Journals / Tekstil ve Konfeksiyon / 2013 / Cilt: 23 - Sayı: 1

Dokuma kumaşların antibakteriyel bitim işlemlerinin sonucu olarak zeta potensiyeli değişimine ilişkin yeni bir yaklaşım

Novel approach regarding zeta potential varıation as a consequence of a woven fabrics antibacterıal finishing treatment

Pages
43–48
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Zeta Potential values belonging to specimens treated with zinc oxide suspensions with different concentrations, before and after washing decreased with the increase of zinc oxide concentration, but its stability was noticeable.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Police uniforms made of polyester fibres should present a high level of antimicrobial protection, with respect to the environmental conditions they are worn in.
📊
Key Findings & Data:Based on this the present research was conducted on polyester fibre woven fabrics, previously treated with zinc oxide with various concentrations for improved antimicrobial properties.
💡
Conclusion & Impact:Zeta Potential values belonging to specimens treated with zinc oxide suspensions with different concentrations, before and after washing decreased with the increase of zinc oxide concentration, but its stability was noticeable.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Police uniforms made of polyester fibres should present a high level of antimicrobial protection, with respect to the environmental conditions they are worn in. Based on this the present research was conducted on polyester fibre woven fabrics, previously treated with zinc oxide with various concentrations for improved antimicrobial properties. The main parameter used to quantify the time stability of the antimicrobial treatment was Zeta Potential and its variation. The degradation of the antimicrobial treatment during the period of uniform wearing was simulated through repeated washes in the laboratory and its stability was estimated by estimation of the Zeta Potential. Zeta Potential values belonging to specimens treated with zinc oxide suspensions with different concentrations, before and after washing decreased with the increase of zinc oxide concentration, but its stability was noticeable.

Özet

Polyester lifinden yapılan polis üniformaları, giyildikleri çevresel koşullar göz önünde bulundurulduğunda, yüksek seviyede antimiktrobiyal koruma sağlamalıdır. Bu bilgiye dayanarak, çalışma kapsamında, gelişmiş antimikrobiyal özellik için çeşitli konsantrasyonlarda çinko oksit ile işlem görmüş polyester lifinden elde edilmiş dokuma kumaşlar kullanılmıştır. Antimikrobiyal işlemin süre istikrarını ölçmede Zeta Potansiyeli ve değişimi ana parametre olarak kullanılmıştır. Üniformanın giyilmesi aşamasında, antimikrobiyal işlemin bozunması, laboratuarda tekrarlı yıkamalar ile simüle edilmiş ve dayanıklılığı Zeta Potansiyelinin tahmini yoluyla değerlendirilmiştir. Yıkama öncesi ve sonrasında, farklı konsantrasyonlarda çinko oksit süspansiyonları ile işlem görmüş numunelere ait Zeta Potansiyel değerleri, çinko oksit konsantrasyonunun artışı ile azalmıştır fakat dikkate değer bir dayanıklılık söz konusudur.

🔖

Cite This Article

BROASCA, G., SUCHEA, M. P., CIOCOIU, M., FARIMA, D., VRINCEANU, N., CAMPAGNE, C., RIMBU, C., IORGOAEA, M. (2022). Dokuma kumaşların antibakteriyel bitim işlemlerinin sonucu olarak zeta potensiyeli değişimine ilişkin yeni bir yaklaşım. Tekstil ve Konfeksiyon, Cilt: 23 - Sayı: 1, 43–48. https://ajindex.com/articles/596788

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Ursache M., Loghin C., Muresan R., Cerempei A. and Muresan A, 2011,” Investigation on the effects of antibacterial finishes on dyed cotton knitted fabrics’’, Tekstil Ve Konfeksyon, Vol: 21, pp: 249-256
  2. Lorne B., Perrier F. and Avouac J. P., 1999, “Streaming potential measurements’’, Journal of Geophysical Research, Vol: 104(17), pp: 57–877
  3. Leroy P., Tournassat C., Bizi M., 2011, „The influence of surface conductivity on the apparent zeta potential of TiO2 nanoparticles’’, Journal of Colloid and Interface Science, Vol:356(2), pp: 442-453
  4. White S. B., Jau-Min Shih A. and Pipe K.P., 2011, ”Investigation of the electrical conductivity of propylene glycol-based ZnO nanofluids”, Nanoscale Research Letters, Vol:6, pp: 346
  5. Buksek H., Luxbacher T. and Petrinic I., 2010, „Zeta Potential Determination of Polymeric Materials Using Two Differently Designed Measuring Cells of an Electrokinetic Analyzer”, Acta Chim. Slov., Vol:57, pp. 700–706
  6. Guo L., Campagne C., Perwuelz A. and Leroux F.,2009,’’ Zeta Potential and Surface Physico-chemical Properties of Atmospheric Air-plasma-treated Polyester Fabrics’’, Textile Research Journal, Vol 79(15), pp: 1371–1377; 7. www.malvern.co.uk; 8. www.anton-paar.com
  7. M. Tasaka, S. Tamura, N. Takemura and K. Morimoto, J. Membrane Sci., 12 (1982) 169 10. M.G.A. Khedr, S.M. Abdel Haleem and A. Baraka, J. Electroanal. Chem., 184 (1985) 161 11. J.A. Ibanez, J. Forte, A. Hernandez and F. Tejerina, J. Membrane Sci., 36 (1988) 45 12. M. Nystrom, M. Lindstrom and E. Matthiasson, Colloids Surfaces, 36 (1989) 297 13. J. Shaw, Electrophoresis, Academic Press, London, 1969 14. D.R.J. Hunter, Zeta Potential in Colloid Science: Principles and Applications, Academic Press, London, 1981 15. H.J. Jacobasch, G. Baubock and J. Schurz, Colloid and Polymer Sci., 263 (1985) 3 16. H.-J. Jacobasch and J. Schurz, Progr. Coll. Polym. Sci., 77 (1988) 40 17. H.-J. Jacobasch and J. Schurz, Progr. Coll. Polym. Sci., 77 (1988) 40 18. A.Sze, D. Erickson, L.Ren, and D. Li, 2003, J. Coll. Interface Sci., 261, pp: 402–410
  8. G. Broasca, C.Campagne, D.Farima, M.Ciocoiu, M.Iorgoaea, Vrinceanu N., The International Scientific Conference UGALMAT 2011, Advanced materials and technologies, Galati, Romania, (2011) 175 20. J. Biscan J., Croatica Chemica Acta, CCACAA 80(3-4), (2007) 357 21. Muresan R., Controlul prin Potentialul Zeta al unor operatii tehnologice de tratare si finisare la materialele fibroase in vederea optimizarii acestora, PhD Thesis, I