SavedAdd your journal

Journals / Turkish Journal of Engineering / 2021 / Cilt: 5 - Sayı: 2

WIND POWER PLANT LAYOUT OPTIMIZATION USING PARTICLE SWARM OPTIMIZATION

Mustafa ŞEKKELİ
Ceyhun YILDIZ
İbrahim Çelik
Pages
95–101
Publication Date
2022-11-02
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, it was seen that wind turbines were located to the high wind velocity regions with the solution of the developed optimization model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The use of wind energy has rapidly increased in recent years.
📊
Key Findings & Data:In parallel with this rapid increase, Wind Power Plant (WPP) installation has become an important research topic.
💡
Conclusion & Impact:In addition, it was seen that wind turbines were located to the high wind velocity regions with the solution of the developed optimization model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The use of wind energy has rapidly increased in recent years. In parallel with this rapid increase, Wind Power Plant (WPP) installation has become an important research topic. The selection of wind turbine location in WPP installation effects turbine output power. If the appropriate turbine position is not selected, the total generation of WPP is decreased. The purpose of this study was to determine the locations that wind turbines can achieve the highest energy generation. In this study, an optimization model was proposed to achieve the best WPP layout. In the first stage, field data and Wind Atlas Analysis and Application Program (WAsP) software were used to obtain wind speed distributions in the region where the WPP will be installed. . These distributions were used in the developed optimization model in MATLAB. The actual power curve of a wind turbine was used in the model to calculate energy generation. In the second stage, the locations of the wind turbine were determined by particle swarm optimization (PSO) method. In the final stage, the results of developed MATLAB model were compared with WASP to check accuracy. The difference between MATLAB model and WAsP software was found as 0.04%. This result showed that this model performed a calculation with acceptable accuracy. In addition, it was seen that wind turbines were located to the high wind velocity regions with the solution of the developed optimization model.

🔖

Cite This Article

ŞEKKELİ, M., YILDIZ, C., Çelik, İ. (2022). WIND POWER PLANT LAYOUT OPTIMIZATION USING PARTICLE SWARM OPTIMIZATION. Turkish Journal of Engineering, Cilt: 5 - Sayı: 2, 95–101. https://ajindex.com/articles/605489

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Abdelsalam, A.M., El-Shorbagy, M.A. (2018). “Optimization of wind turbines siting in a wind farm using genetic algorithm based local search”, Renewable Energy, Vol. 123, pp. 748-755.
  2. Brusca, S., Lanzafame, R., Messina, M. (2014). “Wind turbine placement optimization by means of the Monte Carlo simulation method”. Modelling and Simulation in Engineering, Vol. 2014, pp. 1-8.
  3. Celik, I., Yildiz, C. and Sekkeli,M. (2018) “An optimization model for wind turbine micro-siting in Wind Power Plant installation”, Gazi University Science Journal: PART:C, Vol. 6, No 4, pp. 898-908.
  4. Celik, I., Yildiz, C. and Sekkeli,M. (2019) “Deniz üstü Rüzgâr Enerji Santrallerinde Rüzgâr Türbini Çıkış Gücü Hesabında Temel İz Etkisinin Değerlendirilmesi için Bir Model”, The Black Sea Journal of Science, Vol. 1, pp. 1- 9. Changshui, Z., Guangdong, H., Jun, W., “A fast algorithm based on the sub- modular property for optimization of wind turbine positioning”, Renewable Energy, Vol. 36, pp. 2951-2958, 2011.
  5. Chen, Y., Li, H., Jin, K., Song, Q. (2013). “Wind farm layout optimization using genetic algorithm with different hub height wind turbines”, Energy Conversation Management, Vol. 70, pp. 56-65.
  6. Chen, Y., Li, H., He, B., Wang, P. (2015). “Multiobjective genetic algorithm based innovative wind farm layout optimization method.”, Energy Conversation Management, Vol. 105, pp. 1318-1327.
  7. Chen K, Song MX, Zhang X, Wang SF. (2016). “Wind turbine layout optimization with multiple hub height wind turbines using greedy algorithm”, Renewable Energy, 96(676–686), (2016).
  8. Emami, A., Noghreh, P. (2010). “New approach on optimization in placement of wind turbines within wind farm by genetic algorithms”. Renewable Energy, Vol. 35, pp. 1559–64.
  9. Engelbrecht, A.P. (2005). Fundamentals of Computational Swarm Intelligence, John Wiley & Sons, United Kingdom. Feng, J., Shen, W.Z. (2015). “Solving the wind farm layout optimization problem using random search algorithm”, Renewable Energy, Vol. 78, pp. 182–192.
  10. Gao, X., Yang, H., Lin, L. Koo, P. (2015). “Wind turbine layout optimization using multi- population genetic algorithm and a case study in Hong Kong offshore”, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 139, pp. 89-99.
  11. Garcia E., Gonzalez Rouco J.F., Jimenez P.A. (2009). “A comparison of methodologies for monthly wind energy estimation”, Wind Energy, Vol.12, pp. 640–659. González, J.S., Rodriguez, A. G., Mora, J. C., Santos, J. R., Payan, M. B. (2011). “Overall design optimization of win