Journals / Turkish Journal of Chemistry / 2020 / Cilt: 44 - Sayı: 3

Box–Behnken design for removal of uranium(VI) from aqueous solution using poly(ethylene glycol) based dicationic ionic liquid impregnated chitosan

Pages
756–774
Publication Date
2022-11-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Sorption kinetics followed a pseudo-second-order model and Freundlich model was obtained to fit the sorption data.The presence of competing ions slightly reduced uranium(VI) sorption and the selectivity order can be given as $UO_2^{2+}$ >$Zn^{2+}$ >$Ni{2+}$ .

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Poly(ethylene glycol) bis(methylimidazolium) di[bis(trifluoromethylsulfonyl)imide] was synthesized as an ionicliquid and impregnated onto chitosan.
📊
Key Findings & Data:Response surface methodology based on 3 level Box–Behnken design was applied to analyze the effect of initial pH (4–6), initial concentration (20–60 mg $L^{-1}$), contact time(15–105 min), and temperature (30–50 °C) on the uptake capacity of uranium(VI).
💡
Conclusion & Impact:Sorption kinetics followed a pseudo-second-order model and Freundlich model was obtained to fit the sorption data.The presence of competing ions slightly reduced uranium(VI) sorption and the selectivity order can be given as $UO_2^{2+}$ >$Zn^{2+}$ >$Ni{2+}$ .
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Poly(ethylene glycol) bis(methylimidazolium) di[bis(trifluoromethylsulfonyl)imide] was synthesized as an ionicliquid and impregnated onto chitosan. The removal of uranium(VI) ions from aqueous solution was investigated withbatch sorption tests using ionic liquid impregnated chitosan. Response surface methodology based on 3 level Box–Behnken design was applied to analyze the effect of initial pH (4–6), initial concentration (20–60 mg $L^{-1}$), contact time(15–105 min), and temperature (30–50 °C) on the uptake capacity of uranium(VI). Main effect of initial concentration,quadratic effect of contact time, and dual effect of initial pH and contact time were found statistically significant basedon analysis of variance (ANOVA). Probability F-value (F = 1.49 ×$10^{-6}$) and correlation coefficient ($R^{2}$ = 0.96) pointout that the proposed model is compatible with experimental data. The maximum uptake capacity of uranium(VI) wasfound as 28.48 mg $g^{-1}$at initial pH 4, initial concentration 60 mg $L^{-1}$, contact time of 70 min, and a temperature of 50°C. Sorption kinetics followed a pseudo-second-order model and Freundlich model was obtained to fit the sorption data.The presence of competing ions slightly reduced uranium(VI) sorption and the selectivity order can be given as $UO_2^{2+}$ >$Zn^{2+}$ >$Ni{2+}$ .

🔖

Cite This Article

İNAN, S., MUMCU, T., BOZKURT, S. S. (2022). Box–Behnken design for removal of uranium(VI) from aqueous solution using poly(ethylene glycol) based dicationic ionic liquid impregnated chitosan. Turkish Journal of Chemistry, Cilt: 44 - Sayı: 3, 756–774. https://ajindex.com/articles/601603

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Xiao-teng Z, Dong-mei J, Yi-qun X, Jun-chang C, Shuai H et al. Adsorption of uranium(VI) from aqueous solution by modified Rice Stem. Journal of Chemistry 2019
  2. doi: 10.1155/2019/6409504 2. Zhang L, Zhang X, Lu Q, Wu X, Jiang T et al. Adsorption of U(VI) ions from aqueous solution using nanogoethite powder. Adsorption Science & Technology 2019
  3. 37 (1-2): 113-126. doi: 10.1177/0263617418816202 3. Phillips DH, Gu B, Watson DB, Parmele CS. Uranium removal from contaminated groundwater by synthetic resins. Water Research 2008
  4. doi: 10.1016/j.watres.2007.07.010 4. Chen S, Hong J, Yang H, Yang J. Adsorption of uranium (VI) from aqueous solution using a novel graphene oxide-activated carbon felt composite. Journal of Environmental Radioactivity 2013
  5. doi: 10.1016/j.jenvrad.2013.09.002 5. Kim K-W, Kim Y-H, Lee S-Y, Lee J-W, Joe K-S et al. Precipitation characteristics of uranyl ions at different pHs depending on the presence of carbonate ions and hydrogen peroxide. Environmental Science and Technology 2009
  6. 43 (7): 2355-2361. doi: 10.1021/es802951b 6. Kumar JR, Kim J-S, Lee J-Y, Yoon H-S. A brief review on solvent extraction of uranium from acidic solutions. Separation & Purification Reviews 2011
  7. 40 (2): 77-125. doi: 10.1080/15422119.2010.549760 7. Anderson L, Armstrong DW, Wei GT. Ionic liquids in analytical chemistry. Analytical Chemistry 2006
  8. 78 (9): 2892-2902. doi: 10.1021/ac069394o 8. Nakashima K, Kubota F, Maruyama T, Goto M. Ionic liquids as a novel solvent for lanthanide extraction. Analytical Sciences 2003
  9. doi: 10.2116/analsci.19.1097 9. Lupa L, Voda R, Popa A. Adsorption behavior of cesium and strontium onto chitosan impregnated with ionic liquid. Separation Science and Technology 2018
  10. 53 (7): 1107-1115. doi: 10.1080/01496395.2017.1313274 10. Chen J. Application of Ionic Liquids on Rare Earth Green Separation and Utilization. Berlin, Germany: Springer, 2016. doi: 10.1007/978-3-662-47510-2 11. Fontanals N, Borrull F, Marce RM. Ionic liquids in solid-phase extraction. Trac-Trends in Analytical Chemistry 2012
  11. doi: 10.1016/j.trac.2012.08.010 12. Yusuf NYM, Masdar MS, Isahak WNRW, Nordin D, Husaini T et al. Impregnated carboneionic liquid as innovative adsorbent for H2 /CO2 separation from biohydrogen. International Journal of Hydrogen Energy 2019
  12. doi: 10.1016/j.ijhydene.2018.06.155. 13. Gallardo V, Navarro R, Saucedo I, Avila M, Guibal E. Zinc(II) Extraction from hydroc