Journals / Tekstil ve Konfeksiyon / 2013 / Cilt: 23 - Sayı: 3

Kuru ve yumuşatıcılı polyester rib dokuma kumaşların iplik çekme yöntemi ile Tutunma-kayma aşamasının incelenmesi

Investigation of stick-slip stage of yarn pull-out in dry and softening treated Polyester ribs woven fabric

Pages
247–254
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that stick-slip force and accumulative retraction force depend on the number of pulled ends in the fabric, fabric sample dimensions and softening treatments.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study was to understand the stick-slip properties of polyester ribs woven fabric.
📊
Key Findings & Data:For this reason, pull-out test was conducted on dry and softening treated polyester woven fabrics.
💡
Conclusion & Impact:It was found that stick-slip force and accumulative retraction force depend on the number of pulled ends in the fabric, fabric sample dimensions and softening treatments.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The aim of this study was to understand the stick-slip properties of polyester ribs woven fabric. For this reason, pull-out test was conducted on dry and softening treated polyester woven fabrics. It was found that stick-slip force and accumulative retraction force depend on the number of pulled ends in the fabric, fabric sample dimensions and softening treatments. Stick-slip forces of polyester fabric in the multiple yarn pull-out test were higher than those of the single yarn pull-out test. Stick-slip force in single and multiple yarn pull-out tests in the dry polyester ribs fabric were generally higher than those of the softening treated polyester ribs fabric. On the other hand, the amount of stick-slip force was related to the number of interlacement points in the fabric whereas the amount of accumulative retraction force was related to fabric structural response.

Özet

Bu çalışmanın amacı; polyester rib dokuma kumaşın tutunma-kayma özelliklerinin anlaşılmasıdır. Bu nedenle, kumaştan iplik çekme testi kuru ve yumuşatıcılı polyester dokuma kumaşlar üzerine uygulanmıştır. Tutunma-kayma kuvveti ve toplam geri çekme kuvvetinin kumaştan çekilen iplik uç sayısına, örnek boyutlarına ve yumuşatıcı muamelesine bağlı olduğu bulunmuştur. Çoklu iplik çekme ile polyester kumaştan elde edilen tutunma-kayma kuvvetinin tekli iplik çekme ile elde edilene göre daha yüksek çıkmıştır. Tekli ve çoklu iplik çekme testleri ile polyester rib kumaştan elde edilen tutunma-kayma kuvvetinin yumuşatıcılı polyester rib kumaşa göre genel olarak daha yüksek çıkmıştır. Öte yandan, tutunma-kayma kuvvetinin büyüklüğü kumaştaki kesişme sayısı ile ilgili iken toplam geri çekme kuvvetinin kumaşın yapısal tepkisi ile ilgilidir.

🔖

Cite This Article

BİLİŞİK, K., YILDIRIM, B. (2022). Kuru ve yumuşatıcılı polyester rib dokuma kumaşların iplik çekme yöntemi ile Tutunma-kayma aşamasının incelenmesi. Tekstil ve Konfeksiyon, Cilt: 23 - Sayı: 3, 247–254. https://ajindex.com/articles/596805

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Sebastian, S.A.R.D., Bailey, A.I., Briscoe, B. J. and Tabor, D., 1987, “Extensions, displacements and forces associated with pulling a single yarn from a fabric”, Journal of Physics D: Applied Physics, Vol. 20, pp. 130-139
  2. B. S. Gupta, “Friction in Textile Materials”, Textile series no. 78, pp. 30-40, Woodhead Publishing Limited and CRC Press LLC., Cambridge, 2010
  3. Briscoe, B.J. and Motamedi, F., 1992, “The ballistic impact characteristics of aramid fabrics: the influence of interface friction”, Wear, Vol. 158, pp. 229-247
  4. Briscoe, B. J. and Motamedi, F., 1990, “Role of interfacial friction and lubrication in yarn and fabric mechanics”, Textile Research Journal, Vol. 60(12), pp. 697-708
  5. Nikonova, E. A. and Pakshver, A. B., 1973, “The friction properties of textile yarns”, Fiber Chemistry, Vol 4(6), pp. 657-660
  6. Sebastian, S.A.R.D., Bailey, A.I., Briscoe, B. J. and Tabor, D., 1986, “Effect of a softening agent on yarn pull-out force of a plain weave fabric”, Textile Research Journal, Vol. 56(10), pp. 604-611
  7. Ravandi, S.A.H. and Toriumi, K., 1996, “Spectral analysis of the yarn-pullout force from plain-weave fabric”, Journal of the Textile Institute, Vol. 87(3), pp. 522-531
  8. Badrossaway, M. R., Ravandi, S. A. H. and Morshed, M., 2001, “Fundamental parameters affecting yarn-pullout behavior”, Journal of the Textile Institute, Vol. 92(3), pp. 280-287
  9. Pan, N. and Yoon, M.Y., 1993, “Behavior of yarn pull-out from woven fabrics: Theoretical and experimental”, Textile Research Journal, Vol. 63(11), pp. 629-637
  10. Gawandi, A., Thostenson, E.T., and Gilllespie, J. W., 2011, “Tow pullout behavior of polymer-coated Kevlar fabric”, J Mater Sci., 46(1), pp.77-89
  11. Bilisik, K. and Korkmaz, M., 2011, “Single and multiple yarn pull-outs on aramid woven fabric structures,” Textile Research Journal, Vol. 81(8), pp. 847- 864
  12. Bilisik, K., 2011, “Pull-out properties of polyester woven fabrics: effects of softening agent and interlacement on single and multiple yarn pull-out forces and analysis by statistical model”, Fibers and Polymers, Vol. 12(8), pp. 1106-1118
  13. Bilisik, K., 2012, “Experimental determination of fabric shear by yarn pull-out method”, Textile Research Journal, Vol. 82(10), 1050-1064
  14. Bilisik, K., 2012, “Experimental determination of yarn pull-out properties of para-aramid (Kevlar®) woven fabric ”, Journal of Industrial Textiles, Vol. 41(3), pp. 201-221
  15. Bilisik, K. and Korkmaz, M., 2012, “Experimental charac