Journals / Turkish Journal of Physics / 2019 / Cilt: 43 - Sayı: 2

The effect of phenylboronic acid-based self-assembled monolayers on the performance of organic field-effect transistors (OFETs)

Pages
207–212
Publication Date
2022-11-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

To elucidate themechanism, dielectric/semiconductor interfaces were analyzed using atomic force microscope and contact angle techniques.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The dielectric/semiconductor interface is one of the most important components strongly affecting the performanceof organic field-effect transistors (OFETs).
📊
Key Findings & Data:Device performanceparameters, especially threshold voltage, current on/off ratio, and subthreshold slope, were improved.
💡
Conclusion & Impact:To elucidate themechanism, dielectric/semiconductor interfaces were analyzed using atomic force microscope and contact angle techniques.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The dielectric/semiconductor interface is one of the most important components strongly affecting the performanceof organic field-effect transistors (OFETs). To improve OFET parameters, we applied a series of phenylboronicacid derivatives as self-assembly molecules between dielectric and organic semiconductor layers. Device performanceparameters, especially threshold voltage, current on/off ratio, and subthreshold slope, were improved. To elucidate themechanism, dielectric/semiconductor interfaces were analyzed using atomic force microscope and contact angle techniques.

🔖

Cite This Article

ALIÇ, T. Y. (2022). The effect of phenylboronic acid-based self-assembled monolayers on the performance of organic field-effect transistors (OFETs). Turkish Journal of Physics, Cilt: 43 - Sayı: 2, 207–212. https://ajindex.com/articles/614137

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Horowitz, G. Adv. Polym. Sci. 2010, 223, 113-153
  2. Klauk, H. Chem. Soc. Rev. 2010, 39, 2643-2666
  3. Ma, H.; Hin-Lap, Y.; Huang, F.; Jen Alex, K. Y. Adv. Func. Mat. 2010, 20, 1371-1388
  4. Casalini, S.; Bortolotti, C. A.; Leonardi, F.; Biscarini, F. Chem. Soc. Rev. 2017, 46, 40-71
  5. Aghamohammadi, M.; Rödel, R.; Zschieschang, U.; Ocal, C.; Boschker, H.; Weitz, R. T.; Barrena, E.; Klauk, H.ACS Appl. Matet. Inter. 2015, 7, 22775-22785
  6. Schön, J. H.; Hong, M.; Bao, Z. Nature 2001, 413, 713-716
  7. Schön, J. H.; Hong, M.; Bao, Z. Adv. Mater. 2002, 14, 323-326
  8. Onclin, S.; Ravoo, B. J.; Reinhoudt, D. N. Angew. Chem. Int. Ed. 2005, 44, 6282-6304
  9. Kraft, U.; Takimiya, K.; Kang, M. J.; Rödel, R.; Letzkus, F.; Burghartz, J. N.; Weber, E.; Klauk, H. Organic Electronics 2016, 35, 33-40
  10. Zschieschang, U.; Ante, F.; Kälblein, D.; Yamamoto, T.; Takimiya, K.; Kuwabara, H.; Ikeda, M.; Sekitani, T.; Someya, T.; Nimoth, J. B. et al. Organic Electronics 2011, 12, 1370-1375.