SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2021 / Cilt: 26 - Sayı: 3

Application of Atmospheric Pressure Plasma on Polypropylene

ATMOSFERİK BASINÇLI PLAZMA UYGULAMASI İLE POLİPROPİLEN MALZEMELERDE YÜZEY İŞLEMLERİ

Kadir ÇAVDAR
Kadir AYAS
Zahide ÖZTAŞ KAPLAN
Pages
1179–1190
Publication Date
2022-11-06
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, after giving general information about atmospheric pressure plasma, application of atmospheric pressure plasma especially on polypropylene (PP) material exemplified and comparisons are made with studies in similar fields.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Atmospheric pressure plasma treatment using plasma, which is the fourth state of matter, is used in many areas such as paintability and adhesion in automotive, moisture retention, air permeability, weight reduction and dirt repellency in textiles, bacterial inactivation in foods and acceleration of healing in medicine.
📊
Key Findings & Data:Application of atmospheric pressure plasma (APP) on polymers is an important and increasing topic because it has advantages such as surface modification, surface activation, surface cleaning, has many combinations and provides the expected properties by controlling its parameters (power, gas flow rate, etc.).
💡
Conclusion & Impact:In this study, after giving general information about atmospheric pressure plasma, application of atmospheric pressure plasma especially on polypropylene (PP) material exemplified and comparisons are made with studies in similar fields.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Atmosferik Plazma · Polipropilen · Yüzey Aktivasyonu

Abstract

Atmospheric pressure plasma treatment using plasma, which is the fourth state of matter, is used in many areas such as paintability and adhesion in automotive, moisture retention, air permeability, weight reduction and dirt repellency in textiles, bacterial inactivation in foods and acceleration of healing in medicine. Application of atmospheric pressure plasma (APP) on polymers is an important and increasing topic because it has advantages such as surface modification, surface activation, surface cleaning, has many combinations and provides the expected properties by controlling its parameters (power, gas flow rate, etc.). In this study, after giving general information about atmospheric pressure plasma, application of atmospheric pressure plasma especially on polypropylene (PP) material exemplified and comparisons are made with studies in similar fields.

Özet

Maddenin dördüncü hali olan plazmayı kullanan atmosferik basınçlı plazma işlemi otomotivde boyanabilirlik ve yapışma, tekstilde nem tutma, hava geçirgenliği, ağırlık azaltma ve kir iticilik, gıdalarda bakteri inaktivasyonu ve tıpta iyileştirme hızlandırma gibi birçok alanda kullanılmaktadır. Atmosferik basınçlı plazmanın (ABP) polimerler üzerinde kullanılması yüzey modifikasyonu, yüzey aktivasyonu sağlaması, yüzey temizliği gibi avantajlara sahip olması, pek çok kombinasyonu olması ve parametrelerinin (güç, gaz akış debisi vb.) kontrolü ile beklenen özellikleri sağlaması nedeniyle önemli ve popülerliği artan bir konudur. Bu derleme çalışmasında atmosferik basınçlı plazma hakkında genel bilgiler verildikten sonra özellikle polipropilen (PP) malzeme üzerinde atmosferik basınçlı plazma yönteminin uygulamaları örneklenmiş ve benzer alanlarda yapılan çalışmalarla karşılaştırmalar yapılmıştır.

🔖

Cite This Article

ÇAVDAR, K., AYAS, K., KAPLAN, Z. Ö. (2022). Application of Atmospheric Pressure Plasma on Polypropylene. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 26 - Sayı: 3, 1179–1190. https://ajindex.com/articles/643738

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Baniya, H. B., Guragain, R. P., Baniya, B. ve Subedi, D. P. (2020) Cold Atmospheric Pressure Plasma Jet for the Improvement of Wettability of Polypropylene, International Journal of Polymer Science, 2020. https://doi.org/10.1155/2020/3860259 2. Černáková, L., Černák, M., Tóth, A., Mikulášová, M., Tomašková, M. ve Kováčik, D. (2015) Chitosan immobilization to the polypropylene nonwoven after activation in atmospheric - Pressure Nitrogen Plasma, Open Chemistry, 13(1), 457–466. https://doi.org/10.1515/chem-2015-0055 3. Chen, G., Yin, M., Huang, J., Yu, J., Qu, S., Wang, X. ve Li, C. (2018) The polypropylene membran modified by an atmospheric pressure plasma jet as a seperator for lithium-ion button battery, Electrochimia Acta, 260 (2018), 489-497. https://doi.org/10.1016/j.electacta. 2017.12.119 4. Chen, W. X., Yu, J. S., Hu, W. ve Chen, G. L. (2016) Partial hydrophilic modification of biaxially oriented polypropylene film by an atmospheric pressure plasma jet with the allylamine monomer, Applied Surface Science, 387, 957–964. https://doi.org/10.1016/j.apsusc.2016.07.043 5. D’Agostino, R., Favia, P., Oehr, C. ve Wertheimer, M. R. (2005) Low-temperature plasma processing of materials: Past, present, and future, Plasma Processes and Polymers, 2(1), 7–15. https://doi.org/10.1002/ppap.200400074 6. Encinas, N., Abenojar, J. ve Martínez, M. A. (2012) Development of improved polypropylene adhesive bonding by abrasion and atmospheric plasma surface modifications, International Journal of Adhesion and Adhesives, 33, 1–6. https://doi.org/10.1016/j.ijadhadh.2011.10.002 7. Esen, S. G., Altuncu, E., Üstel, F. ve Akpınar, S. (2016) Different plasma scannıng velocities effect on surface wettability properties of polypropylene by atmospheric plasma surface activation, Sakarya Üniversitesi Fen Bilimleri Dergisi, 307–316. 8. Fang, Z., Xie, X., Li, J., Yang, H., Qiu, Y. ve Kuffel, E. (2009) Comparison of surface modification of polypropylene film by filamentary DBD at atmospheric pressure and homogeneous DBD at medium pressure in air, Journal of Physics D: Applied Physics, 42(8). https://doi.org/10.1088/0022-3727/42/8/085204 9. Gomez, E., Rani, D. A., Cheeseman, C. R., Deegan, D., Wise, M. ve Boccaccini, A. R. (2009) Thermal plasma technology for the treatment of wastes: A critical review, Journal of Hazardous Materials, 161(2–3), 614–626. https://doi.org/10.1016/j.jhazmat.2008.04.017 10. Hwang, Y. J., An, J. S., McCord, M. G., Park, S. W. ve Kang, B. C. (2003) The effect of