Journals / Tekstil ve Konfeksiyon / 2013 / Cilt: 23 - Sayı: 3

Ring iplik makinasındaki apron ve manşon elemanlarının iplik kalitesi üzerindeki etkileri

Effects of ring machine apron and cot components on yarn quality

Pages
213–219
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This experiment showed that cot and apron quality has direct influence on the yarn quality.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aprons and cots that are used in the drafting system have important influences on yarn quality.
📊
Key Findings & Data:In this study, 176 mtex and 26.6 mm of fiber length of cotton roving of 909 tex were blended with various cottons ( 42 % Turkey, 40 % Uzbekistan, 16 % Tajikistan and 2 % Ethiopian).
💡
Conclusion & Impact:This experiment showed that cot and apron quality has direct influence on the yarn quality.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Aprons and cots that are used in the drafting system have important influences on yarn quality. In this study, 176 mtex and 26.6 mm of fiber length of cotton roving of 909 tex were blended with various cottons ( 42 % Turkey, 40 % Uzbekistan, 16 % Tajikistan and 2 % Ethiopian). The 20 tex (αtex, 37.4) cotton yarns were produced at spindle speed of 15093 rev/min with 42 mm ring diameter and a 45 mg C type traveller (No. 3/0) in ring frames. The effects of cots and aprons on quality of yarns (breaking tenacity, elongation, irregularity and hairiness) were examined under all conditions. In each experiment four yarns were produced and the results of the experiments were given as their average. The yarn and twist values were fixed; the effects of variation of only apron and cots on yarn quality were studied. The experiments were analyzed in order to determine which parameters had significant effects on yarn properties. This experiment showed that cot and apron quality has direct influence on the yarn quality.

Özet

Çekim sisteminde kullanılan apron ve manşonların iplik kalite parametreleri üzerinde büyük etkisi bulunmaktadır. Bu çalışmada, 176 mtex inceliğinde ve 26.6 mm uzunluğunda karışım lifler kullanılarak (% 42 Türkiye, % 40 Özbekistan, % 16 Tajikistan ve % 2 Etiyopya pamukları) 909 tex numarada fitil ve 20 tex (αtex, 37.4) numara iplikler üretilmiştir.Üretimler ring makinesinde 15093 devir/dakika iğ devri ve C tipi 42 mm çapında 45 mg (No.3/0) kopça kullanılarak gerçekleştirilmiş ve daha sonra iplik kalite parametrelerine (kopma mukavemeti, kopma uzaması, iplik düzgünsüzlüğü ve iplik tüylülüğü) apron ve manşonun etkileri incelenmiştir. Çalışma sırasında sonuçların sağlıklı olabilmesi için her bir deney için dört adet iplik kopsu üretilmiş ve deney sonuçları bu dört kopsun ortalama değerleri alınarak verilmiştir. Araştırma sırasında sadece apron ve manşonların özellikleri değiştirilerek yapılan üretimin deneyleri yapılmıştır. Çalışmanın son bölümünde ise deney sonuçları kendi aralarında karşılaştırılarak en iyi sonuçların hangi parametrelerde ortaya çıktığı tespit edilmiştir. Gözlem sonuçları apron ve manşonların iplik kalitesine doğrudan etkisi olduğunu göstermiştir.

🔖

Cite This Article

CANOĞLU, S. (2022). Ring iplik makinasındaki apron ve manşon elemanlarının iplik kalitesi üzerindeki etkileri. Tekstil ve Konfeksiyon, Cilt: 23 - Sayı: 3, 213–219. https://ajindex.com/articles/596796

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Kane, C.D., Ghalsasi, S.G., 1992, “Studies on Ring Frame Drafting. I”, Ind. J. Fibre Textile Res., Vol. 102 (7), pp. 78 ─ 85
  2. Kane, C.D., Joshi, A.L., Tolamatti, A.P., 1992, “Studies on Ring Frame Drafting. II” Ind. J. Fibre Textile Res., Vol. 102 (8), pp. 86─90
  3. Mahajan, S.D., Balasubramanian, N., 1978, “Study of Factors Affecting Cot Slippage on Ring
  4. Frames”, Journal of the Textile Association, Vol. 39 (6), pp. 201 ─ 208
  5. Nawaz, M., Butt, M. A., 1996,” Effect of Different Drafting Parameters on Yarn Regularity”, Pakistan Textile Journal, Vol. 45 (4), pp. 29 ─ 31
  6. Russell, S.J., Dobb, M. G., 1995,“The Effect of Rubbing on The Structural and Tensile Properties of Woollen Slubbings”, J. Fibre Textile Inst., Vol. 86 (3), pp. 415 ─ 424
  7. Sambandhan, P.K.S., Sudhangaran C., 1983,” Aprons and Cots”, Ind. J. Fibre Textile Res., Vol. 94 (1), pp. 91 ─ 97
  8. Subramaniam, V., Mohammed, 1991”A., Effects of Apron Spacing and Break Draft on Double Rove Yarn Quality in Short-Staple Spinning”, Textile Res. J., Vol. 61 (5), pp. 280 ─ 285
  9. Su, C.L., Jiang, J.Y., 2004,” Fine Count Yarn Spun with a High Draft Ratio”, Textile Res. J., Vol. 74 (2), pp. 123 ─126
  10. Gökdal H., Kasapoğlu M., 2005, “Apron ve Manşonun İplik Kalitesi Üzerindeki Etkileri”, Marmara Üniversitesi, Tekstil Eğitimi Bölümü, B.Sc.Thesis, Supervised by S. Canoglu, İstanbul
  11. İlknur S., 2003, “Technical Knowledge About Usage of Apron and Cot”, Asteks Kauçuk ve Plastik San. Tic. A.Ş., İstanbul.