SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2014 / Cilt: 24 - Sayı: 2

Hesaplamalıkumaşlarınakışkanlar dinamiği yardımıyla örme hava geçirgenliğinin tahmin edilmesi

Predictionfabricsof air permeability of knitted by means of computational fluid dynamics

Serin MEZARCIÖZ
Serkan MEZARCIÖZ
R.Tuğrul OĞULATA
Pages
202–211
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

At the end of study, it is found that experimental results are highly compatible with the numerical CFD results.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of current study is to develop a novel approach for simulation of the single jersey fabrics air permeability based on the present abilities of Computational Fluid Dynamics (CFD) systems. 3D simulation of the through-thickness permeability of knitted fabrics was performed by using FLUENT® software package.
📊
Key Findings & Data:The numerical results were verified on the basis of experimental data.
💡
Conclusion & Impact:At the end of study, it is found that experimental results are highly compatible with the numerical CFD results.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The aim of current study is to develop a novel approach for simulation of the single jersey fabrics air permeability based on the present abilities of Computational Fluid Dynamics (CFD) systems. 3D simulation of the through-thickness permeability of knitted fabrics was performed by using FLUENT® software package. The numerical results were verified on the basis of experimental data. At the end of study, it is found that experimental results are highly compatible with the numerical CFD results.

Özet

Bu çalışmanın amacı, Hesaplamali Akışkanlar Dinamiği (HAD) sistemlerinin bugünkü yeteneklerine gore, suprem kumaş hava geçirgenliği simülasyonu için yeni bir yaklaşım geliştirmektir. Örme kumaşların kalınlık boyunca geçirgenliğinin 3 boyutlu simülasyonu FLUENT® yazılım paketi kullanılarak gerçekleştirilmiş, nümerik sonuçlar deneysel veriler temelinde doğrulanmıştır. Çalışma sonunda, deneysel sonuçların nümerik HAD sonuçları ile büyük ölçüde uyumlu olduğu bulunmuştur.

🔖

Cite This Article

MEZARCIÖZ, S., MEZARCIÖZ, S., OĞULATA, R. (2022). Hesaplamalıkumaşlarınakışkanlar dinamiği yardımıyla örme hava geçirgenliğinin tahmin edilmesi. Tekstil ve Konfeksiyon, Cilt: 24 - Sayı: 2, 202–211. https://ajindex.com/articles/596771

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Karaguzel, B., 2004, “Characterization and Role of Porosity in Knitted Fabrics”, MSc Thesis, North Carolina State University, Department of Textile Engineering, Chemistry and Science, p.132. 2.Benltoufa, S., Fayala, F., Cheikhrouhou, M., and Ben Nasrallah, S., 2007, “Porosity Determination of Jersey Structure”, AUTEX Research Journal, Vol:7, No:1, pp:63-69. 3.Angelova, R.A., Stankov, P., Simova, I., and Aragon, I., 2011, “Three Dimensional Simulation of Air Permeability of Single Layer Woven Structures”, Central European Journal of Engineering, 1(4), pp:430-435. 4.Ogulata, R.T, Mavruz, S., 2010, “Investigation of Porosity and Air Permeability Values of Plain Knitted Fabrics”, Fibres & Textiles in Eastern Europe,Vol.18 No.5 (82), pp.71-75. 5.Wilbik-Halgas, B., Danych, R., Wiecek, B., and Kowalski, K., 2006, “Air and Water Vapour Permeability in Double-Layered Knitted Fabrics with Different Raw Materials”, Fibres & Textiles in Eastern Europe, Vol:14, No:3(57), pp: 77-80. 6.Dias, T., and Delkumburewatte, G.B., 2008, “Changing Porosity of Knitted Structures by Changing Tightness”, Fibers and Polymers, Vol:9, No:1, pp:76- 79. 7.Mavruz, S., and Oğulata, R.T., 2009, “Investigation and Statistical Prediction of Air Permeability of Cotton Knitted Fabrics”, Tekstil ve Konfeksiyon, Vol:19(1), pp:29-38. 8.Vassiliadis, S., Kallivretaki, A., Cay, A., Dimitrofski, K., 2013, “Computational Modeling of the Air Permeability of Fabrics”,5th International Conference of Applied Research in Textile, CIRAT-5, Monastir, Tunisia, pp:12-13. 9.Mullins, B.J., King, A.J.C., and Braddock, R.D., 2011, “Modelling the Influence of Filter Structure on Efficiency and Pressure Drop in Knitted Filters”, 19th International Congress on Modelling and Simulation, Perth, Australia, pp:7. 10.Cimilli, S.D., Deniz, E., Candan, C., and Nergis, B.U., 2012, “Determination of Natural Convective Heat Transfer Coefficient for Plain Knitted Fabric via CFD Modeling”, Fibres & Textiles in Eastern Europe, Vol.20 No.1 (90), pp.42-46. 11.TS 391 EN ISO 9237, 1999, Textiles-Determination of the Permeability of Fabrics to Air, Turkish Standards Institution, Ankara. 12.TS EN 14970, 2006, Textiles - Knitted fabrics - Determination of Stitch Length and Yarn Linear Density in Weft Knitted Fabrics, Turkish Standards Institution, Ankara. 13.TS EN 14971, 2006, Textiles - Knitted fabrics - Determination of Number of Stitches per Unit Length and Unit Area, Turkish Standards Institution, Ankara. 14.TS 7128 EN ISO 5084, 199