Journals / Turkish Journal of Physics / 2018 / Cilt: 42 - Sayı: 3

Structural and permeability characterization of Zn-Li ferrites

Pages
265–272
Publication Date
2022-11-05
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was also observed that increase of the real part of permeability was accompanied by decrease of resonancefrequency $(f_r)$ , which confirms the Snoek relation for polycrystalline ferrites.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Structural characterization and magnetic properties of Zn-substituted Li ferrites with composition$Zn_x;Li_{0.45-x/2}Fe_{2.55-x/2};O_4$ (where x = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5) were studied by varying sintering temperature T S (where T S = 1000, 1050, 1100, 1150, 1200, and 1250 ◦ C) of the six samples.
📊
Key Findings & Data:The single-phase cubic spinelstructure was found by XRD patterns and scanning electron microscopy revealed the microstructure of all the samples.Permeability (real, $µ'_i$ and imaginary, $µ''_i$ ) was found to increase with Zn substitution and also with sintering temperature.
💡
Conclusion & Impact:It was also observed that increase of the real part of permeability was accompanied by decrease of resonancefrequency $(f_r)$ , which confirms the Snoek relation for polycrystalline ferrites.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Structural characterization and magnetic properties of Zn-substituted Li ferrites with composition$Zn_x;Li_{0.45-x/2}Fe_{2.55-x/2};O_4$ (where x = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5) were studied by varying sintering temperature T S (where T S = 1000, 1050, 1100, 1150, 1200, and 1250 ◦ C) of the six samples. The single-phase cubic spinelstructure was found by XRD patterns and scanning electron microscopy revealed the microstructure of all the samples.Permeability (real, $µ'_i$ and imaginary, $µ''_i$ ) was found to increase with Zn substitution and also with sintering temperature. The real part of initial permeability ($µ'_i$) was found to depend on the density and average grain sizes of thesamples. It was also observed that increase of the real part of permeability was accompanied by decrease of resonancefrequency $(f_r)$ , which confirms the Snoek relation for polycrystalline ferrites.

🔖

Cite This Article

CHOUDHURY, S., AHMED, M. H. M., HOSSAIN, A. K. M. A. (2022). Structural and permeability characterization of Zn-Li ferrites. Turkish Journal of Physics, Cilt: 42 - Sayı: 3, 265–272. https://ajindex.com/articles/613989

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (26)

  1. Hankare, P. P.; Patil, R. P.; Sankpal, U. B.; Garadkar, K. M.; Sasikala, R.; Tripathi, A. K.; Mulla, L. S. J. Magn. Magn. Mater. 2010, 322, 2629-2633
  2. Popplewell, J.; Sakhnini, L. J. Magn. Magn. Mater. 1995, 149, 72-78
  3. Molday, R. S.; Makenzie, D. J. Immunol. Methods 1982, 52, 353-367
  4. Bulte, J. M. W.; Douglas, T.; Mann, S.; Frankel, R. B.; Moskowitz, B. M.; Brooks, R. A.; Baumgarner, C. D.; Vymazal, J.; Strub, M. P.; Frank, J. A. J. Magn. Reson. Imaging 1994, 4, 497-505
  5. Jung, C. W.; Jacobs, P. J. Magn. Reson. Imaging 1995, 13, 661-674
  6. Gopal Reddy, C. V.; Manorama, S. V.; Rao, V. J. J. Mater. Sci. Lett. 2000, 19, 775-778
  7. Dahn, J. R.; Vom Sacken, U.; Michal, C. A. Solid State Ionics 1990, 44, 87-97
  8. An, S. Y.; Shim, I. B.; Kim, C. S. J. Magn. Magn. Mater. 2005, 290, 1551-1554
  9. Patton, C. E.; Blankenbeckler, D. L.; Brower, C. J.; Dalton, B. B.; Lucero, A. M. IEEE T. Magn. 1981, 17, 2976-2978
  10. Brower, C. J.; Patton, C. E. J. Appl. Phys. 1982, 53, 2104-2106
  11. Jadav, S. A. J. Magn. Magn. Mater. 2001, 224, 167-172
  12. Bellad, S. S.; Watawe, S. C.; Shaikh, A. M.; Chougule, B. K. Bull. Mater. Sci. 2000, 23, 83-85
  13. Ahmed, M. H. M.; Choudhury, S.; Hossain, A. K. M. A. European Scientific Journal 2014, 3, 456-462
  14. Islam, S.; Maria, K. H.; Choudhury, S.; Hakim, M. A.; Saha, D. K. Turk J Phys. 2012, 36, 253-259
  15. Rumy, S. M. U.; Bhuiyan, M. A.; Ahmed, M. H. M.; Maria, K. H.; Hakim, M. A.; Saha, D. K.; Choudhury, S. Journal of Bangladesh Academy of Sciences 2014, 38, 7-18
  16. Mendelson, M. I. J. Am. Ceram. Soc. 1969, 52, 443-446
  17. Hossain, A. K. M. A.; Mahmud, S. T.; Seki, M.; Kawai, T.; Tabata, H. J. Magn. Magn. Mater. 2007, 312, 210-219
  18. Brockman, F. G.; Dowling, P. H.; Steneck, W. G. Phys. Rev. 1950, 77, 85-93
  19. Akther, S.; Hakim, M. A. Mater. Chem. Phys. 2010, 120, 399-403
  20. Nelson, J. B.; Riley, D. P. Proc. Phys. Soc. Lond. 1945, 57, 160-177
  21. Saikh, A. M.; Walawe, S. C.; Jadav, S. A.; Chougule, B. K. Material Research Bulletin 2002, 37, 2547-2555
  22. Goldmen, A. Handbook of Modern Ferrites Technology, 2nd ed.; Springer Publications: Pittsburgh, PA, USA, 1990
  23. Ajmal, A.; Maqsood, M. Mater. Sci. Eng. B 2007, 139, 164-170
  24. Hossain, A. K. M. A.; Chowdhury, M. M. A.; Vilquin, B.; Tanaka, H. Mater. Chem. Phys. 2012, 133, 941-945
  25. Patil, R. S.; Kakatkar, S. V.; Patil, S. A.; Sankpal, A. M.; Sawant, S. R. Mater. Chem. Phys. 1991, 28, 355-365
  26. Haque, M. M.; Maria, K