Journals / Tekstil ve Konfeksiyon / 2009 / Cilt: 19 - Sayı: 3

Ham ve geri dönüşüm polipropilen polimerlerinin karışımından elde edilen monofilamentler

Monofilaments produced by blending virgin with recycled polypropylene

Pages
181–188
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Because of the poor miscibility of the virgin with the recycled polypropylene, which also contained some fractions of polyethylene, the as-spun monofilaments were porous, brittle and rigid, and had a high tendency to break.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Our research addresses the use of 100% recycled polypropylene from separately collected packaging waste in Slovenia for the manufacture of monofilaments.
📊
Key Findings & Data:Monofilaments were spun from the pure virgin polymer, from a blend of 85% virgin and 15% recycled polymer, and from 50% virgin and 50% recycled polymer.
💡
Conclusion & Impact:Because of the poor miscibility of the virgin with the recycled polypropylene, which also contained some fractions of polyethylene, the as-spun monofilaments were porous, brittle and rigid, and had a high tendency to break.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Our research addresses the use of 100% recycled polypropylene from separately collected packaging waste in Slovenia for the manufacture of monofilaments. The goal of this research was to optimise the melt spinning of monofilaments and to compare the properties of monofilaments obtained from the virgin polymer and from blends of virgin and recycled polymer. Monofilaments were spun from the pure virgin polymer, from a blend of 85% virgin and 15% recycled polymer, and from 50% virgin and 50% recycled polymer. It was established that the addition of the recycled polymer to the virgin polymer lowered the crystallinity and average molecular orientation of as-spun monofilaments, which influenced the tensile properties of the monofilaments. Because of the poor miscibility of the virgin with the recycled polypropylene, which also contained some fractions of polyethylene, the as-spun monofilaments were porous, brittle and rigid, and had a high tendency to break.

Özet

Çalışmada, Slovenya’da toplanan ambalaj teleflerinden elde edilen %100 geri dönüşüm polipropilen liflerinin kullanımı ele alınmaktadır. Bu araştırmanın amacı, eriyikten monofilament lif çekiminin optimizasyonunun sağlanması ve ham, geri dönüşüm polipropilen polimeri ve bunların karışımlarından üretilen liflerin özelliklerinin karşılaştırılmasıdır. Monofilamentler; %100 ham polimer, %85 ham -%15 geri dönüşüm polimeri ve %50 ham -%50 geri dönüşüm polimerlerinden üretilmişlerdir. Ham polimer içerisine geri kazanım polimerinin eklenmesinin kristaliniteyi ve monofilamentlerin mukavemetlerini de etkileyen ortalama moleküler oryantasyonu düşürdüğü bilinmektedir. Bir miktar polietilen parçaları da içeren geri dönüşüm polimerinin, ham polimer ile karışabilirliğinin düşük olması sebebiyle karışım polimerinden elde edilen liflerin gözenekli, kolay kırılır ve sert olduğu, düşük kopma mukavemeti gösterdiği görülmektedir.

🔖

Cite This Article

KORLJAN, B. T., SVETEC, D. G., SLUGA, F., LESKOVSEK, M. (2022). Ham ve geri dönüşüm polipropilen polimerlerinin karışımından elde edilen monofilamentler. Tekstil ve Konfeksiyon, Cilt: 19 - Sayı: 3, 181–188. https://ajindex.com/articles/596961

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Radonjic G., 2008, “Embalaža in varstvo okolja. Zahteve, smernice in podjetniške priložnosti”, Založba Pivec, Maribor
  2. Paula, M. M., Medeiros Rodrigues, F. B. B., Bernardin, A. M., Fiori, M. A. and Angioletto, E., 2005, “Characterization of aluminized polyethylene blends via mechanical recycling”, Materials Science Engineering, Vol: A 403, pp: 37-41
  3. Luzuriaga, S., Kovárová, J. and Fortelný, I., 2006 “Degradation of pre-aged polymers exposed to simulated recycling: Properties and thermal stability”, Polymer Degradation Stability, Vol: 91 pp: 1226-1232
  4. Strapasson, R., Amico, S. C., Pereira, M. F. R. and Sydenstricker, T. H. D., 2005, “Tensile and impact behaviour of polypropylene/low density polyethylene blends”, Polymer Testing, Vol: 24, pp: 468-473
  5. Ambrose, C. A., Hooper, R., Potter, A. K. and Singh, M. M., 2002, “Diversion from landfill: quality products from valuable plastics”, Resources, Conservation Recycling, Vol: 36, pp: 309-318
  6. Bertin, S. and Robin, J.J., 2002, “Study and characterization of virgin and recycled LDPE/PP blends”, European Polymer Journal, Vol: 38, pp: 2255-2264
  7. Cavalieri, P. and Padella, F., 2002, ”Development of composite materials by mechanochemical treatment of post-consumer plastic waste”, Waste Management, Vol: 22, pp: 913-916
  8. Kostadinova Loultcheva, M., Proietto, M., Jilov, N. and La Mantia, F.P. 1997, “Recycling of hifh density polyethylene containers”, Polymer Degradation and Stability, Vol: 57, pp: 78-81
  9. Tišler-Korljan, B. and Gregor-Svetec, D., 2008, “Characteristics of monofilaments made from recycled polypropylene”, In: Dragcevic, Z. (ed.), 4th ITC&DC Conference. Magic world of textiles: book of proceedings. Faculty of Textile Technology, University of Zagreb, pp: 168-172
  10. Broda, J., 2003, “Morphology of the noncoloured and coloured polypropylene fibres”, Polymer, Vol: 44, pp: 1619-1629
  11. Socrates, G., 2004, “Infrared and Raman Characteristic Group Frequencies”, John Wiley & Sons, Hoboken. 12. “Plastic recycling” 2009, Waste online. http://www.wasteonline.org/uk 13. “Revised final report Cradle-to-gate life cycle inventory of nine plastic resins and two polyurethane precursos”, 2007, Franklin Associates. A division of eastern research group, inc., Prairie Village, Kansas
  12. Noda, R., Komatsu, M., Sumi, E. And Kasakuta, T., 2001, ”Evaluation of material recycling for plastics:environmental aspect”, J Mater Cycles Waste Manag, Vol: 3, pp: 118-125