Journals / Tekstil ve Konfeksiyon / 2009 / Cilt: 19 - Sayı: 4

Bayan pantolonunda kumaş yapılarının model ve kalıp tasarımına etkileri

Effects of fabric constructions on pattern design in women trousers

Pages
316–322
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this research, it has been put forward to necessity to carry out necessary amendments on the patterns according to the elastan ratios and fabric constructions in order to design suitable patterns to the bodies.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this research, the effects of fabric constructions having surface extension ability and different fibre construction on model and pattern designs were examined in women’s trousers in ready wear sector.
📊
Key Findings & Data:In the scope of the research, the prepared trousers patterns were applied on 6 different fabrics selected from between fabric being denim, cotton, having washing and elasticity and they were produced in the same conditions in the establishment medium.
💡
Conclusion & Impact:In this research, it has been put forward to necessity to carry out necessary amendments on the patterns according to the elastan ratios and fabric constructions in order to design suitable patterns to the bodies.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this research, the effects of fabric constructions having surface extension ability and different fibre construction on model and pattern designs were examined in women’s trousers in ready wear sector. The aim of this research is to determine the effects of especially cotton fabrics having different extension ability and different fibre construction on trousers patterns’ model and pattern design process. In the scope of the research, the prepared trousers patterns were applied on 6 different fabrics selected from between fabric being denim, cotton, having washing and elasticity and they were produced in the same conditions in the establishment medium. Later they were treated with washing operation and evaluated on 24 live mannequins through evaluation scale. Trousers which showed utmost change within 6 different fabrics were re-produced with the amended pattern and evaluated. In certain parts (hips, knee, waist etc.)of de-nim surfaces used in the research, it was determined that the applied pattern took form proportional to elasticity of the fabric and couldn’t keep form in certain parts (waist, loins etc.). It was observed that the ratio applied on the pattern did not become adequate according to elastane ratio of denim surfaces, whose elastane ratios are different, selected in the research. In this research, it has been put forward to necessity to carry out necessary amendments on the patterns according to the elastan ratios and fabric constructions in order to design suitable patterns to the bodies.

Özet

Bu araştırmada, hazır giyim sektöründe bayan pantolonunda, yüzey esneme kabiliyetine ve farklı lif konstrüksiyonuna sahip kumaş yapılarının, model ve kalıp tasarımına olan etkileri incelenmiştir. Denim kumaştan üretilen jean pantolon, hazır giyim sektöründe önemli bir paya sahiptir. Bu araştırmanın amacı, özellikle farklı esneme kabiliyetine ve farklı lif konstrüksiyonuna sahip olan pamuklu kumaşla-rın, pantolon kalıbının model ve kalıp tasarım sürecindeki etkilerini belirlemektir. Araştırma kapsamında, demin, pamuklu, yıkamalı ve elastikiyet kabiliyeti olan kumaşlar arasından seçilen 6 farklı kumaşa, hazırlanan pantolon kalıp uygulanarak, işletme ortamında aynı şartlarda üretilmiştir. Daha sonra yıkama işlemine tabii tutularak, değerlendirme ölçeği ile 24 canlı manken üzerinde değerlendirilmiştir. Değerlendirme sonucunda elde edilen bulgular doğrultusunda, kalıp üzerinde gerekli düzeltmeler yapılmıştır. 6 farklı kumaş içerisinden en çok değişim gösteren pantolon, düzeltilmiş kalıp ile tekrar üretilmiştir ve değerlendirilmiştir. Araştırmada kullanılan denim yüzeyler-den üretim ve yıkama sonrası vücudun belli bölümlerinde, (basen, diz, kalça vb.) uygulanan kalıbın, kumaşın elastikiyet oranına göre form aldığı, belli bölümlerin de ise (kalça, bel vb.) formu koruyamadığı tespit edilmiştir. Araştırmada seçilen elastan oranı farklı denim yüzeylerin elastan oranına göre kalıp üzerinde düşülen oranın yeterli gelmediği gözlenmiştir. Bu yüzeylerin hepsi uygun kalıp kotrüksiyonu gerçekleştirildiği taktirde, pantolon üretimine uygun olacağı tespit edilmiş ve bunun için çözüm öneriler geliştirilmiştir.

🔖

Cite This Article

ÇİVİTCİ, Ş., ÇAKMAK, F. Z. (2022). Bayan pantolonunda kumaş yapılarının model ve kalıp tasarımına etkileri. Tekstil ve Konfeksiyon, Cilt: 19 - Sayı: 4, 316–322. https://ajindex.com/articles/596932

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Law, K.M., Zhang Z.M. and Leung C.S., 2004, “Fashion Change and Fashion Consumption: The Chaotic Perspective”, Journal of Fashion Marketing and Management Vol.8 No.4, pp. 362-374
  2. Kansoy O., Dirgar E. ve Kırtay E., 2008, “Sanayide Çalışanlar İçin Uygun İş Kıyafetlerinin Geliştirilmesi”, Tekstil ve Konfeksiyon, Yıl:18(4), s:306-310
  3. Fozzard G., Spragg J. and Tyler D., 1996, “Simulation of Flow lines in Clothing manufacture Part 1: model Construction” International Journal of Clothing Science and Technology, Vol. 8 No. 4, pp. 17-27
  4. Behera, B.K., Chand S., Singh.G. and Rathee P., 1997, “Sewability of Denim” International Journal of Clothing Science and Technology, Vol. 9 No. 2, pp. 128-140
  5. Fan J. and Keighley J.H., 1989, “The Design of effective clothing for use in windy conditions”, International Journal of Clothing Science and Technology, Vol. 1 No. 2, pp. 28-32
  6. Dimitrovski, K., Demšar A. and Rolich T., 2007, “Mass Customization In Weaving”, Intelligent Textiles and Mass Customisation International Conference Casablanca, Morocco, November 15 - 17, pp. 277-286
  7. Frumkin S., Bradley S. and Hegde S., 2007, “A Study To Determine The Importance Of Mass Customisation Relative To Fit, Comfort And Design In Product Selection”, Intelligent Textiles and Mass Customisation International Conference Casablanca, Morocco, November 15 - 17, pp. 125-137
  8. Tseng, M.M. and Jiao J., 2001, Mass Customization, Handbook of Industrial Engineering, Technology and Operation Management, Editor: G. Salvendy, 3. Edition, wiley, New York, pp.101
  9. Kansoy O. ve Erdoğan Ç., 2006, “Giysi Model Özelliklerinin Parça Sayısı, Parça Çevresi ve Dikim Süresi İle İlişkileri” Tekstil ve Konfeksiyon, Yıl:16(1), s.122-128
  10. Crawford, C.A., 1996, The Art of Fashion Draping 2. Edition, Fairchild Publications, New York, pp.51
  11. Serdar, G., 1998, “Bayan Ceketinde Kumaş Yapılarının Model ve Kalıp Tasarımına Etkileri (Yüksek Lisans tezi) ”, Gazi Üniversitesi Sosyal Bilimler Enstitüsü, Ankara., s.24
  12. Çivitçi, Ş. (2004), Moda Pazarlama, Asil Yayınevi, Ankara., s.82-90
  13. Chen Y., Zeng X., Thomasseg S., Happiette M., Bruniaux P. and Yu W., 2007, “A New Method Of Ease Allowance Generatıon For Personalızatıon Of Garment Desıgn”, Intelligent Textiles and Mass Customization International Conference Casablanca, Morocco, November 15 - 17, pp. 288-298
  14. GersÏak J., 2002, “Development of the system for qualitative prediction of garments appearance quality” International Jour