Journals / Tekstil ve Konfeksiyon / 2012 / Cilt: 22 - Sayı: 3

Keten ve pamuk karışımlarının ring ve open-end iplikçiliklerinde eğrilmesi üzerine bir araştırma

An investigation on ring and open-end spinning of flax/cotton blends

Pages
218–222
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Consequently, our study demonstrated that physical yarn properties were effected negatively with increasing ratio of flax fiber and the effects were found statistically significant (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Flax fibers have some significant advantages such as high tenacity and natural brightness.
📊
Key Findings & Data:In addition, flax fibers are preferred in terms of comfort.
💡
Conclusion & Impact:Consequently, our study demonstrated that physical yarn properties were effected negatively with increasing ratio of flax fiber and the effects were found statistically significant (p
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Flax fibers have some significant advantages such as high tenacity and natural brightness. In addition, flax fibers are preferred in terms of comfort. In this study, effects of different blending ratio and some production parameters on ring and open-end spun flax/cotton blended yarns were investigated. The effects of blend ratio, yarn count, twist multiplier and spinning system were analyzed with SPSS programme. Consequently, our study demonstrated that physical yarn properties were effected negatively with increasing ratio of flax fiber and the effects were found statistically significant (p

Özet

Gittikçe önemi artan keten lifleri yüksek mukavemet, doğal parlaklık gibi bazı önemli avantajlara sahiptir. Ayrıca keten lifleri konfor açısından da tercih edilmektedir. Bu çalışmada ring ve open-end sistemlerinde eğrilmiş keten/pamuk karışımlı ipliklerde farklı karışım oranlarının ve bazı üretim parametrelerinin iplik özelliklerine etkisi incelenmiştir. Karışım oranı, iplik numarası, büküm katsayısı ve eğirme sistemlerinin etkisi SPSS istatistik programı ile değerlendirilmiştir. Sonuç olarak, çalışma karışımdaki keten oranının artmasıyla iplik özelliklerinin olumsuz yönde etkilendiğini ve sonuçlar arasındaki farkın önemli olduğunu göstermiştir (p

🔖

Cite This Article

ŞEVKAN, A., KADOĞLU, H. (2022). Keten ve pamuk karışımlarının ring ve open-end iplikçiliklerinde eğrilmesi üzerine bir araştırma. Tekstil ve Konfeksiyon, Cilt: 22 - Sayı: 3, 218–222. https://ajindex.com/articles/596859

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Harwood, J., Copmick, P., Waldron, D. and Bonadei, R., 2007, Evaluation of Flax Accessions for High Value Textile end Uses, Science Direct, Industrial Crops and Products, Vol. 27, pp. 22-28
  2. Kadoğlu, H., 1995, Keten/Viskon karışımının OE Rotorlu Sistemde Eğrilmesi Üzerine Yapılan Bir Araştırma, Tekstil & Teknik, Vol: 122, pp: 30-36
  3. Gökçil, V. ve Türkoğlu, K., 2008, Keten Karışımlı İpliklerin Sirospun Yöntemine Göre Eğrilebilirliğinin Araştırılması, Ege Üniversitesi Lisans Bitirme Tezi
  4. Skomra, E., 2006, A Comparative Study of Athletic Apparel Made from Cotton/Flax, Cotton/Pes, Pes/Flax Blends, Thesis in Apparel, Textiles and Merchandising, Eastern Michigan University
  5. Chen, Y., Yu, C., Calamari, W. T. and Calamari, T. A., 1999, Preparing and Characterizing Kenaf/Cotton Blended Fabrics, Textile Research Journal 69 (10), pp. 720-724
  6. Memmedov, S., 2001, Keten İplikçiliğinde Üretim Yöntemleri, Ege Üniversitesi Lisans Bitirme Tezi
  7. Jackowska, L., Jackowski, T., Cyniak, D., Strumillo and Czekalski J., 2004, Neural Model of the Spinning Process for Predicting Selected Properties of Flax/Cotton Yarn Blends, Fibres & Textiles 2004, Vol: 12, pp. 17-21
  8. Foulk, J.A., Dodd, R. B., McAlister, D., Chun, D., Akin, D. E. and Morrison H., 2007, Flax/Cotton Fiber Blends, Science Direct, Industrial Crops and Products, Vol: 25, pp: 8-16
  9. Jackowski, T., Chylewska, B., Cyniak, D., Czekalski, J., Jackowska, L. and Strumillo, 2003, Modelling of Relationship Between Feding Sliver Structures and Parameters of Cotton/Linen Blended Yarns, Fibres & Textiles, Vol:11, pp: 12-17
  10. Kadoğlu, H., Open-End Rotor İplik Eğirme Teknolojisi, 2004, E.Ü. Tekstil ve Konfeksiyon Araştırma ve Uygulama Merkezi Yayını
  11. Debnath, S. and Sengupta, S., 2009, Effect of Linear Density, Twist and Blend Proportion on Some Physical Properties of Jute and Hollow Polyester Blended Yarn, Indian Journal of Fibre & Textile Research, Vol.34, pp: 11-19.