Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2022 / Cilt: 10 - Sayı: 3

Preconcentration of Copper Ions from Aqueous Solution using EDTA Modified Prunus Dulcis L. Peels and Determination by FAAS

EDTA ile Modifiye Edilmiş Prunus Dulcis L. Kabukları Kullanılarak Bakır İyonlarının Sulu Çözeltiden Zenginleştirilmesi ve FAAS ile Tayini

Pages
1476–1488
Publication Date
2022-07-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The highest biosorbent capacity for copper ion was calculated as 34.60 mg g-1 for raw Prunus Dulcis L. peels and 42.19 mg g-1 for EDTA modified Prunus Dulcis L. peels from the Langmuir isotherm model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In recent years, natural wastes such as cheap and abundant fruit and vegetable peels, which are called agricultural wastes, have been used as an effective biosorbent in the removal and preconcentration of metal ions due to the storage problems they cause in nature.
📊
Key Findings & Data:As the preconcentration method, the solid phase extraction method was studied in the column system and parameters such as pH, eluent solution, column flow rate, sample volume were optimized.
💡
Conclusion & Impact:The highest biosorbent capacity for copper ion was calculated as 34.60 mg g-1 for raw Prunus Dulcis L. peels and 42.19 mg g-1 for EDTA modified Prunus Dulcis L. peels from the Langmuir isotherm model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Katı faz özütleme · Bakır · Eser element

Abstract

In recent years, natural wastes such as cheap and abundant fruit and vegetable peels, which are called agricultural wastes, have been used as an effective biosorbent in the removal and preconcentration of metal ions due to the storage problems they cause in nature. In this study, Prunus Dulcis L. peels, a low-cost biosorbent as an agricultural waste, modified with ethylenedinitrilo tetra acetic acid (EDTA) were used for the preconcentration of copper ions from aqueous solutions and for the determination by atomic absorption spectrometry. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analyzes were used for the characterization of the prepared biosorbent. As the preconcentration method, the solid phase extraction method was studied in the column system and parameters such as pH, eluent solution, column flow rate, sample volume were optimized. The mean recovery and relative standard deviation (RSD) values were found to be as 99.4±1.4% and 2.23% for Cu(II) ions. Langmuir and Freundlich isotherm graphs were drawn to determine the capacity of the biosorbent. The highest biosorbent capacity for copper ion was calculated as 34.60 mg g-1 for raw Prunus Dulcis L. peels and 42.19 mg g-1 for EDTA modified Prunus Dulcis L. peels from the Langmuir isotherm model.

Özet

Son yıllarda, tarımsal atık olarak adlandırılan, ucuz ve bol miktarda bulunan meyve ve sebze kabukları gibi doğal atıklar, doğada oluşturdukları depolanma sorunları nedeniyle, metal iyonlarının gideriminde ve zenginleştirilmesinde etkili bir biyosorbent olarak kullanılmaktadır. Bu çalışmada, tarımsal bir atık olarak, düşük maliyetli bir biyosorbent olan Prunus Dulcis L. kabukları, etilendinitril tetra asetik asit (EDTA) ile modifiye edilmiş, sulu çözeltilerden bakır iyonlarının zenginleştirilmesi ve atomik absorpsiyon spektrometresi ile tayininde kullanılmıştır. Hazırlanan biyosorbentin karakterizasyonunda taramalı elektron mikroskobu (SEM) ve fourier dönüşümlü infrared spektroskopisi (FTIR) analizleri kullanılmıştır. Zenginleştirme yöntemi olarak katı faz özütleme yöntemi kolon sisteminde çalışılmış, pH, geri alma çözeltisi, kolon akış hızı, örnek hacmi gibi parametreler optimize edilmiştir. Ortalama geri kazanım ve bağıl standart sapma (RSD) değerleri Cu(II) iyonları için %99,43±1,14 ve %2,23 olarak bulunmuştur. Biyosorbentin kapasitesinin belirlenmesi amacıyla Langmuir ve Freundlich izoterm grafikleri çizilmiştir. Bakır iyonları için en yüksek biyosorbent kapasitesi Langmuir izoterm modelinden ham Prunus Dulcis L. kabukları için 34,60 mg g-1 EDTA ile modifiye edilmiş Prunus Dulcis L. kabukları için ise 42,19 mg g-1 olarak hesaplanmıştır. Yöntemin doğruluğunu teyit etmek için sertifikalı referans madde (ERML-CA021a) analizi yapılmış ve kantitatif sonuçlar elde edilmiştir.

🔖

Cite This Article

CANLIDİNÇ, R. S. (2022). Preconcentration of Copper Ions from Aqueous Solution using EDTA Modified Prunus Dulcis L. Peels and Determination by FAAS. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 10 - Sayı: 3, 1476–1488. https://ajindex.com/articles/660876

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. S. Kuppusamy, P. Thavamani, M. Megharaj, K. Venkateswarlu, Y. B. Lee, R. Naidu, “Oak (Quercus robur) acorn peel as a low-cost adsorbent for hexavalent chromium removal from aquatic ecosystems and industrial effluents,” Water Air Soil Pollution, vol. 227, no. 62, pp. 1-11, 2016. [2]N. E. Gümüş, B. Aşıkkutlu, H. B. Keskinkaya, C. Akköz, “Comparison of heavy metal absorption of some algae isolated from Altınapa Dam Lake (Konya),” Journal of Anatolian Environmental and Animal Sciences, no. 1, pp. 50-56, 2021. [3]P. Liang, Q. Ding, F. Song, “Application of multiwalled carbon nanotubes as solid phase extraction sorbent for preconcentration of trace copper in water samples,” Journal of Separation Science, vol. 28, pp. 2339–2343, 2005. [4]N. Ozkantar, E. Yilmaz, M. Soylak, M. Tuzen, “Pyrocatechol violet impregnated magnetic graphene oxide for magnetic solid phase microextraction of copper in water, black tea and diet supplements,” Food Chemistry, vol. 321, pp. 126737, 2020. [5]N. Al-Masoud, M. Habila, Z. A. ALOthman, T. S. S. Alomara, N. Alraqibah, M. Sheikh, A. A. Ghfar and M. Soylak, “Nano-clay as solid phase microextractor of copper, cadmium and lead for ultra-trace quantification by ICP-MS,” Analytical Methods, vol. 12, pp. 4949-4955, 2020. [6]S. Kilic, M. Kilic and M. Soylak, “The determination of toxic metals in some traditional cosmetic products and health risk assessment,” Biological Trace Element Research, vol. 199, pp. 2272–2277, 2021. [7]W. A Khan, M. B Arain and M. Soylak, “Nanomaterials-based solid phase extraction and solid phase microextraction for heavy metals food toxicity,” Food and Chemical Toxicology, vol.145, pp. 111704, 2020. [8]M. Tuzen, A. Elik, B. Hazer, S. Şimşek, N. Altunay, “Poly(styrene)-co-2-vinylpyridine copolymer as a novel solid-phase adsorbent for determination of manganese and zinc in foods and vegetables by FAAS,” Food Chemistry, vol. 333, pp. 127504, 2020. [9]N. Altunay, B. Hazer, M. Tuzen, A. Elik, “A new analytical approach for preconcentration, separation and determination of Pb(II) and Cd(II) in real samples using a new adsorbent:Synthesis, characterization and application,” Food Chemistry, vol. 359, pp. 129923, 2021. [10]Ö. Yalçınkaya, O. M. Kalfa, and A. R. Türker, “Chelating agent free-solid phase extraction (CAF-SPE) of Co(II), Cu(II) and Cd(II) by new nano hybrid material (ZrO2/B2O3),”Journal of Hazardous Materials, vol. 195, pp. 332-339, 2011. [11]M. Soylak, O. Ozalp and F. Uzcan, “Magnetic nanomaterials for the re