Journals / Journal of Thermal Engineering / 2018 / Cilt: 4 - Sayı: 6

A REVIEW OF SINGLE-PHASE AND TWO-PHASE PRESSURE DROP CHARACTERISTICS AND FLOW BOILING INSTABILITIES IN MICROCHANNELS

Pages
2451–2463
Publication Date
2022-11-05
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Therefore, unstable flow boiling conditions were identified in this paper for a reliable design of micro heat exchangers.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study presents a comprehensive review on single and two-phase pressure drop characteristics and flow boiling instabilities in microchannels to outline the discrepancies in the literature.
📊
Key Findings & Data:Flow boiling instabilities affect the system performance and may cause system failures.
💡
Conclusion & Impact:Therefore, unstable flow boiling conditions were identified in this paper for a reliable design of micro heat exchangers.
🔬Design:Survey & Empirical Study
📍Scope:Comprehensive Sample
⚙️Variables:Instability · Microchannels · Pressure Drop

Abstract

This study presents a comprehensive review on single and two-phase pressure drop characteristics and flow boiling instabilities in microchannels to outline the discrepancies in the literature. The effect of mass flux, heat flux, experimental conditions, channel geometrical parameters (hydraulic diameter, aspect ratio etc.) was surveyed critically over a broad range of literature studies including the past and recent researches. Additionally, conventional and micro-scale pressure drop correlations are discussed. This study showed that the continuum theory is applicable for single-phase pressure drop applications with some considerations. Also, the two-phase pressure drop in micro-scale was found to have similar characteristics with conventional-scale channels. On the other hand, flow boiling instability is one of the important issues in microchannel heat exchangers. Flow boiling instabilities affect the system performance and may cause system failures. Therefore, unstable flow boiling conditions were identified in this paper for a reliable design of micro heat exchangers.

🔖

Cite This Article

SÖZBİR, Ö. R., ÖZDEMİR, M. R. (2022). A REVIEW OF SINGLE-PHASE AND TWO-PHASE PRESSURE DROP CHARACTERISTICS AND FLOW BOILING INSTABILITIES IN MICROCHANNELS. Journal of Thermal Engineering, Cilt: 4 - Sayı: 6, 2451–2463. https://ajindex.com/articles/652559

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Yin, J. M., Bullard, C. W., Hrnjak, P. S. (2002). Single-phase pressure drop measurements in a microchannel heat exchanger. Heat Transfer Engineering, 23(4), 3-12
  2. Bowers, M. B., Mudawar, I. (1994). Two-phase electronic cooling using mini-channel and micro-channel heat sinks: Part 2-Flow rate and pressure drop constraints. Journal of Electronic Packaging, 116(4), 298-305
  3. Daghighi, Y. (2015). Microfluidic Technology and its Biomedical Applications. Journal of Thermal Engineering (JTEN), 1(7), 621-626
  4. Shah, R. K., Sekulic, D. P. (2003). Fundamentals of heat exchanger design. John Wiley & Sons
  5. Hesselgreaves, J. E., Law, R., Reay, D. (2016). Compact heat exchangers: selection, design and operation. Butterworth-Heinemann
  6. Pfund, D., Rector, D., Shekarriz, A., Popescu, A., Welty, J. (2000). Pressure drop measurements in a microchannel. American Institute of Chemical Engineers. AIChE Journal, 46(8), 1496
  7. Xu, B., Ooti, K. T., Wong, N. T., Choi, W. K. (2000). Experimental investigation of flow friction for liquid flow in microchannels. International Communications in Heat and Mass Transfer, 27(8), 1165-1176
  8. Qu, W., Mudawar, I. (2002). Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink. International Journal of Heat and Mass Transfer, 45(12), 2549-2565
  9. Steinke, M. E., Kandlikar, S. G. (2006). Single-phase liquid friction factors in microchannels. International Journal of Thermal Sciences, 45(11), 1073-1083
  10. Mirmanto, M. (2013). Single-phase flow and flow boiling of water in horizontal rectangular microchannels (Doctoral dissertation, Brunel University School of Engineering and Design PhD Theses)
  11. Özdemir, M. R. Effect of aspect ratio on single-phase flow in microchannels (2016). ENTECH’16 IV. International Energy Technologies Conference, TURKEY, 15–15 December 2016. DAKAM Conference Series
  12. Sahar, A. M., Wissink, J., Mahmoud, M. M., Karayiannis, T. G., Ishak, M. S. A. (2017). Effect of Hydraulic Diameter and Aspect Ratio on Single Phase Flow and Heat Transfer in a Rectangular Microchannel. Applied Thermal Engineering
  13. Zhang, J., Diao, Y. H., Zhao, Y. H., Zhang, Y. N. (2014). An experimental study of the characteristics of fluid flow and heat transfer in the multiport microchannel flat tube. Applied Thermal Engineering, 65(1), 209-218
  14. Shen, S., Xu, J. L., Zhou, J. J., Chen, Y. (2006). Flow and heat transfer in microchannels with rough wall su