Journals / Turkish Journal of Engineering / 2021 / Cilt: 5 - Sayı: 4

Investigation of high temperature effects in different mineral additive light mortars

Pages
165–170
Publication Date
2022-11-02
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

With the use of mineral additives, it was observed that both the weight losses and the losses in flexural and compressive strengths decreased and the mortars became more resistant to temperature.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, physical and mechanical properties of light mortars produced with Fly Ash (FA) contributed pumice aggregates, Colemanite (K), Blast Furnace Slag (BFS), Marble powder (MP) were investigated under high temperature.
📊
Key Findings & Data:Mortar samples were produced in the dimensions of 40x40x160 mm.
💡
Conclusion & Impact:With the use of mineral additives, it was observed that both the weight losses and the losses in flexural and compressive strengths decreased and the mortars became more resistant to temperature.
🔬Design:Lab & Field Experiment
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, physical and mechanical properties of light mortars produced with Fly Ash (FA) contributed pumice aggregates, Colemanite (K), Blast Furnace Slag (BFS), Marble powder (MP) were investigated under high temperature. Mortar samples were produced in the dimensions of 40x40x160 mm. At the preparation of mortars, pumice (0-4mm) as a fine aggregate and CEM I 42.5R Portland Cement were replaced with. 1%, 2% and 3% by weight of K respectively and 10%, 20% and 30% of YFC, MT and UK were replaced with cement in light mortars mixture. The produced mortar samples were removed from the mold after 24-hour setting and subjected to a cure at a temperature of 20±2°C in the standard cure pool for 28 days. The flexural and compressive strength of the mortar samples filling the 7th day were determined. Physical properties such as water absorption, porosity and unit volume weight of 28 days cured mortars were determined and flexural and compressive strengths were calculated. At the end of 28th day samples, which were reached its final strength, were exposed to 200 ⁰C, 400 ⁰C, 600 ⁰C and 800 ⁰C heats in High Temperature Oven. It is observed that with increasing temperature, weight loss increases, flexural and compressive strengths decrease in all samples. With the use of mineral additives, it was observed that both the weight losses and the losses in flexural and compressive strengths decreased and the mortars became more resistant to temperature.

🔖

Cite This Article

DÜNDAR, B., ÇINAR, E. (2022). Investigation of high temperature effects in different mineral additive light mortars. Turkish Journal of Engineering, Cilt: 5 - Sayı: 4, 165–170. https://ajindex.com/articles/605481

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Akca A H & Özyurt N (2018). Effects of re-curing on microstructure of concrete after high temperature exposure. Construction and Building Materials, 168, 431-441. DOI: 10.1016/j.conbuildmat.2018.02.122 Andrew R M (2018). Global CO2 emissions from cement production. Earth System Science Data, 10(1), 195- 217. DOI: 10.5194/essd-10-195-2018
  2. Arioz O (2007). Effects of elevated temperatures on properties of concrete. Fire Safety Journal, 42(8), 516-522. DOI: 10.1016/j.firesaf.2007.01.003 Aydın S & Baradan B (2007). Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars. Cement and Concrete Research, 37(6), 988-995. DOI: 10.1016/j.cemconres.2007.02.005 Dimitriou G, Savva P & Petrou M F (2018). Enhancing mechanical and durability properties of recycled aggregate concrete. Construction and Building Materials, 158, 228-235. DOI: 10.1016/j.conbuildmat.2017.09.137 Gawin D, Pesavento F & Schrefler A (2004). Modelling of deformations of high strength concrete at elevated temperatures. Materials and Structures, 37, 218- 236. Heikal M, El-Didamony H, Sokkary T M & Ahmed I A (2013). Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature. Construction and Building Materials, 38, 1180-1190. DOI: 10.1016/j.conbuildmat.2012.09.069 Huseien G F, Sam A R M, Shah K W, Mirza J & Tahir M M (2019). Evaluation of alkaliactivated mortars containing high volume waste ceramic powder and fly ash replacing GBFS. Construction and Building Materials, 210, 78-92. DOI: 10.1016/j.conbuildmat.2019.03.194 Juan-Valdés A, Rodríguez-Robles D, García-González J, Guerra-Romero M I, Morán-del Pozo J M (2018). Mechanical and microstructural characterization of nonstructural precast concrete made with recycled mixed ceramic aggregates from construction and demolition wastes. Journal of Cleaner Production, 180, 482-493. DOI: 10.1016/j.jclepro.2018.01.191 Kermeli K, Edelenbosch O Y, Crijns-Graus W, Van Ruijven B J, Mima S, Van Vuuren D P & Worrell E (2019). The scope for better industry representation in longterm energy models: modeling the cement industry. Applied Energy, 240, 964-985. DOI: 10.1016/j.apenergy.2019.01.252 Khaliq W & Khan H A (2015). High temperature material properties of calcium aluminate cement concrete. Construction and Building Materials, 94, 475-487. DOI: 10.1016/j.conbuildmat.2015.07.023 Khoury G A (1996). Performance of Heated ConcreteMechanical Properties. Contract NUC/56/3604A with Nuclear Installa