Processing Technology 140(1) (2003) 447-453.
  2. H. Bayram, N. S. Köksal C.B.Ü. Fen Bilimleri Dergisi 11.1 (2015) 49-58.
  3. Y. H. Kim, J. J. Park Journal of materials processing technology 130 (2002) 42-46.
  4. J. Jeswiet, F. Micari, G. Hirt, A. Bramley, J. Duflou, J. Allwood CIRP Annals-Manufacturing Technology 54(2) (2005) 88-114.
  5. M. Ham, J. Jeswiet CIRP Annals-Manufacturing Technology 55(1) (2006) 241-244.
  6. M. Durante, A. Formisano, A. Langella Journal of Materials Processing Technology 210(14) (2010) 1934-1941.
  7. J. J. Park, Y. H. Kim Journal of Materials Processing Technology 140(1) (2003) 447-453.
  8. D. H. Nimbalkar, V. M. Nandedkar Int J Eng Res Appl 3(5) (2013) 39-51