Tunay M (2006). The assessment of environmentally sensitive forest Yamashina H, Ito T, Kawada H (2002). Innovative product road construction in calabrian pine forest areas of Turkey. J development process by integrating QFD and TRIZ. Int J Prod Environ Biol 27: 529–535. Res 40: 1031–1050. Whitney D
It was found that creeping exerted a significant impact on the mechanical quality of the examined joints by reducing their substitute modulus of elasticity by 11%– 16%.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:The study presents research results on the effect of creeping on changes in the rigidity of selected joints used in constructions of upholstered furniture, expressed as the substitute modulus of elasticity Ez.
📊
Key Findings & Data:It was found that creeping exerted a significant impact on the mechanical quality of the examined joints by reducing their substitute modulus of elasticity by 11%– 16%.
💡
Conclusion & Impact:This modulus can be employed in numerical calculations using the finite elements method.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
The study presents research results on the effect of creeping on changes in the rigidity of selected joints used in constructions of upholstered furniture, expressed as the substitute modulus of elasticity Ez. The modulus was calculated analytically for this purpose using the Maxwell–Mohr constitutive equation. In addition, actual runs of creeping curves were determined and a theoretical model well describing the obtained results was selected. Simultaneously, a detailed statistical analysis was carried out. It was found that creeping exerted a significant impact on the mechanical quality of the examined joints by reducing their substitute modulus of elasticity by 11%– 16%. This modulus can be employed in numerical calculations using the finite elements method.
🔖
Cite This Article
KLOS, R., FABISIAK, B., SMARDZEWSKI, J. (2022). Tunay M (2006). The assessment of environmentally sensitive forest Yamashina H, Ito T, Kawada H (2002). Innovative product road construction in calabrian pine forest areas of Turkey. J development process by integrating QFD and TRIZ. Int J Prod Environ Biol 27: 529–535. Res 40: 1031–1050. Whitney D. Turkish Journal of Agriculture and Forestry, Cilt: 37 - Sayı: 6, 802–811. https://ajindex.com/articles/599507
Albin R (1989) Durchbiegung und Lastannahmen im Korpusmöbelbau. Holz als Roh-und Werkstoff 47: 7–10 (in German with English abstract). Altinok M, Taş HH, Sancak E (2009) Load carrying capacity of spline joints as affected by board and adhesives type. Sci Res Essays 4: 479–483. Atar M, Özçifçi A (2008) The effect of screw and back panels on the strength of corner joints in case furniture. Mater Des 29: 519–525. Bao Z, Eckelman C (1995) Fatigue life and design stresses for wood composites used in furniture. For Prod J 45: 59–63. Cai Z, Fridley K, Hunt MO, Rosowsky DV (2002) Creep and creep recovery models for wood under high stress levels. Wood Fiber Sci 34: 12–21. Czachor G (2009) Modelowanie przebiegu pełzania drewna buka. Weryfikacja przydatności modeli reologicznych. Acta Agrophysica 13: 615–626 (in Polish with English abstract). Czachor G (2010) Modele relaksacji naprężeń w płytach pilśniowych zawierających komponent słomy. Inżynieria Rolnicza 1: 105– 113 (in Polish with English abstract). Denizli-Tankut N, Tankut A, Eckelman C, Gibson H (2003) Improving the deflection characteristics of shelves and side walls in panel-based cabinet furniture. For Prod J 53: 56–64. Dietrich L (1994) Proces i parametry uszkodzeń materiałów konstrukcyjnych. Prace IPPT 26: 223–233 (in Polish). Gonet B (1991) Reologiczne właściwości drewna. Przemysł Drzewny 3: 3–5 (in Polish). Gressel P (1972) Zeitstandbiegeverhalten von Holzwerkstoffen in Abhängigkeit von Klima und Belastung
Mitteilung: Bisherige Untersuchungen, Versuchsplan. Versuchdurchführung. Holz als Roh- und Werkstoff 30: 259–266
Mehrergebnisse in Abhängigkeit von den untersuchten Kriech- Parametern. Holz als Roh- und Werkstoff 30: 347–355
Diskussion der Versuchsergebnisse. Holz als Roh- und Werkstoff 30: 479–488 (in German). Güntekin E (2005) Montaja hazir mobilya birleştirmelerinin rotasyonal sünme özellikleri ve modellenmesi. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi A 1: 153–162 (in Turkish with English abstract). Jivkov V, Yordanov Y, Marinova A (2010) Improving by reinforcement the deflection of shelves made of particle board and MDF. In: Conference Proceedings on Processing Technologies for the Forest and Biobased Product Industries, Salzburg Univ Appl Sci, pp. 205–208. Kłos R (2010) Carrying capacity and creep of the “konfirmat” type wall angle joints in a sustained static load test. Ann Warsaw Univ Life Sci – SGGW; For Wood Technol 70: 154–160. Kratz W (1969) Untersuchungen Fiber das