SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2012 / Cilt: 22 - Sayı: 3

Sodyum hidroksit kullanılarak selüloz esaslı kumaşlara baskı efekti verilmesi ve bu kumaşların renk verimi ve haslık özelliklerinin incelenmesi

Printing of cellulose-based fabrics with sodium hydroxide and investigating color efficiency and fastness properties of these fabrics

Selahattin SERİN
Remzi GEMCİ
H. Hale SOLAK
Mustafa KURT
Pages
240–247
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

On the other hand, fastness properties of all printed samples were generally observed in the range of 4 and 5 grades.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it was aimed to gain printing effect on cellulose based fabrics without using dye in printing paste.
📊
Key Findings & Data:Samples having different fabric weights and patterns were colored with reactive dyes by pad-batch method after they had been printed with paste containing sodium hydroxide instead of dye.
💡
Conclusion & Impact:On the other hand, fastness properties of all printed samples were generally observed in the range of 4 and 5 grades.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, it was aimed to gain printing effect on cellulose based fabrics without using dye in printing paste. Samples having different fabric weights and patterns were colored with reactive dyes by pad-batch method after they had been printed with paste containing sodium hydroxide instead of dye. Color efficiency of each printed sample was detected under different light sources and their fastness values were investigated. By this suggested method, it could be possible to gain printing effect to different fabrics. However printing accuracy was strongly related with color and fabric weight. On the other hand, fastness properties of all printed samples were generally observed in the range of 4 and 5 grades.

Özet

Bu çalışmada, selüloz esaslı kumaşlara pat içerisinde boyar madde kullanılmaksızın baskı efekti kazandırılması amaçlanmıştır. Farklı dokuma tipine ve kumaş ağırlığına sahip numuneler, boyarmadde yerine sodyum hidroksit içeren baskı patı kullanılarak şablon baskı yöntemiyle baskılandırılmış ve sonrasında emdirme yöntemi ile renklendirilmişlerdir. Baskılı kumaşların farklı ışık kaynakları altındaki renk verimleri gözlenmiş ve haslık değerleri ölçülmüştür. Bu yöntem ile selüloz esaslı kumaşlara baskı efektinin kazandırıldığı, baskı netliğinin kullanılan renk tonuna ve kumaş ağırlığına göre değiştiği tespit edilmiştir. Kumaşların haslık değerlerinin ise 4 ve 5 aralığında değişen değerlerde seyrettiği gözlenmiştir

🔖

Cite This Article

SERİN, S., GEMCİ, R., SOLAK, H. H., KURT, M. (2022). Sodyum hidroksit kullanılarak selüloz esaslı kumaşlara baskı efekti verilmesi ve bu kumaşların renk verimi ve haslık özelliklerinin incelenmesi. Tekstil ve Konfeksiyon, Cilt: 22 - Sayı: 3, 240–247. https://ajindex.com/articles/596860

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (21)

  1. Megep, 2008, “Rotasyon Baskı”, Ministry of National Education Publishing, Ankara
  2. Miles L.W.C., 1981, “Textile Printing”, First Edition, Dyers Company Publication, Bradford
  3. Çiftçi A., Çiftçi F., Özçağatay U. and Özçağatay H., 1990, “Pamuklu Mamüllerde Reaktif Boyalı Zeminler Üzerine Aşındırma ve Rezerve Baskılar”, Sagem Publication Number: 108, Bursa
  4. Hall A. J., 1975, “Standard Handbook of Textile”, Newnes&Butterworths Publishing, London
  5. Sayar R., 1991, “Aşındırma ve Rezerve Baskı”, Tekstil and Mühendis, 27(1), pp 170-171
  6. Storey J., 1978, “Manual of Dyes and Fabrics”, Thames and Hudson Ltd. Publication, London
  7. Gulrajani M. L., 1993, “Discharge and Resist Printing-Part I”, Colorage, 40(9), pp 10-18
  8. Iber F., 1979, “Tekstil Basmacılığı”, Ege University, Department of Textile Engineering, Lecture Notes, İzmir
  9. Megep, 2007, “Textile Surfaces-Garment Production Technology”, Ministry of National Education Publishing, Ankara
  10. Ceylan N., 1989, “Baskı Teknikleri Arasındaki İlişkinin Araştırılması ve Farklı Baskı Makinalarının Tasarlanması”, Uludağ University, Bursa
  11. Hannay R. J., 1960, “Recent Advances in Textile Printing with Special Reference to Calcium Sulphoxylate Formaldehyde”, Society of Dyers and Colourists, 76(1), pp 11-15
  12. Taylor W. S., 1985, “Textile Printing”, Thames and Hudson Ltd. Publication, London
  13. Shah K. G., Pancholi K. D. and Setalvad J. I., 1983, US Patent 4,378,225
  14. Özgüney A.T. and Tarakçıoğlu I., 1998, “Effect of Printing Parameters on Paste Transfer”, Tekstil ve Konfeksiyon, 3(1), pp 328-332
  15. Akcakoca Kumbasar E. P. and Bide M., 2000, “Reactive Dye Printing with Mixed Thickeners on Viscose”, Dyes and Pigments, 47(1-2), pp 189-199
  16. Tarakçıoğlu I., 1979, “Tekstil Terbiyesi ve Makineleri”, Ege University, Department of Textile Engineering, Lecture Notes, İzmir
  17. Megep, 2011, “Çözelti Hazırlama 2-Baskı Patı Hazırlama”, Ministry of National Education Publishing, Ankara
  18. Turkish Standards Institute, 1999, TS EN 20105-C05: Test for Color Fastness of Textiles-Color Fastness to Washing
  19. Turkish Standards Institute, 2001, TS 1008 EN ISO 105-B02: Textiles- Tests for Color Fastness- Part B02: Color Fastness to Artificial Light: Xenon Arc Fading Test
  20. Turkish Standards Institute, 2006, TS EN ISO 105-X12: Textiles - Tests for Color Fastness - Part X12: Color Fastness to Rubbing
  21. Turkish Standards Institute, 2006, TS EN ISO 105-E01: Textiles-Tests for Color Fastness-Part E01: C