Journals / Turkish Journal of Agriculture and Forestry / 2021 / Cilt: 45 - Sayı: 4

Selected properties of briquettes made from blends of bamboo and beech biomass

Pages
389–401
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Based on the results of the present study, it was concluded that the bamboo wood biomass could be efficiently used in the production of lignocellulosic briquettes, regardless if individual or in combination with beech wood biomass.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study reported the experimental analysis on wood briquettes manufactured from Moso bamboo (Phyllostachys pubescens) and beech wood (Fagus sylvatica), regarded as an economically valuable fuel source.
📊
Key Findings & Data:This can be explained by the increase of the higher heating value of bamboo wood briquettes by 8.4% as compared to the beech wood briquettes.
💡
Conclusion & Impact:Based on the results of the present study, it was concluded that the bamboo wood biomass could be efficiently used in the production of lignocellulosic briquettes, regardless if individual or in combination with beech wood biomass.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study reported the experimental analysis on wood briquettes manufactured from Moso bamboo (Phyllostachys pubescens) and beech wood (Fagus sylvatica), regarded as an economically valuable fuel source. The following properties of briquettes: physical properties (density and moisture content); chemical properties (heating value, namely calorific value, and ash content); thermal properties (thermal conductivity and specific heat); and mechanical properties (breaking strength). These properties allowed the assessment of the efficiency of two species for using them in briquette manufacturing. The briquettes with higher fractions of bamboo wood showed enhanced characteristics as compared to the briquettes made of beech. This can be explained by the increase of the higher heating value of bamboo wood briquettes by 8.4% as compared to the beech wood briquettes. Similarly, bamboo briquettes had higher the breaking strength (2.1%) with respect to beech wood briquettes. The thermal conductivity of beech wood briquettes was 0.155 W/ mK while it was determined as 0.177 W/mK for bamboo wood briquettes. The average densities of beech wood and bamboo wood briquettes were 780.9 kg/m3 and 813.1 kg/m3 , respectively. The ash content difference between the bamboo wood briquettes and beech wood briquettes was minor. The advantage of using the bamboo wood in different mixture ratios with other wood species for briquettes manufacturing is that it is one of the fastest growing plants on the world as well as widespread around the world, predominantly in Asia. Based on the results of the present study, it was concluded that the bamboo wood biomass could be efficiently used in the production of lignocellulosic briquettes, regardless if individual or in combination with beech wood biomass.

🔖

Cite This Article

SPIRCHEZ, C., LUNGULEASA, A., AYRILMIŞ, N., SOVA, D. (2022). Selected properties of briquettes made from blends of bamboo and beech biomass. Turkish Journal of Agriculture and Forestry, Cilt: 45 - Sayı: 4, 389–401. https://ajindex.com/articles/599133

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. ASTM E1755 - 01 (2020). Standard test method for ash in biomass. West Conshohocken, PA, USA: ASTM International. Bodîrlău R, Teacă CA, Spiridon I (2008). Chemical modification of beech wood: effect on thermal stability. BioResources 3 (3): 789-800. doi: 10.15376/biores.3.3.789-800
  2. Chaney J (2010). Combustion characteristics of biomass briquettes. PhD dissertation, University of Nottingham, Nottingham, UK. Cheng J, Zhou F, Si T, Zhou J, Cen K (2018). Mechanical strength and combustion properties of biomass pellets prepared with coal tar residue as a binder. Fuel Processing Technology 179: 229- 237. doi: 10.1016/j.fuproc.2018.07.011 Derčan B, Lukić T, Bubalo-Živković M, Ðurđev B, Stojsavljević R et al. (2012). Possibility of efficient utilization of wood waste as a renewable energy resource in Serbia. Renewable and Sustainable Energy Reviews 16: 1516-1527. doi: 10.1016/j. rser.2011.10.017 Dodić SN, Zelenović Vasiljević T, Marić RM, Radukin Kosanović AJ, Dodić JM et al. (2012). Possibilities of application of waste wood biomass as an energy source in Vojvodina. Renewable and Sustainable Energy Reviews 16: 2355-2360. doi: 10.1016/j. rser.2012.01.079 EN ISO 17225-1 (2014). Solid biofuels - fuelspecificationsandclasses - Part 1: General requirements. Brussels, Belgium: European Committee for Standardization. Guo W, Lim CJ, Bi X, Sokhansanj S, Melin S (2013). Determination of effective thermal conductivity and specific heat capacity of wood pellets. Fuel 103: 347-355. doiː 10.1016/j.fuel.2012.08.037 Hytonen J, Nurmi J (2015). Heating value and ash content of intensively managed stands. Wood Research 60 (1): 71-82.
  3. Krajnc N (2015).
  4. Wood Fuel Handbook. Pristina, Republic of Kosovo: Food and Agriculture Organisation of the United Nations. Kumar R, Chandrashekar N (2014). Fuel properties and combustion characteristics of some promising bamboo species in India. Journal of Forestry Research 25 (2): 471- 476. doi:10.1007/ s11676-014-0478-6
  5. Liu Z, Fei B, Jiang Z, Liu X (2014). Combustion characteristics of bamboo-biochars. Bioresource Technology 167: 94-99. doi: 10.1016/j.biortech.2014.05.023 Liu Z, Fei B, Jiang Z, Cai Z, Yu Y et al. (2013). A comparative study of thermal properties of sinocalamusaffinis and moso bamboo. Journal of Thermal Analysis and Calorimetry 111: 393-399. doi: 10.1007/s10973-012-2266-x Liu Z, Jiang Z, Cai Z, Fei B, Yu Y et al. (2013). Effects of carbonization conditions on properties of bamboo pellets. Renewable Energy 51: 1-6. doi: 10.1016/j.ren