Journals / Tekstil ve Konfeksiyon / 2011 / Cilt: 21 - Sayı: 3

Investigatıon of different ring spinning methods for producing core spun yarns containing stainless steel wire

Paslanmaz çelik tel içerikli özlü iplik üretimi için farklı ring eğirme metodlarının incelenmesi

Pages
225–235
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results of the experimental study, the existence of metal wires in the yarn structure has negative effects on the strength, breaking elongation and hairiness properties.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to investigate the possibility and abilities of core-spun yarn manufacture containing metal wire with the different kinds of ring spinning methods.
📊
Key Findings & Data:For this aim, Ne 18, Ne 24 and Ne 30 count yarn samples with metal or without metal wire, were produced by means of ring, siro, compact spinning methods under controlled conditions on a sample ring machine.
💡
Conclusion & Impact:According to the results of the experimental study, the existence of metal wires in the yarn structure has negative effects on the strength, breaking elongation and hairiness properties.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The aim of this study is to investigate the possibility and abilities of core-spun yarn manufacture containing metal wire with the different kinds of ring spinning methods. For this aim, Ne 18, Ne 24 and Ne 30 count yarn samples with metal or without metal wire, were produced by means of ring, siro, compact spinning methods under controlled conditions on a sample ring machine. According to the results of the experimental study, the existence of metal wires in the yarn structure has negative effects on the strength, breaking elongation and hairiness properties. It is found that the use of siro and compact spinning methods in core-spun yarn manufacture will help to reduce the negative effects raised from the existence of metal wire, on the strength, breaking elongation and hairiness properties of yarns

Özet

Bu çalışmanın amacı, farklı ring eğirme metotları ile metal tel içerikli özlü iplik üretimi, imkan ve kabiliyetlerinin araştırılmasıdır. Bu amaç doğrultusunda, numune ring makinesinde ring, siro ve kompakt eğirme metodları kullanılarak kontrollü şartlarda Ne 18, Ne 24 ve Ne 30 numaralarında paslanmaz çelik tel içeren ve içermeyen iplik numuneleri üretilmiştir. Yapılan deneysel çalışma sonuçlarına göre, yapıdaki paslanmaz çelik tel varlığı üretilen ipliklerin mukavemet, kopma uzaması ve tüylülük özelliklerini olumsuz etkilemektedir. Siro ve kompakt eğirme metotlarının metal içerikli özlü iplik eğirmede kullanımının, metal tel varlığına bağlı olarak ipliklerin mukavemet, kopma uzaması ve tüylülük özelliklerinde görülen olumsuzlukların azaltılmasında faydalı olabileceği görülmüştür.

🔖

Cite This Article

OKYAY, G., BİLGET, Ö., KILIÇ, G., ÖRTLEK, H. G. (2022). Investigatıon of different ring spinning methods for producing core spun yarns containing stainless steel wire. Tekstil ve Konfeksiyon, Cilt: 21 - Sayı: 3, 225–235. https://ajindex.com/articles/596891

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Derdiyok, U., Metal Lif Takviyeli Pamuk İpliklerinden Üretilmiş Örme Kumaşların Mekanik ve Termal Özelliklerinin İncelenmesi, Yüksek Lisans Tezi, Marmara Üniversitesi, İstanbul, 2007Baykal, P. D., 2009, “ Metal İplik İçeren Dokuma Kumaşların Performans Özelliklerinin İncelenmesi ”, Tekstil ve Konfeksiyon, Ocak-Mart, Vol:16(1), pp: 39-44
  2. Baykal, P. D., 2009, “ Metal İplik İçeren Dokuma Kumaşların Performans Özelliklerinin İncelenmesi ”, Tekstil ve Konfeksiyon, Ocak-Mart, Vol:16(1), pp: 39-44
  3. Cheng, K. B., Cheng, T. W., Lee, K. C., Ueng, T. H., Hsing, W. H., 2003, “ Effects of Yarn Constitutions and Fabric Specifications on Electrical Properties of Hybrid Woven Fabrics ”, Composites Part A:a pplied science and manufacturing, Vol: 34, pp: 971-978
  4. Ramachandran, T., Vigneswaran, C., 2009, “ Tenacity and Breaking Extension of Cotton Covered Copper Open-End Friction-Spun Yarns ”, Indian Journal of Fibre & Textile Research, June, pp: 179-182
  5. Lou, C.W., 2005, “ Process of Complex Core Spun Yarn Containing a Metal Wire”, Textile Res. J, Vol: 75 (6), pp: 466-473
  6. Ozdil, N., Ozdogan, E., Demirel, A., and Oktem, T., 2005, “ A Comparative Study of the Characteristics of Compact Yarn-Based Knitted Fabrics ”, Fibers & Textiles in Eastern Europe, Vol 13(2/50), pp: 39-43
  7. Beceren, Y., Nergis, B. U., 2008, “ Comparison of the Effects of Cotton Yarns Produced by New, Modified and Conventional Spinning Systems on Yarn and Knitted Fabric Performance, Textile Research Journal, Vol: 78(4), pp: 297-303
  8. Saki, Z., Johari, M. S., Etrati, S. M., 2009, “ Investigation of the Internal Structure and Mechanical Properties of RoCoS Yarn ”, AUTEX 2009 World Textile Conference, Izmir, Turkey, pp: 1249-1252
  9. Ute, B. T., Kadoglu, H., 2009, “ A Research on Spinning Cotton Fibers by Sirospun System ”, AUTEX 2009 World Textile Conference, Izmir, Turkey, pp:1092-1097
  10. Nikolic, M., Stjepanovic, Z., Lesjak, F., and Stritof, A., 2003, “ Compact Spinning for Improved Quality of Ring-spun Yarns ”, Fibers & Textiles in Eastern Europe, Vol: 11(4), pp: 30-35
  11. Ömeroglu, S., 2002, “ Kompakt iplikçilik sisteminde üretilen ipliklerin yapısal özellikleri ve bazı üretim parametrelerinin etkileri üzerine bir araştırma ”, Uludağ Üniversitesi, Doktora Tezi, Bursa, Türkiye
  12. Goktepe, F., Yilmaz, D., Goktepe, O., 2006, “ A Comparison of Compact Yarn Properties Produced on Different Systems ”, Textile Research Journal, Vol: 76 (3), pp: 226-234
  13. Yılmaz, D., Özkan, H. H.,