Journals / Turkish Journal of Physics / 2017 / Cilt: 41 - Sayı: 2

The effect of sintering in different atmospheres on superconductivity parameters of YBCO

Pages
91–94
Publication Date
2022-11-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was also observed that the sample sintered in the 50% oxygen and 50% argon atmosphere showed the highest critical current density

📌 3 Key Takeaways

🎯
Objective & Hypothesis:YBa 2 Cu 3 O 7 (Y123) is a superconductor material discovered in 1987 and its transition temperature is above the liquid nitrogen temperature.
📊
Key Findings & Data:However, in the presented work, Y123 was prepared by the same technique using a sintering ambient composed of a mixture of oxygen and argon gases for the rst time.
💡
Conclusion & Impact:It was also observed that the sample sintered in the 50% oxygen and 50% argon atmosphere showed the highest critical current density
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

YBa 2 Cu 3 O 7 (Y123) is a superconductor material discovered in 1987 and its transition temperature is above the liquid nitrogen temperature. It is known that superconductor samples produced by the solid-state reaction route are very often sintered in air atmosphere. However, in the presented work, Y123 was prepared by the same technique using a sintering ambient composed of a mixture of oxygen and argon gases for the rst time. Critical current densities of the samples were calculated using results of magnetization measurements. It was obtained from magnetization analysis that all the samples exhibited superconductor character. It was also observed that the sample sintered in the 50% oxygen and 50% argon atmosphere showed the highest critical current density

🔖

Cite This Article

BAŞOĞLU, M. (2022). The effect of sintering in different atmospheres on superconductivity parameters of YBCO. Turkish Journal of Physics, Cilt: 41 - Sayı: 2, 91–94. https://ajindex.com/articles/614016

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Hirsch, J. E.; Maple, M. B.; Marsiglio, F. Physica C 2015, 514, 1-8
  2. Wu, M. K.; Ashburn, J. R.; Torng, C. J.; Hor, P. H.; Meng, R. L.; Gao, L.; Huang, Z. J.; Wang, Y.Q.; Chu, C.W. Phys. Rev. Lett. 1987, 58, 908-910
  3. Marsh, P.; Fleming, R. M.; Mandich, M. L.; DeSantolo, A. M.; Kwo, J.; Hong, M.; Martinez-Miranda, L. J. Nature 1988, 334, 660-662
  4. Marsh, P.; Fleming, R. M.; Mandich, M. L.; Desantolo, A. M.; Kwo, J.; Hong, M.; Martinezmiranda, L. J. Nature 1988, 334, 141-143
  5. Karpinski, J.; Rusiecki, S.; Bucher, B.; Kaldis, E.; Jilek, E. Physica C 1989, 161, 618-625
  6. Genoud, J. Y.; Graf, T.; Triscone, G.; Junod, A.; Muller, J. Physica C 1992, 192, 137-146
  7. Maeda, H.; Tanaka, Y.; Fukutomi, M.; Asono, T. Jpn. J. Appl. Phys. 1988, 27, L209-L210
  8. Pathak, L. C.; Mishra, S. K.; Das, S. K.; Bhattacharya, D.; Chopra, K. L. Physica C 2001, 351, 295-300
  9. Antal, V.; Zmorayova, K.; Kovac, J.; Kavecansky, V.; Diko, P.; Eisterer, M.; Weber, H. W. Supercond. Sci. Tech. 2010, 23, 065014
  10. Basoglu, M.; Duzgun, _ I. J. Supercond. Nov. Magn. 2016, 29, 1737-1740