Journals / Turkish Journal of Chemistry / 2000 / Cilt: 24 - Sayı: 2

Effect of Non-ionic Reagent Adsorption on Zeta Potential of Fine Coal Particles

Pages
117–129
Publication Date
2022-11-04
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was concluded that the pH of coal particles in slurry is a principle parameter controlling the value of zeta potentials.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The -5 mm size fractions of two low rank British coals were used in zeta potential measurements.
📊
Key Findings & Data:The non-ionic reagents used for the adsorption tests were of diacetone alcohol and 2-ethyl hexanol.
💡
Conclusion & Impact:It was concluded that the pH of coal particles in slurry is a principle parameter controlling the value of zeta potentials.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:zeta potential · non-ionic reagents · coal.

Abstract

The -5 mm size fractions of two low rank British coals were used in zeta potential measurements. The electrophoretic behaviour was described by the Helmholtz-Smoluchowski equation. The non-ionic reagents used for the adsorption tests were of diacetone alcohol and 2-ethyl hexanol. Zeta potentials of both coals at various pHs were significantly different in the absence of the non-ionic reagents. Negligible variations were observed on the zeta potential curves of both coal particles in the presence of the non-ionic reagents used. It was concluded that the pH of coal particles in slurry is a principle parameter controlling the value of zeta potentials. As the zeta potential for Bickershaw coal particles was zero at about pH 5, the point of zero zeta potential was not observed for Rawdon coal particles. This is attributed to the functionality and the extent of oxidation of the coal surface.

Özet

The -5 mm size fractions of two low rank British coals were used in zeta potential measurements. The electrophoretic behaviour was described by the Helmholtz-Smoluchowski equation. The non-ionic reagents used for the adsorption tests were of diacetone alcohol and 2-ethyl hexanol. Zeta potentials of both coals at various pHs were significantly different in the absence of the non-ionic reagents. Negligible variations were observed on the zeta potential curves of both coal particles in the presence of the non-ionic reagents used. It was concluded that the pH of coal particles in slurry is a principle parameter controlling the value of zeta potentials. As the zeta potential for Bickershaw coal particles was zero at about pH 5, the point of zero zeta potential was not observed for Rawdon coal particles. This is attributed to the functionality and the extent of oxidation of the coal surface.

🔖

Cite This Article

AKTAŞ, Z. (2022). Effect of Non-ionic Reagent Adsorption on Zeta Potential of Fine Coal Particles. Turkish Journal of Chemistry, Cilt: 24 - Sayı: 2, 117–129. https://ajindex.com/articles/602440

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...