It was found that frequency improves the thickening condition.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:The design of a vibration beat-up mechanism with a flexible reed and magnetoelectric vibration exciter is presented.
📊
Key Findings & Data:A simulation model consisting of a thickening zone, working elements and electrically excited vibrations is elaborated.
💡
Conclusion & Impact:It was found that frequency improves the thickening condition.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
The design of a vibration beat-up mechanism with a flexible reed and magnetoelectric vibration exciter is presented. A simulation model consisting of a thickening zone, working elements and electrically excited vibrations is elaborated. The results of the simulations of the vibration thickening of fabric are presented. The impact of the reed vibration in relation to the decrease in the dynamic loads of the warp or the increase in the produced fabric thickening of the weft is analysed. It was found that frequency improves the thickening condition. However, there is a threshold frequency beyond which the thickening condition cannot be further improved.
🔖
Cite This Article
KUCHAR, M. (2022). THE IMPACT OF THE FREQUENCY OF REED VIBRATIONS ON IMPROVING THE CONDITIONS IN THICKENING DENSE TECHNICAL FABRICS. Tekstil ve Konfeksiyon, Cilt: 26 - Sayı: 4, 380–384. https://ajindex.com/articles/596747
Bajay A. 2012 "Identify customization, module opportunities for machines and parameterize the construction". Case of the Trans Cent TCR loom Stockholm, Royal Institute of Technology (KTH
Kossowski Z., Kopias K. 2006 "Magnetoelectric Driving Device for Displacements of a Guide Needle Bar in a Weaving Loom". Fibres & Textiles in Eastern Europe; No 2, (56):pp. 76-78 4. Kuchar M. 2013 "The vibration beat-up in the weaving loom". Scientific Bulletin of The Lodz University of Technology (in Polish
Nosek S. 1994 "The dynamics of fabric forming on the loom at high weaving rates". Indian Journal of Fibre & Textile Research Vol. 19, pp. 125-138 6. Kuchar M. 2013 "Vibratory Thickening of Weft Threads in a Weaving Loom - Simulation Tests". Fibres & Textiles in Eastern Europe; 21, 5(101) pp. 59-64 7. Kuchar M. 2015 "Comparative study on the conditions of thickening woven fabrics with a vibrating reed". Tekstil ve Konfeksiyon 25(2): pp.155-159 8. Wojewoda J. 2008 "Hysteretic effects in Dry Friction". Scientific Bulletin of Lodz University of Technology 9. Kuchar M., Michalak A. 2012 "Cling of threads as a parameter accompanying the acting force during weaving". Textiles Review: Textiles, Clothing and Leather 7, pp. 19- 22 10. Svetnickiene V., Ciukas R. 2009 "Investigation of friction properties of yarns from natural fibres". Mechanika, No.1(75
Krishnamoorthy S.G.; Skiedraite I. 2015 "Development of electromagnetic damper" Mechanika. Vol. 21(3):pp. 226-233
Kossowski Z. 2001 "Study on the forced electromagnetically valve motion in the valve train". Lodz University of Technology, (In Polish)