SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2017 / Cilt: 19 - Sayı: 56

The Production of ZnO and CuO Films by SILAR Method andCharacterization for Use in Photovoltaic Solar Cells

FOTOVOLTAİK GÜNEŞ PİLLERİNDE KULLANILAN ZNO VE CUO FİLMLERİNİN SILAR YÖNTEMİ İLE ÜRETİLMESİ VE KARAKTERİZASYONU

Olcay GENÇYILMAZ
Turan TAŞKÖPRÜ
Pages
468–483
Publication Date
2017-05-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The electrical resistivity values and conduction mechanism were investigated by using four-probe and hot-probe technique, respectively

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study; ZnO and CuO films were produced by SILAR (Successive Ionic Layer Adsorption and Reaction) technique which is a practically and economic.
📊
Key Findings & Data:The band gaps of films were calculated as 3.22 eV-1.72 eV using optic method.
💡
Conclusion & Impact:The electrical resistivity values and conduction mechanism were investigated by using four-probe and hot-probe technique, respectively
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fotovoltaik güneş pilleri · ZnO ve CuO filmleri · SILAR

Abstract

In this study; ZnO and CuO films were produced by SILAR (Successive Ionic Layer Adsorption and Reaction) technique which is a practically and economic. The films of structural, optical, ellipsometric, surface and electrical properties were determined by XRD diffactometer, UV spectrophotometer, Spectroscopic Ellipsomery (SE), Atomic Force Microscope (AFM), Four-Probe, respectively. The band gaps of films were calculated as 3.22 eV-1.72 eV using optic method. The thickness and some optic constants (extinction coefficient and refractive index) of films were investigated by SE. Also, the three dimensional surface images of films were obtained and the average surface roughness values were determined as 38 and 60 nm. The electrical resistivity values and conduction mechanism were investigated by using four-probe and hot-probe technique, respectively

Özet

Bu çalışmada ZnO ve CuO filmleri pratik ve ekonomik bir teknik olan SILAR (Successive Ionic Layer Adsorption and Reaction) yöntemi ile üretilmiştir. Filmlerin yapısal, optik, elipsometrik, yüzeysel ve elektrik özellikleri sırası ile XRD, UV spektroskopisi, Spektroskopik Elipsometre (SE), Atomik Kuvvet Mikroskobu (AFM) ve dört-uç tekniği kullanılarak incelenmiştir. Filmlerin yasak enerji aralıkları, optik metot kullanılarak 3,22 eV-1,72 eV olarak hesaplanmıştır. Spektroskopik elipsometre (SE) tekniği ile filmlerinin kalınlıkları ve bazı optik sabitleri (sönüm katsayısı ve kırılma indisi) belirlenmiştir. Ayrıca, filmlerin üç boyutlu yüzey görüntüleri incelenmiş ve ortalama yüzey pürüzlülük değerleri 38 nm and 60 nm olarak tespit edilmiştir. Filmlerin elektriksel özdirenç değerleri ve iletim tipi sırasıyla dört-uç metodu ve sıcak uç tekniği kullanılarak belirlenmiştir.

🔖

Cite This Article

GENÇYILMAZ, O., TAŞKÖPRÜ, T. (2017). The Production of ZnO and CuO Films by SILAR Method andCharacterization for Use in Photovoltaic Solar Cells. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 19 - Sayı: 56, 468–483. https://ajindex.com/articles/659212

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Terasako T., Murakami T., Hyodou A., Shirakata S. 2015. Structural and electrical properties of CuO films and n-ZnO/p-CuO prepared deposition based technique, Solar Energy Materials & Solar Cells, Cilt., 1016/j.solmat.2014.08.023 bath s. –79. DOI: Fahrenbruch A.L. 1997. II-VI Compounds in Journal of Crystal s. Growth, Cilt., 91. assited growth and DOI: Hu X., Gao F., Xiang Y., Wu H., Zheng X., Jiang J., Li J., Yang H., Liu S. 2016. Influence of oxygen pressure on the structural and electrical properties of CuO thin films prepared by pulsed laser deposition, Materials Letters, Cilt. 176, s. 282-284. DOI:10.1016/j.matlet.2016.04.055 Saadaldin N., Alsloum M.N., Hussain N. 2015. Preparing of Copper oxides Thin Films by Chemical Bath Deposition (CBD) for Using in Environmental Application, Energy Procedia, Cilt. 74, s. 1459-146. DOI: 1016/j.egypro.2015.07.794 Mbulanga C. M., Urgessa Z. N., Tankio Djiokap S.R., Botha J.R., Duvenhage M. M., Swart H. C. 2016. Surface characterization of ZnO nanorods grown by chemical bath deposition, Physica B: Condensed Matter, Cilt., 1016/j.physb.2015.07.016 DOI: Bedia A., Bedia F.Z., Aillerie M., Maloufi N., Benyoucef B. 2015. Morphological and optical properties of ZnO thin films prepared by spray pyrolysis on glass substrates at various temperatures for integration in solar cell, Energy Procedia, Cilt., 1016/j.egypro.2015.07.740 DOI: Cachoncinlle C., Hebert C., Perrière J., Nistor M., Petit A., Millon E. 2015. Random lasing of ZnO thin films grown by pulsed-lase deposition, Applied Surface Science, Cilt. 336, s. 107. 1016/j.apsusc.2014.09.186 Jayaraman V. K., Kuwabara Y. M., Álvarez A. M., Amador María de la luz O. 2016. Importance of substrate rotation speed on the growth of homogeneous ZnO thin films by reactive sputtering, Materials Letters, Cilt. 1016/j.matlet.2016.01.088 4. DOI: Maleki-Ghaleh H., Shahzadeh M., Hoseinizadeh S. A., Arabi A., Aghaie E., Siadati M. H. 2016. Evaluation of the behavior of nano-structured ZnO films electrodepositon process, Materials Letters, Cilt. 169, s. 140-143. DOI: 1016/j.matlet.2016.01.090 br Armelao L., Barreca D., Bertapelle M., Bottaro G., Sada C., Tondello E. A sol-gel approach to nanophasic copper oxide thin films, Thin Solid Films, Cilt. 442, No. 1–2, s. 48-52. DOI: 10.1016/S0040- (03)00940-4
  2. Gould R.D., Rahman M.S. 1981. Power-law currents in some ZnO- Sn composite materials, Applied Physics, Cilt. 14, s. 79-89.DOI: 1088/0022-3727/14/1/011 Chen A., Long H., Li X., Li Y., Yang G