Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2022 / Cilt: 27 - Sayı: 1

CLASSIFICATION OF ORIGINAL AND COUNTERFEIT GOLD MATTERS BY APPLYING DEEP NEURAL NETWORKS AND SUPPORT VECTOR MACHINES

Yapay Sinir Ağları ve Destek Vektör Makineleri Kullanılarak Gerçek ve Sahte Altın Sınıflandırılması

Pages
89–102
Publication Date
2022-11-06
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Promising results are achieved with both sound and image processing techniques.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Gold is one of the most counterfeited precious metals.
📊
Key Findings & Data:When the chemical properties are concerned, wolfram is like gold (density of gold and tungsten are 19.30 g/ml and 19.25 g/ml, respectively), so it can be used as a chemical counterfeit.
💡
Conclusion & Impact:Promising results are achieved with both sound and image processing techniques.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:goruntu isleme · ses isleme · sahte altın farklılaşması

Abstract

Gold is one of the most counterfeited precious metals. The color of copper is like gold. For this reason, copper is one of the most used materials for color counterfeiting. When the chemical properties are concerned, wolfram is like gold (density of gold and tungsten are 19.30 g/ml and 19.25 g/ml, respectively), so it can be used as a chemical counterfeit. The purity of gold can be determined by X-ray, but this method is costly. The current low-cost methods of jewelers have been experimented with for counterfeit gold detection in this paper. When a gold matter is hit by a subject, the sound frequency is higher than the frequency of sound when the same experiment is done with copper. Furthermore, counterfeit gold color is brighter than real ones. The color of gold is unique, and it is called "gold yellow". In this research, by employing sound and image processing, counterfeit and original gold are differentiated. For the image processing part, first a Convolutional Neural Network (CNN)-based toolbox for segmenting the gold material is applied. Then, deep CNNs for differentiating the color of the gold and copper materials are employed. Promising results are achieved with both sound and image processing techniques.

Özet

Altın, en çok taklit edilen değerli metallerden biridir. Bakırın rengi altına benzer. Bu nedenle bakır, renk sahteciliği için en yaygın kullanılan malzemelerden biridir. Kimyasal özellikler söz konusu olduğunda, volfram altına benzer (altın ve tungstenin yoğunluğu sırasıyla 19.30 g/ml ve 19.25 g/ml'dir), bu nedenle kimyasal bir sahte olarak kullanılabilir. Altının saflığı X-ray ile belirlenebilir, ancak bu yöntem maliyetlidir. Bu yazıda, sahte altın tespiti için kuyumcuların mevcut düşük maliyetli yöntemleri ve sahte parayı tespit etmek için kullanılan düşük maliyetli yöntemler denenmiştir. Bir yüzeye altın bir madde çarptığında, ses frekansı aynı deney bakır ile yapıldığındaki sesin frekansından daha yüksektir. Ayrıca, sahte altın rengi gerçek olanlardan daha parlaktır. Altın rengi benzersizdir ve "altın sarısı" olarak adlandırılır. Bu araştırmada ses ve görüntü işleme yöntemleri kullanılarak sahte ve orijinal altın ayrımı yapılmıştır. Görüntü işleme kısmı için, önce görüntüden altını segmentlere ayırmak için CNN tabanlı bir araç kutusu uygulanır. Bundan sonra, altın ve bakır malzemelerin rengini ayırt etmek için derin Evrişimli Sinir Ağları kullanılır. Hem ses hem de görüntü işleme teknikleri ile umut verici sonuçlar elde edilmektedir.

🔖

Cite This Article

CAN, Y. S. (2022). CLASSIFICATION OF ORIGINAL AND COUNTERFEIT GOLD MATTERS BY APPLYING DEEP NEURAL NETWORKS AND SUPPORT VECTOR MACHINES. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 27 - Sayı: 1, 89–102. https://ajindex.com/articles/643714

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Alpaydin, E. (2021) Introduction to machine learning. MIT Press, Boston, USA
  2. Battaini, P., E. Bemporad, and D. De Felicis (2014) The fire assay reloaded. Gold Bulletin, 47 (1-2): 9-20. doi:10.1007/s13404-013-0101-1 3. Brill, M. and K.H. Wiedemann (1992) Determination of gold in gold jewellery alloys by ICP spectrometry. Gold Bulletin, 25 (1): 13-26. doi: 10.1007/BF03214719 4. Brill, M. Analysis of carat gold (1997) Gold technology, 22 (1): 10
  3. Can, Y. S., Alagoz, F., Özer, E., Gündebahar, M. (2015) Counterfeit gold identification using sound and image processing. 23rd Signal Processing and Communications Applications Conference (SIU), Malatya, Turkey, May 16-19, 2015. pp. 1074-1077. doi: 10.1109/SIU.2015.7130019 6. Caudill, M. (1987) Neural networks primer, part I. AI expert, 2 (12): 46-52
  4. Crain, G., Suarez, R. (2014) U.S. Patent Application No. 14/154,891
  5. Eames, D.A., Eames G. A., Eames M. A., inventors (2015) Device to test and authenticate precious metal objects. United States patent application US 14/661,466. Oct 29
  6. Glorot, X., Bengio, Y. (2010) Understanding the difficulty of training deep feedforward neural networks. Thirteenth international conference on artificial intelligence and statistics, Sardinia, Italy, 13-15 May 2010, pp. 249-256
  7. Hanrahan, J.F. (1962) The fire assay method as applied to high purity gold at the Rand Refinery, Limited. Journal of the Southern African Institute of Mining and Metallurgy, 62 (12): 712-727
  8. He, K., Zhang, X., Ren, S., Sun, J. (2016) Deep residual learning for image recognition. IEEE conference on computer vision and pattern recognition, Las Vegas, NV, USA, 27-30 June 2016, pp. 770–778. doi: 10.1109/CVPR.2016.90 12. Hill, T., Lewicki, P., Lewicki, P. (2006) Statistics: methods and applications: a comprehensive reference for science, industry, and data mining. StatSoft Inc., Oklahoma, OK, USA
  9. Ioffe, S. (2017). Batch renormalization: Towards reducing minibatch dependence in batch-normalized models. arXiv preprint arXiv:1702.03275
  10. Ismail, M. P., Sani, S., bin Mohd Shofri, F. S., Harun, M., Omar, N. B. (2018). Ultrasonic inspection of fake gold jewelry. IOP Conference Series: Materials Science and Engineering (Vol. 298, No. 1, p. 012025). IOP Publishing. doi: 10.1088/1757-899X/298/1/012025 15. Jalas, P., J.P. Ruottinen, and S. Hemminki (2002) XRF analysis of jewelry using fully standardless fundamental parameter approach. Gold technology, 35 (1): 28
  11. Karadjova, I., S. Arpadj