Journals / Turkish Journal of Chemistry / 2002 / Cilt: 26 - Sayı: 3

Chemical exfoliation characteristics of Karakoç phlogopide in hydrogen peroxide solution

Pages
431–439
Publication Date
2022-11-05
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The experimental results were interpreted mathematically and a regression model was proposed to calculate the swelling ratio for any hydrogen peroxide concentration and reaction time at room temperature.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The chemical exfoliation characteristics of phlogopite samples taken from Sivas -Yıldızeli-Karakoç (Turkey) ore were investigated. $H_2SO_4$, HCl, $HNO_3$, $H_3PO_4$ and $H_2O_2$ solutions at varying concentrations were tested for chemical exfoliation and the best reagent for this purpose was determined to be hydrogen peroxide.
📊
Key Findings & Data:The exfoliation characteristics of the material increased with increases in hydrogen peroxide concentration and depending on the reaction time (1-30 hours) a maximum value of a 49-fold increase in swelling was obtained in 30% hydrogen peroxide solution at room temperature with a change of the density from 2.75 g/$cm^3$ to 0.37 g/$cm^3$.
💡
Conclusion & Impact:The experimental results were interpreted mathematically and a regression model was proposed to calculate the swelling ratio for any hydrogen peroxide concentration and reaction time at room temperature.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The chemical exfoliation characteristics of phlogopite samples taken from Sivas -Yıldızeli-Karakoç (Turkey) ore were investigated. $H_2SO_4$, HCl, $HNO_3$, $H_3PO_4$ and $H_2O_2$ solutions at varying concentrations were tested for chemical exfoliation and the best reagent for this purpose was determined to be hydrogen peroxide. In the exfoliation tests performed, hydrogen peroxide concentration, temperature and reaction time were observed to be important parameters, with solid/liquid ratio being of minor importance. The exfoliation characteristics of the material increased with increases in hydrogen peroxide concentration and depending on the reaction time (1-30 hours) a maximum value of a 49-fold increase in swelling was obtained in 30% hydrogen peroxide solution at room temperature with a change of the density from 2.75 g/$cm^3$ to 0.37 g/$cm^3$. Although maximum swelling was reached in 30 hours at room temperature in 30% hydrogen peroxide solution, the reaction time was lowered to 70 minutes by an increase in temperature to 60°C. Above 60°C the material started to decompose into fine particles, with complete loss of its characteristics above 80°C. The experimental results were interpreted mathematically and a regression model was proposed to calculate the swelling ratio for any hydrogen peroxide concentration and reaction time at room temperature.

🔖

Cite This Article

ÜÇGÜL, E., GİRGİN, İ. (2022). Chemical exfoliation characteristics of Karakoç phlogopide in hydrogen peroxide solution. Turkish Journal of Chemistry, Cilt: 26 - Sayı: 3, 431–439. https://ajindex.com/articles/602343

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (19)

  1. A.C.D. Newman (ed.), "Chemistry of Clays and Clay Minerals", Mineralogical Society, London, 1987
  2. A.C. Meisinger, "Vermiculite" in Mineral Facts and Problems, Vol 1, pp. 917-922, US Bureau of Mines, 1985
  3. H.N. McCarl, "Construction Materials" in Industrial Minerals and Rocks, ed. S.J. Lefond, pp. 81-91, AIME,1983
  4. J.R. Hindman, "Vermiculite" in Industrial Minerals and Rocks, ed. D.D. Carr, pp. 1103-1111, SME, 1994
  5. J.B. Myers, "Vermiculite" in Industrial Minerals and Rocks, pp. 889-895, AIME, 1963
  6. A. Justo, C. Maqueda, J.L. Perez-Rodriquez and E. Marillo, Appl. Clay Sci. 4, 509 (1989)
  7. A. Justo, J.L. Perez-Rodriquez, P.S. Sanchez-Soto, Journal of Thermal Analysis. 40, 59-65 (1993)
  8. K. Motoharu and T. Katsutoshi, Clay and Clay Minerals. 39 (2), 174-183, (1991)
  9. E. Üçgül, İ. Girgin, "Determination of Thermal Exfoliation Characteristics of Phlogopite", in 3rd.Industrial Raw Materials Symposium, eds. H. Köse, V. Arslan, M. Tanrıverdi, pp. 208-216, October 14-15,İzmir, 1999 (in Turkish)
  10. H. Suquet, S. Chevalier, C. Marcilly, D. Barthomeuf, Clay Minerals. 26, 49-60 (1991)
  11. A. Kh. Mamina, E.N. Kotel'nikova, V.A. Muromtsev, Inorganic Materials. 26, 2104-2107 (1990)
  12. V.A. Muromtsev, N.M. Zolotukhina, A. Kh. Mamina, Inorganic Materials. 26, 868-871 (1990)
  13. E. Üçgül, "Thermal and chemical exfoliation characteristics of Sivas-Yıldızeli-Karakoç Phlogopite Ore", MSc Thesis, Hacettepe University, Ankara, Turkey, 1997 (in Turkish)
  14. TS 3681, "Expanded perlite aggregate", Turkish Standards Institute, 7 p., 1982 (in Turkish)
  15. G.P. Chapman, "Mica", in Industrial Minerals and Rocks, Vol. 2, ed. S.J. Lefond, pp. 915-929, AIME, 1983
  16. D.C. Bain and B.F.L. Smith, "Chemical Analysis" in Clay Mineralogy: Spectroscopic and Chemical Determinative Methods, ed. M.J. Wilson, pp. 300-332, Chapman & Hall, 1994
  17. M. R. Spiegel, "Schaum's Outline of Theory and Problems of Statistics", McGraw-Hill, 1961
  18. R.E. Walpole and R.H. Myers, "Probability and Statistics for Engineers and Scientists", Macmillan Publ. Comp., New York, 1989
  19. F.A. Cotton and G. Wilkinson, "Advanced Inorganic Chemistry", Interscience Publishers, New York,1966.